GB 4249-1984

公差原则

Tolerancing principles

GB/T 1958-1980

形状和位置公差 检测规定

Rules for inspection of form and position tolerances

实施日期：1981-07-01

ISO 8116-3-2008

纺织机械与附件 经轴 第3部分:织轴

Textile machinery and accessories -- Beams for winding -- Part 3: Weaver''s beams

适用范围：ISO 8116-3:2008 specifies the main dimensions, mechanical strength and permissible tolerances of form and position for weaver''s beams that are used for weaving preparation as well as for weaving. The ...

发布日期：2008-12-01  实施日期：2008-12-01

NF P04-002-1985

建筑中的公差. 尺寸和位置. 一般规范

Tolerances for building. Dimensions and positions. General specifications.

实施日期：1985-12-01

EN ISO 8062-3-2007

Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Part 3:General dimensional and geometrical tolerances and machining allowances for castings

实施日期：2007-06-01

NF C66-031-2007

Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria.

ISO 1101-2012

产品几何技术规范(GPS) 几何公差 形状、方向、位置和跳动公差标注

Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out

适用范围：ISO 1101:2012 contains basic information and gives requirements for the geometrical tolerancing of workpieces. It represents the initial basis and defines the fundamentals for geometrical tolerancing.

发布日期：2012-04-01  实施日期：2012-04-01

QJ 1749-1989

MJ螺纹紧固件 螺母的形状和位置公差

发布日期：1989-02-25  实施日期：1989-10-01

EN ISO 2692-2006

Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR),least material requirement (LMR) and reciprocity requirement (RPR)

实施日期：2006-12-01

NF J65-511-1985

船用螺旋桨 制连公差 第二部分:直径在０．８０到２．５米之间的螺旋桨

Shipbuilding. Ship screw propellers. Manufacturing tolerances. Part 2 : propellers of diameter between 0,80 and 2,50 M inclusive.

ISO 7379-1983

内六角圆柱头轴肩螺钉

Hexagon socket head shoulder screws

适用范围：Lays down the specification for products with metric dimensions and nominal shoulder diameters form 6,5 mm up to and including 25 mm; gives geometrical tolerances; includes specifications with referenc...

发布日期：1983-10-01  实施日期：1983-10-01

DIN 34814-1999

塑料六角螺母

Plastic hexagon nuts

适用范围：The document contains dimensional and performance requirements of plastic hexagon nuts and specifies their designation.

DIN 856-2-1990

半圆成型凸铣刀 交货技术条件

Convex milling cutters; technical delivery conditions

适用范围：The information on designation, dimensions, tolerances, material, design and marking included in the standard conditions apply to convex milling cutters according to DIN 856 part 1.

ISO 8062-3 CORR 1-2009

Geometrical product specifications (gps). Dimensional and geometrical tolerances for moulded parts. Part 3:General dimensional and geometrical tolerances and machining allowances for castings technical corrigendum 1 first edition

实施日期：2009-01-15

BS EN ISO 8062-1-2007

Geometrische Produktspezifikationen (GPS). Ma ,Form-und Lagetoleranzen für Formteile. Begriffe Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Part 1:Vocabulary Spécification géométrique des produits (GPS). Tolérances dimensionnelles et géométriques des pièces moulées. Vocabulaire

实施日期：2007-10-31

BS 4656-2-1988

机床精度和试验方法.第2部分:仿形车床和仿形附件规范

Genauigkeit von Werkzeugmaschinen und Pruefverfahren. Kopierdrehmaschinen und Kopiervorrichtungen Accuracy of Machine Tools and Methods of Test Part 2:Copying Lathes and Copying Attachments Precision d...

适用范围：Accuracy requirements and geometrical and practical tests with reference to BS 3800.

实施日期：1988-01-01

DIN 885-2-1990

三面刃铣刀 交货技术条件

Side milling cutters; technical delivery conditions

适用范围：The information on designation, dimensions, tolerances, material, design and marking included in the standard conditions apply to side milling cutters according to DIN 885 part 1.

DIN EN ISO 14744-6-2000

焊接.电子束焊机.第6部分:点位稳定性测量

Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000); German version EN ISO 14744-6:2000

适用范围：For the acceptance test of electron beam welding the test of the welding point position tolerances is specified. The welding point position tolerance is a variable which is, above all, important for lo...

GB 1184-1980

形状和位置公差 未注公差的规定

Tolerances of form and of position--Tolerance

适用范围：本标准适用于图样上未注形状和位置公差的机械加工零件。

实施日期：1981-07-01

DIN 31699-1986

滑动轴承 轴、轴环、止推环的形状和位置偏差和表面粗糙度

Plain bearings; shafts, collars, thrust collars; geometrical tolerances and surface roughness

适用范围：This standard specifies the tolerances of form and position and the surface roughness of shafts, flanges and thrust collers for plain bearing units. It applies to thrust or journal plain bearing units ...