DIN EN ISO 25178-601-2011

产品几何量技术规范(GPS) 表面结构:区域 第601部分:接触式（触针)仪器的标称特性

Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010); German version EN ISO 25178-601:2010

适用范围：This part of ISO 25178 defines the metrological characteristics of contact (stylus) areal surface texture measuring instruments.

实施日期：2011-01-01

ISO 3040-2009

产品几何量技术规范(GPS) 尺寸和公差注法 圆锥

Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones

适用范围：ISO 3040:2009 establishes the definition of cones and specifies the graphical symbol to be used for their indication and methods for their dimensioning and tolerancing. For the purposes of ISO 3040:200...

发布日期：2009-12-01  实施日期：2009-12-01

DIN 874-2-2003

几何产品尺寸(GPS) 直尺 第2部分:刃口直尺、尺寸、交货技术条件

Geometrical Product Specification (GPS) - Straight edges - Part 2: Knife Edge Straight Edges; Dimensions, Technical Conditions of Delivery

适用范围：The standard applies for the knife edge sraight edges with a lenght up to 1000 mm.

NF E04-565-2010

技术图纸.标注尺寸和公差.非刚性的零件

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts.

BS EN ISO 286-2-2010

Geometrische Produktspezifikation (GPS). ISO-Toleranzsystem für L?ngenma?e. Tabellen der Grundtoleranzgrade und Grenzabma?e für Bohrungen und Wellen Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Part 2:Tables of standard tolerance classes and limit deviations for holes and shafts Spécification géométrique des produits (GPS). Système de codification ISO pour les tolérances sur les tailles linéaires. Tableaux des classes de tolérance normalisées et des éc

实施日期：2010-07-31

ISO 16610-85-2013

Geometrical product specifications (GPS) -- Filtration -- Part 85: Morphological areal filters: Segmentation

发布日期：2013-02-01  实施日期：2013-02-01

ISO 10579-2010

产品几何量技术规范(GPS) 尺寸和公差注法 非刚性零件

Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Non-rigid parts

适用范围：ISO 10579:2010 gives rules for dimensioning and tolerancing non-rigid parts where restraining of features is required during verification of dimensions and tolerances specified on a drawing.

发布日期：2010-03-01  实施日期：2010-03-01

ISO/TR 16015-2003

产品几何量技术规范(GPS) 由温度影响引起长度测量不确定度的系统误差和作用

Geometrical product specifications (GPS) -- Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences

适用范围：ISO/TR 16015:2002 defines procedures for the determination of errors, appropriate corrections and the evaluation of measurement uncertainty contributors due to thermal influences in the performance of ...

发布日期：2003-03-01  实施日期：2003-03-01

DIN 2246-2-2008

Geometrical product specifications (GPS) - "GO" plug gauges - Part 2: For holes over 120 mm up to 200 mm nominal diameter

实施日期：2008-07-01

EN ISO 25178-6-2010

Geometrical product specifications (GPS). Surface texture:Areal. Part 6:Classification of methods for measuring surface texture

实施日期：2010-02-01

NF E04-552-2006

技术图 确定几何公差 综合,定义,符号,图上的说明

Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out.

BS DD ISO/TS 16610-41-2008

Geometrische Produktspezifikation (GPS). Filterung. Morphologische Profilfilter. Filter mit Kreisscheibe und horizontaler Strecke Geometrical product specifications (GPS). Filtration. Part 41:Morphological profile filters:Disk and horizontal line-segment filters Spécification géométrique des produits (GPS). Filtrage. Filtres de profil morphologiques. Filtre disque et filtre segment de droite horizontal

实施日期：2008-05-30

NF E11-050-2006

长度计量仪器.带径向收缩式套筒的机械千分表.技术要求--试验方法

Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges.

NF E11-150-2-2010

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2 : CMMs used for measuring linear dimensions.

EN ISO 10579-2013

几何产品规范(GPS) 尺寸和公差 非刚性零件

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts

实施日期：2013-07-01

NF E02-100-2-2010

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts.

DIN EN ISO 1-2002

几何产品规范(GPS) 几何产品规范和校验的标准温度

Geometrical product specification(GPS) - standard reference temperature for geometrical product specification and verification

适用范围：The standard specifies the standard reference temperature for geometrical product specifications. It does not require that all calibrations of metrological characteristics of measuring equipment, workp...

NF E04-001-2-2004

Geometrical product specifications (GSP) - General concepts - Part 2 : basic tenets, specifications, operators and uncertainties.

ISO/TS 17450-2-2002

产品几何量技术规范(GPS) 一般概念 第2部分:基本原则、规范、操作人员和不确定度

Geometrical product specifications (GPS) -- General concepts -- Part 2: Basic tenets, specifications, operators and uncertainties

适用范围：ISO/TS 17450-2 defines terms related to specifications, operators (and operations) and uncertainties used in geometrical product specifications (GPS) standards, presents the basic tenets of the GPS phi...

发布日期：2002-10-01  实施日期：2002-10-01

ISO 5436-2-2012

产品几何量技术规范(GPS) 表面结构:轮廓法 测量标准 第2部分:软件测量标准

Geometrical product specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 2: Software measurement standards

发布日期：2012-10-01  实施日期：2012-10-01