NF P18-962-2-2005

Products and systems for the protection and repair of concrete structures - Test methods - Part 2 : determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength.

DIN VDE 0100-444-2010

低压电气装置 第4-44部分:安全防护 电压骚扰和电磁骚扰的防护

Low-voltage electrical installations. Part 4-444:Protection for safety. Protection against voltage disturbances and electromagnetic disturbances

EN 1771-2004

Products and systems for the protection and repair of concrete structures Test methods Determination of injectability and splitting test

实施日期：2004-08-01

EN 12618-1-2003

Products and systems for the protection and repair of concrete structures. Test methods. Part 1:Adhesion and elongation capacity of injection products with limited ductility

实施日期：2003-07-01

EN 14994-2007

Gas explosion venting protective systems

实施日期：2007-02-01

JB/T 11649-2013

粉煤灰分选系统

Separation system for fly ash

适用范围：本标准规定了粉煤灰分选系统的分类、技术要求、与技术要求相对应的试验方法、校验规则、标志、包装、运输要求。本标准适用于一、二级粉煤灰的负压分选系统。

发布日期：2013-10-17  实施日期：2014-03-01

DIN EN 1799-1999

混凝土结构的保护和修理的产品和系统.试验方法.混凝土表面应用的结构性粘结剂适用性的测量试验

Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface; German vers...

适用范围：The document dspcifies methods of testing to measure the suitability of structural bonding agents for application to vertical and horizontal surfaces.

IEC 62305-4-2010

雷电防护 第4部分:建筑物内的电气和电子系统

Protection against lightning - Part 4: Electrical and electronic systems within structures

适用范围：IEC 62305-4:2010 provides information for the design, installation, inspection, maintenance and testing of electrical and electronic system protection (SPM) to reduce the risk of permanent failures due...

发布日期：2010-12-09  实施日期：2010-12-09

BS EN 1504-10-2003

混凝土结构的防护和维修用产品和系统 定义,质量控制要求和符合性评价 第10部分:产品和系统的场所应用和质量控制

Products and systems for the protection and repair of concrete structures. Definitions. Requirements. Quality control and evaluation of conformity. Site application of products and systems and quality ...

适用范围：This part of EN 1504 gives requirements for substrate condition before and during application including structural stability, storage, the preparation and application of products and systems for the pr...

实施日期：2004-01-15

EN 50152-3-2-2001

Railway Applications - Fixed Installations - Particular Requirements for A.C. Switchgear - Part 3-2: Measurement, Control and Protection Devices for Specific Use in A.C. Traction Systems - Single-Phase Current Transformers

BS EN 14629-2007

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken. Prüfverfahren. Bestimmung des Chloridgehaltes von Festbeton Products and systems for the protection and repair of concrete structures. Test methods. Determination of chloride content in hardened concrete Produits et systèmes pour la protection et la réparation des structures en béton. Méthodes d'essais. Mesurage du taux de chlorure d'un béton durci

实施日期：2007-04-30

DIN EN ISO 14713-1-2010

锌镀层 结构中铁和钢的防腐蚀指南与建议 第1部分:设计和抗腐蚀的一般原则

Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance

适用范围：This part of ISO 14713 provides guidelines and recommendations regarding the general principles of design which are appropriate for articles to be zinc coated for corrosion protection and the level of ...

实施日期：2010-05-01

IEC 60947-8 AMD 2-2011

AMENDMENT 2 Low-voltage switchgear and controlgear. Part 8:Control units for built-in thermal protection (PTC) for rotating electrical machines AMENDEMENT 2 Appareillage. basse tension. Partie 8:Unités de commande pour la protection thermique incorporée (

实施日期：2011-05-01

DIN EN 12637-3-2004

保护和修补混凝土结构的制品和系统 试验方法 浇注产品的相容性 第3部分:混凝土中塑料浇注材料的作用

Products and systems for the protection and repair of concrete structures - Test methods; Compatibility of injection products - Part 3: Effect of injection products on elastomers

适用范围：This part of this European Standard describes a test method to determine the ability of polymeric insert in concrete to withstand the effect of hardening and hardened injection products.

NF P18-978-2003

Products and systems for the protection and repair of concrete structures - Test method - Determination of thixotropy of products for protection of reinforcement.

IEC 60709-2004

核电厂 对安全重要的测试设备和控制系统 隔离

Nuclear power plants. Instrumentation and control systems important to safety. Separation Centrales nucléaires de puissance. Systèmes d'instrumentation et de contr?le commande importants pour la s?ret?...

适用范围：Defines the technical requirements to be met for Isystems important to safety and their cables, in order to achieve adequate physical separation between redundant sections of a system and between a sys...

发布日期：2004-11-02  实施日期：2004-11-01

NF P18-983-2007

Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete.

BS EN 1504-4-2004

Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Structural bonding

BS EN 1544-2006

Produkte und Systeme fuer den Schutz und die Instandsetzung von Betontragwerken. Pruefverfahren. Bestimmung des Kriechverhaltens von fuer die Verankerung von Bewehrungsstaeben verwendeten Kunstharzprodukten (PC) bei Dauerzuglast Products and systems for the protection and repair of concrete structures Test methods Determination of creep under sustained tensile load for synthetic resin products (PC) for anchoring of reinforcing bars Produits et systemes pour la protection et la reparation des str

实施日期：2006-11-30

DIN V VDE V 0185-600-2008

Protection against lightning - Part 600: Testing of the suitability of coated metallic roofs as a natural components of the lightning protection system

实施日期：2008-01-01