查看标准

请选择需要导出的字段:

IEC 60664-5-2007

低压系统内设备的绝缘配合 第5部分:小于或等于2mm的间隙距离和漏电距离的综合测定法

Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm

适用范围:Specifies the dimensioning of clearances and creepage distances for spacings equal to or less than 2 mm for printed wiring board and equivalent constructions, where the clearance and the creepage distance are identical and are along the surface of solid insulation. The dimensioning in this standard is more precise than that provided by IEC 60664-1. However, if the precision provided by this standard is not required, IEC 60664-1 may be applied instead. This standard is based on the following criteria for dimensioning: - minimum clearances independent of the micro-environment; - minimum creepage distances for pollution degrees 1, 2 and 3 to avoid failure due to tracking; - minimum creepage distances to avoid flashover across the insulating surface. A test method is specified for allocating unclassified insulating material to the relevant water adsorption group. The following major technical changes are: - Amendment of Japanese mains conditions with regard to the rated impulse voltages, the rationalized voltages and the nominal voltages of supply systems for different modes of overvoltage control. - Amendment of dimensioning of clearances smaller than 0,01 mm. Alignment of the table and the corresponding formula regarding test voltages for verifying clearances at different altitudes. - Amendment of interpolation of the creepage distance values for functional insulation. - Revision of the former Clause 4 "Tests and measurements" (now Clause 6) to achieve a more detailed description of the tests and their purpose, the test equipment and possible alternatives. Has the status of a basic safety publication in accordance with IEC Guide 104.

发布日期: 2007-07-30

实施日期: 2007-07-30

中标分类号: K04 - 电工 - 基础标准和通用方法

ICS分类号: 29.080.30 - 电气工程

标准组织: IEC - 国际电工委员会标准

全文来源: WF

中文关键词: 间隙距离 间隙 漏电距离 定义 尺寸选定 电器 电气工程 电气设备 电绝缘材料 电驱动装置 电子设备及元件 设备 湿度 绝缘材料 绝缘配合 绝缘件 集成电路 漏电路径 低电压 低压装置 低压设备 低压绝缘子 测量 印制电路 额定值 研究方法 规范(验收) 调查 测试 电压

语种: 汉语

页数: 93

· 您可以在购买后查看以下字段:
发布单位、代替关系
购买

标准解读