BS 5733-2010

Allgemeine Anforderungen fuer Elektrozubehoer General requirements for electrical accessories. Specification Specification des prescriptions generales des accessoires electriques.

实施日期：2010-07-31

GB/T 10237-1988

电力变压器 绝缘水平和绝缘试验外绝缘的空气间隙

Power transformers--Insulation levels and dielectric tests external clearances in air

BS 5126-1-1993

1100V以下系统用矿山型阻燃式电源和控制装置.第1部分:直接起动器规范 迷谌嘟涣鞯缏飞*)

Druckfest gekapselte Versorgungs und Regeleinheiten fuer Netze bis 1100 V im Grubenbau. Direkte Motoranlasser Mining Type Flameproof Supply and Control Units for Use on Systems up to 1100 V Part 1:Spec...

适用范围：Specifies service conditions, rated values, design and construction, verification and testing.

实施日期：1993-01-01

BS EN 60664-5-2007

低压系统内设备的绝缘配合.等于或低于2mm的余隙距离和漏电距离的综合测定法

Isolationskoordination für elektrische Betriebsmittel in Niederspannungsanlagen. Ein umfassendes Verfahren zur Bemessung der Luft-und Kriechstrecken für Abst?nde gleich oder unter 2 mm Insulation coord...

适用范围：This part of IEC 60664 specifies the dimensioning of clearances and creepage distances forspacings equal to or less than 2 mm for printed wiring board and equivalent constructions,where the clearance a...

实施日期：2007-12-31

BS 5067-1985

矿山用防火变压器规范

Explosionsgeschuezte Transformatoren fuer den Bergbau Specification for Flameproof transformers for use in mines Transformateurs antideflagrants destines. etre utilises dans les mines-specifications

适用范围：Covers dry-type flameproof three-phase power transformers up to 11 kV for use underground in mines. States voltages, ratings and connections; mounting flanges and cable terminations; over-voltage prote...

实施日期：1985-07-31

BS 2769-1-1984

手持电动工具.第1部分:一般要求规范

Handgefuehrte Elektrowerkzeuge. Allgemeine Anforderungen Hand-Held Electric Motor-Operated Tools Part 1:Specification for General Requirements Outillage electrique portatif-specifications. Caracteristi...

适用范围：General requirements and conditions of test applicable to these tools. Requirements specific to particular tools are additionally specified in a related Part.

实施日期：1984-01-01

BS 7354-1990

高压敞开式出线站设计实用规程

Code of Practice for Design of High-Voltage Open-Terminal Stations

适用范围：1 General This British Standard gives recommendations for the design of high-voltage open-terminal stations. This standard does not cover equipment included in installations for which separate standar...

实施日期：1990-01-01

BS ISO 1132-1-2000

滚动轴承.公差.术语和定义

Waelzlager. Toleranzen. Begriffe Rolling Bearings-Tolerances-Part 1:Terms and Definitions Roulements. Tolerances. Termes et definitions Supersedes BS 6107:Part 1:1981;

适用范围：This part of ISO 1132 defines terms used in International Standards specifying tolerances for boundary dimensions, geometrical accuracy, running accuracy and internal clearance for rolling bearings. In...

实施日期：2000-12-15

BS 5126-2-1993

1100V以下系统用矿山型阻燃式电源和控制装置.第2部分:断路器装置规范

Druckfest gekapselte Versorgungs und Regeleinheiten fuer Netze bis 1100 V im Grubenbau. Leistungsschaltereinheiten Mining Type Flameproof Supply and Control Units for Use on Systems up to 1100 V Part 2...

适用范围：Specifies service conditions, rated values, design and construction, verification and testing.

实施日期：1993-01-01

BS 6435-1984

变压器与整流圈的高压电缆的干燥端子防潮用未充填护套规范

Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors

适用范围：Requirements for unfilled enclosures in which cores of cables terminate within the enclosures and are connected to terminals therein. The enclosures are intended for the termination of impregnated pape...

实施日期：1984-01-31

BS ISO 6787-2001

螺丝和螺母的装配工具 可调整扳手 替代BS 6333:1995

Schraubwerkzeuge. Verstellbare Einmaulschluessel Assembly Tools for Screws and Nuts-Adjustable Wrenches Outils de manoeuvre pour vis et ecrous. Cles a molette Supersedes BS 6333:1995;

适用范围：This International Standard specifies the dimensions of adjustable wrenches and the admissible clearance of the adjustable jaw. It also specifies test conditions to test the suitability of tool perform...

实施日期：2001-06-15

BS 2501-1992

商业用封闭式冷冻贮舱规范

Specification for commercial refrigerated storage cabinets of the closed reach-in type

适用范围：Constructional requirements, methods of calculating internal volumes and shelf areas, methods of testing and determining performance. Covers internal temperature range of -30<deg>C to +10<deg>C.

BS EN 60127-6-1994

小型熔断器.小型管状熔断片用熔断器支持件

Miniature Fuses Part 6:Fuse-Holders for Miniature Cartridge Fuse-Links (IEC 127-6:1994) (E)

适用范围：Gives applicable fuse-holders for miniature cartridge fuse-links according to BS EN 60127-2 and sub-miniature fuse-links according to BS EN 60127-3 for the protection of electric appliances, electronic...

实施日期：1994-01-01

BS EN ISO 7785-1-1999

手持式牙科器械.高速空气涡轮钻头

Zahnaerztliche Handstuecke. Schnellaufende luftbetriebene Turbinen-Handstuecke Dental Handpieces-Part 1:High-Speed Air Turbine Handpieces Pieces a main dentaires. Pieces a main a turbines a air comprim...

适用范围：Dental handpieces, Dental instruments, Dental equipment, Dentistry, Air, Turbines, Velocity, Performance, Classification systems, Design, Shape, Dimensions, Chucks, Accessories, Rotating parts, Test eq...

实施日期：1999-10-15

BS 2562-1979

变压器与电抗器用电缆箱规范

Spezifikation fuer Kabelkasten fuer Transformatoren und Drosselen Cable Boxes for Transformers and Reactors Spécification des bo?tes de c?bles pour transformateurs et inductances

适用范围：Specifies envelope and fixing dimensions and dimensions of certain components. For voltages up to 36 kV and currents up to 2500 A. Requirements for boxes in which the cores of cables terminate and are ...

实施日期：1979-12-31

BS 6972-1988

家用、轻工业及商用的照明器支承耦合器的一般要求规范

General Requirements for Luminaire Supporting Couplers for Domestic,Light Industrial and Commercial Use

适用范围：Requirements for luminaire supporting couplers (LSCs) comprising LSC plugs and LSC outlets for use in final circuits rated at not more than 16 A and not more than 250 V a.c., the electrical load connec...

实施日期：1988-01-01

BS EN 175200-1997

电子元器件质量评定协调体系.分规范:圆连接器

Rahmenspezifikation. Rundsteckverbinder Harmonized System of Quality Assessment for Electronic Components Sectional Specification:Circular Connectors Specification intermediaire. Connecteurs cylindriqu...

适用范围：This Sectional Specification is applicable to circular connectors for use in electrical and electronic equipment and systems. It shall be used in conjunction with the basic specification, IEC 512: Elec...

实施日期：1997-04-15

BS 7657-2010

建筑物供电电源的最大额定电流100A的辅助接线板和连接元件及熔断器(断电)规范

Specification for cut-out assemblies up to 100 A rating,for power supply to buildings

适用范围：This standard specifies the requirements for cut‑out assembliesup to 100 A rating, for power supply to buildings. Each cut‑outassembly provides a means of terminating service cables, fuseprotection, a ...

实施日期：2010-02-28

BS 5126-4-1993

1100V以下系统用矿山型阻燃式电源和控制装置.第4部分:钻机供电装置的空冷变压器规范

Druckfest gekapselte Versorgungs und Regeleinheiten fuer Netze bis 1100 V im Grubenbau. Luftgekuehlte Transformatoren fuer Bohrmaschinen Mining Type Flameproof Supply and Control Units for Use on Syste...

适用范围：Specifies service conditions, rated values, design and construction, verification and testing.

实施日期：1993-01-01

BS EN 60838-2-1-1997

各式灯座.特殊要求.S14灯座

Sonderfassungen. Besondere Anforderungen. Lampenfassungen S14 Miscellaneous Lampholders Part 2-1:Particular Requirements Section-Lampholders S14 Douilles diverses pour lampes. Règles particulières. Dou...

适用范围：This section of IEC 838-2 applies to lampholders S14 intended for building-in as well as for independent lampholders for use with linear incandescent lamps for general lighting service (GLS). Independe...

实施日期：1997-03-15