查看标准

请选择需要导出的字段:

BS EN 60695-11-20-1999

着火危险试验 第11-20部分:试验火焰 500W火焰试验方法 修正14840:2003年12月5日;替代BS 2782-140C:1993; IEC 60695-11-20:1999

Fire Hazard Testing-Part 11-20:Test Flames-500 W Flame Test Methods Supersedes BS 2782-140C:1993;IEC 60695-11-20:1999;

适用范围:This part of IEC 60695 specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of specimens made from plastics and other non-metallic materials, as well as their resistance to burn-through when exposed to a flame ignition source of 500 W nominal power. This method is applicable to both solid materials and cellular plastic materials having an apparent density of 250 kg/m<up3> or greater when determined in accordance with ISO 845. It does not apply to thin materials that shrink away from the applied flame without igniting, for which ISO 9773 should be used. The test method described is intended to characterize material performance, for example for quality-control purposes, and is not intended to assess the behaviour to fire of building materials or furnishings. It may be used for the pre-selection of a material, provided that positive results are obtained at a thickness which equals the smallest thickness used in the application. The results obtained provide some information about the behaviour of plastic materials in service, but can never by themselves assure safe performance in service. NOTE - Test results are influenced by material components, e.g. pigments, fillers, and fire retardants, and properties such as the direction of anisotropy and the molecular mass. This test method provides a classification system (see 8.3.7) which may be used for quality assurance or the pre-selection of component materials of products.

实施日期: 1999-05-15

中标分类号: K04 - 电工 - 基础标准和通用方法

ICS分类号: 13.220.40,29.020 - 环境和保健、安全

标准组织: BS - 英国标准学会标准

全文来源: WF

中文关键词: 实验室试验 着火危险试验 泡沫塑料 试验用图表 塑料 非金属的 试验 试验用火焰 火焰 火灾危险 耐火性 塑料制品 破坏性大火 质量保证 电气工程 燃烧试验 电气设备 火焰表面传播 特性 定义

语种: 汉语

页数: 24

标准解读