查看标准

请选择需要导出的字段:

BS 598-110-1998

道路和其它铺砌区用沥青混合料的取样和检验.轮辙比例和深度测定的试验方法

Probenahme und Untersuchung von bituminoesen Mischgut fuer Strassen und andere befestigte Verkehrsflaechen. Testmethoden zur Bestimmung der Radfuehrung Sampling and Examination of Bituminous Mixtures for Roads and Other Paved Areas-Part 110:Methods of Test for the Determination of Wheel-Tracking Rate and Depth Echantillonnage et controle des melanges bitumineux pour chaussees et autres surfaces pavees. Methode d'analyse pour la determination du taux et de la profondeur de sillage des roues AMD 1

适用范围:1 This part of BS 598 specifies a method for determining the susceptibility of bituminous materials to plastic deformation at high road temperatures under pressures similar to those experienced on the road. The method applies to any bituminous wearing course material laid at a nominal thickness of up to 50 mm and is carried out on samples cored from laid and compacted material. 2 The test is usually carried out at a temperature of either 45 ℃ or 60 ℃, but other test temperatures can be used. NOTE 1 For research purposes, it may be necessary to determine the wheel-tracking rate of laboratory-prepared and compacted mixtures. However, this requires a carefully controlled and detailed procedure for specimen preparation and compaction, which is not included in this standard, but which, it is hoped, will be described in a future Draft for Development Nevertheless, with the necessary changes, this method can be used for laboratory-prepared specimens. NOTE 2 Precision data determined from experiments are given in annex A.

实施日期: 1998-11-15

ICS分类号: 75.140,93.080.10 - 石油及相关技术

标准组织: BS - 英国标准学会标准

全文来源: WF

中文关键词: 沥青 沥青制品 施工材料 尺寸测量 检验(质量保证) 公式(数学) 检验 数学计算 机械测试 公路 铺砌区 路面(道路) 塑性变形 精密度 压力 报告 道路 抽样方法 试样制备 温度 试验设备 测试条件 厚度 跟踪 车轮

语种: 汉语

页数: 14

标准解读