查看标准

请选择需要导出的字段:

IEC 61557-12-2007

交流1000V和直流1500V以下低压配电系统电气安全 防护检测的试验、测量或监控设备 第12部分:性能测量和监控装置(PMD)

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)

适用范围:Specifies requirements for combined performance measuring and monitoring devices that measure and monitor the electrical parameters within electrical distribution systems. These requirements also define the performance, in single and three-phase a.c. or d.c. systems having rated voltages up to 1 000 V a.c. or up to 1 500 V d.c. These devices are fixed installed or portable. They are intended to be used indoors and/or outdoors. This standard is not applicable for: - electricity metering equipment that complies with IEC 62053-21, IEC 62053-22 and IEC 62053-23. Nevertheless, uncertainties defined in this standard for active and reactive energy measurement are derived from those defined in the IEC 62053 standards series. - simple remote relays or simple monitoring relays. This standard is intended to be used in conjunction with IEC 61557-1 (unless otherwise specified), which specifies the general requirements for measuring and monitoring equipment, as required in IEC 60364-6. The standard does not include the measurement and monitoring of electrical parameters defined in Parts 2 to 9 of IEC 61557 or in IEC 62020. Combined performance measuring and monitoring devices (PMD), as defined in this standard, give additional safety information, which aids the verification of the installation and enhances the performance of the distribution systems. For instance, those devices help to check if the level of harmonics is still compliant with the wiring systems as required in IEC 60364-5-52. The combined performance measuring and monitoring devices (PMD) for electrical parameters described in this standard are used for general industrial and commercial applications. A PMD-A is a specific PMD complying with requirements of IEC 61000-4-30 class A, which may be used in "power quality assessment" applications.

发布日期: 2007-08-15

实施日期: 2007-08-15

中标分类号: N20,F20 - 仪器、仪表

ICS分类号: 17.220.20 - 电和磁量值的测量 ; 29.080.01 - 电绝缘综合 ; 29.240.01

标准组织: IEC - 国际电工委员会标准

全文来源: WF

中文关键词: 控制仪器 定义 直流装置 电能分布 电气工程 电气装置 电气性能 电性质和电现象 电气安全 谐波电流 谐波 额定电压装置 干扰抑制 低压电源 低压装置 测量设备 测量不确定度 监测装置 过电压保护 参数 性能要求 性能测试 保护措施 合格试验 规范(验收) 测试 电压

语种: 汉语

页数: 157

标准解读