BS EN 50363-4-2-2005

Insulating, sheathing and covering materials for low voltage energy cables. PVC covering compounds

实施日期：2006-02-03

IEC 60068-3-2-1976

基本环境试验规程 第3-2部分:背景资料 第2节:温度/低气压组合试验

Basic environmental testing procedures - Part 3-2: Background information - Combined temperature/low air pressure tests

适用范围：Gives background information for Test Z/AM: Combined cold/low air pressure tests (IEC 68-2-40), and Test Z/BM: Combined dry heat/low air pressure tests (IEC 68-2-41).

发布日期：1976-01-01  实施日期：1976-01-01

DIN 18190-4-1992

建筑物密封卷材;概念,标志.要求

Waterproof sheeting for the waterproofing of buildings; waterproof sheeting with inlay of metal foil; definition, designation, requirements

适用范围：The document applies to sheeting which is made of an inlay of metal foil and covering layers of bitumen and which is used for the water-proofing of buildings.

BS EN 996-1995+A3-2009

Piling equipment. Safety requirements

实施日期：1996-08-15

NF P75-445-1-2013

Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) products - Part 1 : specification for the rigid foam dispensed s

BS EN 3475-406-2002

飞行器用电缆 试验方法 第406部分:冷弯试验

Luft-und Raumfahrt. Elektrische Leitungen fuer Luftfahrt,Verwendung. Pruefverfahren. Wickeln bei Kaelte Cables,Electrical,Aircraft Use-Test Methods-Part 406:Cold Bend test Serie aerospatiale. Cables el...

适用范围：To be read in conjunction with EN 3475-100

实施日期：2002-02-05

GB/T 12584-2001

橡胶或塑料涂覆织物 低温冲击试验

Rubber or plastics coated fabrics-Low-temperature impact test

实施日期：2002-05-01

NF C20-401-1999

Environment testing. Part 3 : background information. Section 1 : cold and dry heat tests.

NF E86-512-1-2009

Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1 : safety valves for cryogenic service.

EN 14320-1-2013

建筑设备与工业装置用隔热产品 就地形成喷涂硬质聚氨酯(PUR)和聚异氰脲酯(PIR)泡沫产品 第1部分:安装前的硬质泡沫喷射系统的规范

Thermal insulating products for building equipment and industrial installations. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products. Part 1:Specification for the r...

实施日期：2013-01-01

EN 60068-2-39-1999

环境试验.第2部分:试验.试验Z/修改件:混合连续冷却,低气压和湿热试验

Environmental Testing - Part 2: Tests - Test Z/AMD: Combined Sequential Cold, Low Air Pressure and Damp Heat Test [Superseded: CENELEC HD 323.2.39 S1]

发布日期：1999-04-01  实施日期：1999-04-01

GB/T 12584-2008

橡胶或塑料涂覆织物 低温冲击试验

Rubber or plastics coated fabrics - Low-temperature impact test

适用范围：本标准规定了测定橡胶或塑料涂覆织物在承受规定的冲击条件时未出现断裂或涂覆层龟裂的最低温度的方法。　橡胶或塑料涂覆织物应用于许多有冲击或无冲击的低温弯曲的制品中。本方法获得的数据可以用于预测这些涂覆织物仅在...

发布日期：2008-05-14  实施日期：2008-10-01

BS EN 61065-1993

老化后矿物绝缘油低温流动特性的评估方法

Verfahren zur Pruefung der Kaeltefliesseigenschaften von Isolieroelen auf Mineraloelbasis nach vorhergehelnder Alterung Method for Evaluating the Low Temperature Flow Properties of Mineral Insulating O...

适用范围：Describes method for assessing the changes in activity of pour point depressant additives.

实施日期：1993-01-01

FZ/T 01007-2008

涂层织物 耐低温性的测定

Coated fabrics-Determination of resistance to low temperature

适用范围：本标准规定了涂层织物耐低温性能的方法，包括低温冲击试验和极限脆化温度的测定。本标准适用于在室温下试样能弯曲成试验状态而不损伤的涂层织物。本标准提供两种不同参数的试验(参数A和参数B)，试验结果之间不具备可比性，...

实施日期：2008-10-01

BS EN 60512-11-10-2002

电子设备连接器 试验和测量 第11-10部分:气候试验 试验11j:低温

Steckverbinder fuer elektronische Einrichtungen. Mess-und Pruefverfahren. Klimatische Pruefungen. Pruefung 11j. Kaelte Connectors for Electronic Equipment-Tests and Measurements-Part 11-10:Climatic Tes...

适用范围：This part of IEC 60512, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for simila...

实施日期：2002-05-27

GB/T 2423.1-2001

电工电子产品环境试验 第2部分：试验方法试验A：低温

Environmental testing for electric and electronic products--Part 2:Test methods--Tests A:Cold

实施日期：2002-02-01

ISO 21028-2-2004

低温容器 材料在低温下的粗糙度要求 第2部分: -80℃和-20℃之间的温度

Cryogenic vessels toughness requirements for materials at cryogenic temperature. Part 2:Temperatures between. 80 °c and. 20 °c first edition

适用范围：This part of ISO 21028 specifies the toughness requirements of metallic materials for use at temperatures between − 20 °C and − 80 °C to ensure their suitability for cryogenic vessels. It is applicable...

实施日期：2004-04-15

NF E86-503-1-2004

Cryogenic vessels - Static non-vacuum insulated vessels - Part 1 : fundamental requirements.

EN 13371-2001

Cryogenic Vessels. Couplings for Cryogenic Service

实施日期：2001-12-01

NF P75-442-1-2005

Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: specification for bonded and loose-fill products before installation.