查看标准

请选择需要导出的字段:

BS 7081-1-1989

利用IMFM法以252次磁通变换/mm(6400次磁通变换/in)速率录制的数据交换用6.30mm(0.25in)磁带盒的使用和制造指南.机械、物理和磁特性

Ausfuehrung und Anwendung von 6,30-mm-(0,25 in)-Magnetbandkassetten fuer den Datenaustausch unter Verwendung von invertierter modifizierter Wechseltaktschrift (IMFM) mit 252 Flusswechseln/mm (6400 ftpi). Leitfaden fuer mechanische,physikalische und elektromagnetische Eigenschaften Guide to Construction and Use of 6.30 mm (0.25 in) Magnetic Tape Cartridge for Data Interchange,Using IMFM Recording at 252 ft pmm (6400 ftpi) Part 1:Mechanical,Physical and Magnetic Properties Construction et utilisat

适用范围:ISO 8063 specifies the characteristics of a tape cartridge using 6,30 mm (0.25 in) wide magnetic tape for data interchange be-tween data processing systems. ISO 8063/2 specifies the quality of the recorded signals, and the track format to be used on a 6,30 mm (0.25 in) magnetic tape cartridge recorded at 252 ftpmm (6 400 ftpi) using IMFM recording and the start/stop mode of operation. This part of ISO 8063 specifies the dimensional, physical and magnetic characteristics of the cartridge, and the track layout. Together with the labelling scheme specified in ISO 4341, ISO 8063/1 and ISO 8063/2 provide for full data interchange between data processing systems. NOTE —Numeric values in the SI and/or Imperial measurement system in this part of ISO 8063 may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should be neither intermixed nor reconverted. The original design was made using the Imperial measurement system. ISO 8063 applies to cartridges used for data interchange. Where it applies for testing only, this is specifically stated.

实施日期: 1989-01-01

中标分类号: L64 - 电子元器件与信息技术 - 数据媒体

ICS分类号: 35.220.23 - 信息技术、办公设备

标准组织: BS - 英国标准学会标准

全文来源: WF

中文关键词: 数据传输 试验条件 设计 宽度 数据传送 光学测量 数据记录 作标记 信息交流 透射率 盒式磁带 尺寸 储存 磁带 传输 磁记录 记录设备部件 工作环境 记录特性 试验设备 磁带机 抗拉试验 道速 电阻 记录道 抗拉荷载 附着力试验 缺陷

语种: 汉语

页数: 38

标准解读