QJ 2097-1991

出口的产品设计文件管理规定

发布日期：1991-03-23  实施日期：1991-07-31

GB/T 16992-1997

飞机维护及其安全警告标志

Aircraft--Identification of servicing,maintenance,ground handling and safety/hazard points

实施日期：1998-05-01

AECMA PREN 2707-1985

航空和航天系列铝合金7075-T6510冷拉棒材和板材a或1,2mm小于或等于直径D小于或等于125mm

Aerospace Series Aluminium Alloy 7075-T6510 Bar and Section 1,2 Less Than or Equal to (a or D) Less Than or Equal to 125 mm with Peripheral Coarse Grain Control Edition 1

发布日期：1985-05-01  实施日期：1985-05-01

QJ 868.2-1984

塑料挤压模具 矩形塑料压模

发布日期：1984-09-05  实施日期：1986-03-01

DIN EN 4383-1998

航空和航天.耐热合金NI-CH2601,非热处理.再熔块

Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) non heat treated - Remelting stock

SAE AMS 3793/9A-1996

2.00英寸(50mm), 0.12-1.10盎司/码(3.7-34.1g/m)中模量对芳族聚酰胺织带和带状织物

Tape and webbing,textile,para-aramid intermediate modulus 2.00 inches (50mm),0.12 to 1.10 ounces per yard (3.7 to 34.1 g/m)

实施日期：1996-03-01

NF L21-110-1975

铆钉用 T４０非合金钛线材 技术规范

Wires for rivets in T40 pure titanium. Technical specification.

实施日期：1975-09-01

NF EN 3285-1994

航空航天系列.飞机骨架滚动轴承.刚性单排钢质镉板球轴承.直径系列0和2.标准公隙.尺寸和负荷

Aerospaces series. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2. Normal clearance category. Dimensions and loads.

实施日期：1994-09-01

ISO 7718-2-2009

航空器 登机桥连接的乘客门接口要求 第2部分:上舱门

Aircraft -- Passenger doors interface requirements for connection of passenger boarding bridge -- Part 2: Upper deck doors

适用范围：ISO 7718-2:2009 specifies minimum requirements for dimensions and unobstructed space around upper deck passenger doors of future types of civil-passenger transport aircraft when they are intended to be...

发布日期：2009-03-01  实施日期：2009-03-01

SAE AMS 3904/9A-1999

0.9%精制的3000但尼尔(3300 Dtex)中模量有机纤维（对芳族聚酰胺）纱线

Yarn,organic fiber (para-aramid) intermediate modulus 3000 denier (3300 dtex),0.9% finish

实施日期：1999-03-01

NF ISO 12-1988

管道鉴定方法

Aerospace. Pipelines. Identification.

实施日期：1988-04-30

ARINC 738A-1-2001

空中数据惯性参考系统1999包括附录1

Air Data and Inertial Reference System (ADIRS) 1999; Includes Supplement 1

发布日期：2001-07-31 

DIN 65188-1986

航空和航天. 钻合金制复合材料用嵌件; 带MJ螺纹, 小结构封闭式, 螺钉锁紧

Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy

NF L23-310-1977

航空用螺栓螺母 开口销

Aircraft fasteners. Split pins.

实施日期：1977-02-01

SAE AMS 1453-1995(R2004)

飞机内部通用液体消毒剂的清洁剂

Disinfectant cleaner for aircraft interior general purpose liquid

实施日期：1995-03-01

QJ 2548-1993

Ada语言编程格式

发布日期：1993-03-30  实施日期：1993-11-01

DIN EN 2865-1993

航空和航天用铆接螺母

Aerospace series; nuts, anchor, self-locking, floating, two lug, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 <Grad>C

SAE AMS-DTL-23053/17-1999

交联、挠性、阻燃、热收缩、改进的聚烯烃电绝缘套管

Insulation sleeving,electrical,heat shrinkable,flame retarded,modified polyolefin,flexible,crosslinked fsc 5970;should be used instead of mil-dtl-23053/17b,which was cancelled on 16 september 1999

实施日期：1999-07-01

DIN EN 3297-1998

航空和航天.耐热、镍基合金NI-P100HT,自锁、薄壁、MJ螺纹、插销.交货技术条件

Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification; German version EN 3297:1998

适用范围：This document specifies the characteristics, qualification and acceptance requirements for self-locking thin wall inserts with MJ threads in NI-P100HT. It is applicable whenever referenced. wall self-l...

SAE AMS 3249C-1993(R1998)

75-85耐肼基流体的乙丙橡胶

Ethylene propylene (epdm) rubber hydrazine-base-fluid resistant 75. 85

实施日期：1993-10-01