BS EN 10151-2002

弹簧用不锈钢带材 交货技术条件

Federband aus nichtrostenden Staehlen. Technische Lieferbedingungen Stainless steel strip for springs Technical delivery conditions Bandes pour ressorts en aciers inoxydables. Conditions techniques de ...

适用范围：1.1 This European Standard applies to cold rolled narrow strip of thicknesses up to and including 3 mm in rolledwidths less than 600 mm made from the stainless steel grades listed in Table 1. The steel...

实施日期：2002-11-26

DIN EN ISO 16582-2003

带心轴和凸头的开口端的铆钉 Cu/St或Cu/Br或Cu/SSt (ISO 16582:2002)

Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)

BS EN 10088-3-2005

不锈钢.通用耐腐蚀钢制半成品、棒材、杆材、线材、型材和光亮产品的交货技术条件

Nichtrostende Staehle. Technische Lieferbedingungen fuer Halbzeug,Staebe,Walzdraht,gezogenen Draht,Profile und Blankstahlerzeugnisse aus korrosionsbestaendigen Staehlen fuer allgemeine Verwendung Stain...

适用范围：1 This part of EN 10088 specifies the technical delivery conditions for semi-finished products, hot or cold formed bars, rods, wire, sections and bright products of standard grades and special grade...

实施日期：2005-06-30

DIN EN 10272-2008

Stainless steel bars for pressure purposes

实施日期：2008-01-01

DIN EN 10088-3-2005

不锈钢 第3部分:通用和结构用防腐钢棒、钢丝半成品、型材和光亮制品的交货技术条件

Stainless steels - Part 3: Technical delivery conditions for semi-finished products,bars,rods and sections for general purposes

发布日期：2005-09-01  实施日期：2005-09-01

DIN 28085-1994

安装容器和设备用的支承轴颈;尺寸和最大负荷

Lifting lugs on apparatuses for mounting; dimensions and allowable loadings

适用范围：This document applies to lifting lugs on vessels and apparatuses.

DIN 28087-1994

安装容器和仪器用的顶端起重吊耳

Top head type lifting lugs on apparatuses for mounting; dimensions and allowable loadings

适用范围：This document applies to top head type lifting lugs on vessels and apparatuses mainly used in process plants.

BS EN ISO 15983-2002

带有断裂拉伸心轴和伸头钉的开端空心铆钉 A2/A2 校正14321:2003年1月28日

Offene Blindniete mit Sollbruchdorn und Flachkopf. A2/A2 Open end blind rivets with break pull mandrel and protruding head A2/A2 Rivets aveugles a rupture de tige a corps ouvert,a tete bombee. A2/A2 CO...

适用范围：ISO 15983 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an austenitic stainless steel body (A2) a...

实施日期：2002-11-20

BS EN 10263-5-2001

冷加工和冷挤压的钢棒、棍和线 第5部分:不锈钢的交货技术条件

Walzdraht,Staebe und Draht aus Kaltstauch-und Kaltfliesspressstaehlen. Technische Lieferbedingungen fuer nichtrostende Staehle Steel Rod,Bars and Wire for Cold Heading and Cold Extrusion-Part 5:Technic...

适用范围：1 This part of EN 10263 is applicable to round rod, round bars and wire made of stainless steels intended for cold heading and cold extrusion having a diameter up to and including: — 25 mm f...

实施日期：2001-08-15

DIN EN ISO 9445-1-2010

连续冷轧不锈钢 尺寸和形状公差 第1部分:窄带和切割长度

Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths

适用范围：This part ISO 9445 specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel narrow strip, in thicknesses of up to and including 3 mm and in rolling widths of less th...

实施日期：2010-06-01

EN ISO 17660-2-2006

Welding. Welding of reinforcing steel. Part 2:Non load-bearing welded joints

实施日期：2006-09-01

DIN 13109-2010

Medical instruments - Wire cutting scissors without carbide inserts

实施日期：2010-02-01

NF E29-825-2007

管道 单咬边金属保护软管( 无垫片,不密封,圆截面,镀锌钢制)

Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar.

DIN EN 10217-7-2005

压力焊接钢管 交货技术条件 第7部分:不锈钢管

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes

NF A89-320-2-2008

Welding - Welding of reinforcing steel - Part 2 : non-load bearing welded joints.

BS EN ISO 17660-1-2006

Welding. Welding of reinforcing steel. Load-bearing welded joints

实施日期：2008-03-31

BS EN 3635-2008

Luft-und Raumfahrt. Rohranschlussenden geschwei?t. Masse Aerospace series. Weld lip. Geometrical configuration Série aérospatiale. Embout. souder. Configuration géometrique

实施日期：2008-05-30

NF A35-540-2-2010

Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2 : wide strip and plate/sheet.

ISO 12289-2003

航空航天 耐蚀钢实心铆钉 采购规范

Aerospace. Rivets,solid,in corrosion-resisting steel procurement specification first edition

适用范围：This International Standard specifies the characteristics and quality assurance requirements for solid rivetsmade in corrosion-resisting steel for aerospace construction.It is applicable whenever it is...

实施日期：2003-08-01

DIN EN ISO 16584-2003

带心轴和凸头的开口端的铆钉 NiCu/St或Cu/SSt (ISO 16584:2002)

Open end blind rivets with break pull mandrel and protruding head; NiCu/St or NiCu/SSt (ISO 16584:2002)

适用范围：The document specifies dimensions of open end blind rivets with break pull mandrel and protruding head and with material combinations Ni/Cu/St or NiCu/SSt.