检索结果

BS EN ISO 14660-1-2000

几何产品规范(GPS) 几何特征第1部分:一般术语和定义连同BS 8888及其附录A和B中所列欧洲标准和国际标准,替代BS 308的所有部分

Geometrische Produktspezifikation (GPS). Geometrieelemente Grundbegriffe und Definitionen Geometrical Product Specifications (GPS). Geometrical features. Part 1:General terms and definitions Specificat...

适用范围：This part of ISO 14660 defines general terms for geometrical features of workpieces.

实施日期：2000-07-15

添加收藏

导出文件

ISO 25178-701-2010

产品几何量技术规范(GPS) 表面结构:区域第701部分:接触式(触针)仪器的校准和测量标准

Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 701: Calibration and measurement standards for contact (stylus) instruments

适用范围：ISO 25178-701:2010 specifies the characteristics of material measures used as measurement standards, the estimation methods of the residual errors, and the calibration methods and tests for acceptance ...

发布日期：2010-07-01 实施日期：2010-07-01

添加收藏

导出文件

EN ISO 1302-2002

Geometrical Product Specifications (GPS). Indication of Surface Texture in Technical Product Documentation ISO 1302:2002

实施日期：2002-02-01

添加收藏

导出文件

NF E11-150-6-2002

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 : estimation of errors in computing Gaussian associated features.

添加收藏

导出文件

BS EN ISO 14660-2-2000

几何产品规范(GPS) 几何特征第2部分:圆柱体和圆锥体的提取中线,提取中心面,提取要素的局部尺寸连同BS 8888及其附录A和B中所列欧洲标准和国际标准,替代BS 308的所有部分

Geometrische Produktspezifikationen (GPS). Geometrieelemente. Erfasste mittlere Linie eines Zylinders und eines Kegels,erfasste mittlere Flaeche,oertliches Mass eines erfassten Geometrieelementes Geome...

适用范围：This part of ISO 14660 defines a number of extracted features of workpieces. It specifies conditions for default definitions, i.e. when no other definitions are specified on the drawing by an extended ...

实施日期：2000-07-15

添加收藏

导出文件

BS EN ISO 11562-1997

Geometrische Produktspezifikationen (GPS). Oberfl?chenbeschaffenheit:Tastschnittverfahren. Me?technische Eigenschaften von phasenkorrekten Filtern Geometrical Product Specifications (GPS). Surface texture:Profile method. Metrological characteristics of phase correct filters Spécification géométrique des produits (GPS). Etat de surface:Méthode du profil. Caractéristiques métrologiques des filtres. phase correcte CORR 9952:May 1998;CORR:June 30,2009 [:BSI BS ISO 11562]

实施日期：1997-05-15

添加收藏

导出文件

DIN 878-2006

产品几何量技术规范(GPS) 机械百分表计量性能极限

Geometrical product specifications (GPS) - Mechanical dial gauges - Limits for metrological characteristics

适用范围：This standard applies to mechanical gauges as in DIN EN ISO 463 having scale intervals of 0,01 mm and a measuring range of 0,4 mm; 0,8 mm; 3 mm; 5 mm and 10 mm. It specifies the numerical values for li...

实施日期：2006-06-01

添加收藏

导出文件

BS DD ISO/TS 16610-1-2008

Geometrische Produktspezifikation (GPS). Filterung. ?bersicht und Grundbegriffe Geometrical product specifications (GPS). Filtration Part 1:Overview and basic concepts Spécification géométrique des produits (GPS). Filtrage. Vue d'ensemble et concepts de base

实施日期：2008-12-31

添加收藏

导出文件

NF A87-000/A1-2004

Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances.

添加收藏

导出文件

ISO 286-2-2010

产品几何量技术规范(GPS) 线性尺寸公差的ISO编码系统第2部分:孔和轴的标准公差等级和极限偏差表

Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

适用范围：ISO 286-2:2010 gives values of the limit deviations for commonly used tolerance classes for holes and shafts calculated from the tables given in ISO 286?1. ISO 286-2 covers values for the upper limit d...

发布日期：2010-06-01 实施日期：2010-06-01

添加收藏

导出文件

ISO 10360-6 CORR 1-2007

产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和重新验证试验第6部分:高斯相关特征计算中的误差估计

Geometrical product specifications (gps). Acceptance and reverification tests for coordinate measuring machines (cmm). Part 6:Estimation of errors in computing gaussian associated features

适用范围：This is standard about Geometrical Product Specifications (GPS) — Acceptance andreverification tests for coordinate measuring machines(CMM) —Part 6:Estimation of errors in computing Gaussian associated...

实施日期：2007-05-01

添加收藏

导出文件

ISO 286-1-2010

产品几何量技术规范(GPS) 线性尺寸公差的ISO编码系统第1部分:公差、偏差和配合的基础

Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits

适用范围：ISO 286-1:2010 establishes the ISO code system for tolerances to be used for linear sizes of features of the following types: a) cylinder; b) two parallel opposite surfaces. ISO 286-1:2010 defines the ...

发布日期：2010-04-01 实施日期：2010-04-01

添加收藏

导出文件

EN ISO 10360-2-2009

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 2:CMMs used for measuring linear dimensions

实施日期：2009-12-01

添加收藏

导出文件

NF E10-201-1-1999

Geometrical product specification (GPS). Inspection by measurement of workpieces and measuring equipments. Part 1 : decision rules for proving conformance or non-conformance with specifications.

添加收藏

导出文件

ISO 463 CORR 2-2009

Geometrical product specifications (gps). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges technical corrigendum 2 first edition

实施日期：2009-01-15

添加收藏

导出文件

ISO 14978-2006

产品几何量技术规范(GPS) GPS测量设备的一般概念和要求

Geometrical product specifications (GPS) -- General concepts and requirements for GPS measuring equipment

适用范围：ISO 14978:2006 specifies the general requirements, terms and definitions of characteristics of simple GPS measuring equipment, e.g. micrometers, dial gauges, callipers, surface plates, height gauges, g...

发布日期：2006-07-01 实施日期：2006-07-01

添加收藏

导出文件

DIN EN ISO 10360-2-2010

产品几何量技术规范(GPS) 坐标测量机(CMM)的验收检测和复检检测第2部分:用于测量线性尺寸的坐标测量机(CMM)

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions

适用范围：This part of ISO 10360 specifies the acceptance tests for verfying the performance of a coordinate measuring machine (CMM) used for measuring linear dimensions as stated by the manufacturer.

实施日期：2010-06-01

添加收藏

导出文件

DIN 2253-2006

Geometrical product specifications (GPS) - Reference gauges for gap gauges from 1 mm to 315 mm nominal size

实施日期：2006-12-01

添加收藏

导出文件

DIN 2245-1-2008

Geometrical product specifications (GPS) - Limit plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter

实施日期：2008-07-01

添加收藏

导出文件

DIN 866-2006

Geometrical product specifications (GPS) - Graduated rules, rules for manufacturing purposes - Design, requirements

实施日期：2006-12-01

添加收藏

导出文件

检索结果

BS EN ISO 14660-1-2000

ISO 25178-701-2010

EN ISO 1302-2002

NF E11-150-6-2002

BS EN ISO 14660-2-2000

BS EN ISO 11562-1997

DIN 878-2006

BS DD ISO/TS 16610-1-2008

NF A87-000/A1-2004

ISO 286-2-2010

ISO 10360-6 CORR 1-2007

ISO 286-1-2010

EN ISO 10360-2-2009

NF E10-201-1-1999

ISO 463 CORR 2-2009

ISO 14978-2006

DIN EN ISO 10360-2-2010

DIN 2253-2006

DIN 2245-1-2008

DIN 866-2006

查看标准

查看标准