查看标准

请选择需要导出的字段:

IEC 61643-311-2001

低压电涌保护器的元件 第311部分:气体放电管(GDT)规范

Components for Low-Voltage Surge Protective Devices. Part 311:Specification for Gas Discharge Tubes (GDT) Composants Pour Parafoundres Basse Tension. Partie 311:Specifications Pour Les Tubes A Decharge Dans Un Gaz (TDG) First Edition

适用范围:Gas discharge tubes (GDTs) are used for applications up to 1 000 V a.c. or 1 500 V d.c. in communication or signalling circuits. They are defined as a gap, or series of gaps, in an enclosed discharge medium other than air. They are designed to protect apparatus or personnel, or both, from high transient voltages. This standard does not specify requirements applicable to complete surge protective devices, nor does it specify total requirements for GDTs employed within electronic devices, where precise coordination between GDT performance and surge protective device withstand capability is highly critical. This part of IEC 61643 - deals with GDTs having two or three electrodes; - does not deal with mountings and their effect on GDT characteristics. Characteristics given apply solely to GDTs mounted in the ways described for the tests; - does not deal with mechanical dimensions; - does not deal with quality assurance requirements; - may not be sufficient for GDTs used on high-frequency or multi-channel systems; - does not deal with electrostatic voltages; - does not deal with GDTs connected in series with voltage-dependent resistors in order to limit follow-on currents in electrical power systems; - does not deal with hybrid or composite GDT devices.

实施日期: 2001-10-01

中标分类号: L35 - 电子元器件与信息技术 - 电真空器件综合

ICS分类号: 31.100,33.040.99 - 电子学

标准组织: IEC - 国际电工委员会标准

全文来源: WF

中文关键词: 规范(验收) 定义 低电压 输出测定 电气工程 过电压保护装置 试验 气体放电 气体放电管 低压熔断器 电性质和电现象 电压保护 作标记

语种: 汉语

页数: 50

标准解读