查看标准

适用范围：<p>The water content of a soil is used throughout geotechnical engineering practice both in the laboratory and in the field. The use of Test Method D 2216<astmref rid="a00002"> for water content determination can be time consuming and there are occasions when a more expedient method is desirable. The use of a microwave oven is one such method.</p> <p>The principal objection to the use of the microwave oven for water-content determination has been the possibility of overheating the soil, thereby yielding a water content higher than would be determined by Test Method D 2216<astmref rid="a00002">. While not eliminating this possibility, the incremental drying procedure described in this test method will minimize its effects. Some microwave ovens have settings at less than full power, which can also be used to reduce overheating.</p> <p>The behavior of a soil, when subjected to microwave energy, is dependent on its mineralogical compositions, and as a result no one procedure is applicable for all types of soil. Therefore, the procedure recommended in this test method is meant to serve as a guide when using the microwave oven.</p> <p>This test method is best suited for minus No. 4 sized material. Larger size particles can be tested; however, care must be taken because of the increased chance of particle shattering.</p> <p>The use of this method may not be appropriate when highly accurate results are required, or the test using the data is extremely sensitive to moisture variations.</p> <p>Due to the localized high temperatures that the specimen is exposed to in microwave heating, the physical characteristics of the soil may be altered. Degregation of individual particles may occur, along with vaporization or chemical transition. It is therefore recommended that samples used in this test method not be used for other tests subsequent to drying.</p> <p class="desc"> <span class="smallcap">Note</span> 18212;The quality of the results produced by this test method is dependent on the competence of the personnel performing it and the suitability of the equipment and facilities used. Agencies that meet the criteria of Practice D 3740<astmref rid="a00003"> are generally considered capable of competent and objective testing. Users of this test method are cautioned that compliance with Practice D 3740<astmref rid="a00003"> does not in itself ensure reliable results. Reliable results depend on many factors; Practice D 3740<astmref rid="a00003"> provides a means of evaluating some of those factors.</p><p id="s00002">1.1 This test method outlines procedures for determining the water (moisture) content of soils by incrementally drying soil in a microwave oven.</p> <p id="s00003">1.2 This test method can be used as a substitute for Test Method D 2216<astmref rid="a00002"> when more rapid results are desired to expedite other phases of testing and slightly less accurate results are acceptable.</p> <p id="s00004">1.3 When questions of accuracy between this test method and Test Method D 2216<astmref rid="a00002"> arise, Test Method D 2216<astmref rid="a00002"> shall be the referee method.</p> <p id="s00005">1.4 This test method is applicable for most soil types. For some soils, such as those containing significant amounts of halloysite, mica, montmorillonite, gypsum or other hydrated materials, highly organic soils, or soils in which the pore water contains dissolved solids (such as salt in the case of marine deposits), this test method may not yield reliable water content values.</p> <p id="s00006">1.5 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this test method.</p> <p id="s89476">1.6 Refer to Practice D 6026<astmref rid="a00005"> for guidance concerning the use of significant figures. This is especially important if the water content will be used to calculate other relationships such as moist mass to dry mass or vice versa, wet unit weight to dry unit weight or vice vers......