BS EN 12457-1-2002

废弃物特性 浸析 颗粒废弃物和污泥浸析的一致性试验 第1部分:高固体含量和粒径小于4mm的材料在液体、固体比为2 l/kg时的一级分批试验

Charakterisierung von Abfaellen. Auslaugung. Uebereinstimmungsuntersuchung fuer die Auslaugung von koernigen Abfaellen und Schlaemmen. Einstufiges Schuettelverfahren mit einem Fluessigkeits-/Feststoffv...

适用范围：This part of four European Standards specifies a compliance test providing information on leaching of granularwastes and sludges under the experimental conditions specified hereafter, and particularly ...

实施日期：2002-10-15

CNS 5815-1980

粒状碳黑之倾注密度测定法

Method of Test for Poor Density of Pelleted Carbon Black

发布日期：1980-07-09  实施日期：1980-07-09

ISO 8082-1-2009

林业用自行式机械 倾翻保护结构的实验室试验和性能要求 第1部分:一般机械

Self-propelled machinery for forestry -- Laboratory tests and performance requirements for roll-over protective structures -- Part 1: General machines

适用范围：ISO 8082-1:2009 establishes a consistent, reproducible means of evaluating the force–deflection characteristics of roll-over protective structures (ROPS) on self-propelled forestry machines under stati...

发布日期：2009-08-01  实施日期：2009-08-01

BS 3300-1985

家用无烟囱煤油对流式加热器与烹调器规范

Specification for paraffin unflued space heating and cooking appliances for domestic use

适用范围：Construction, performance and safety requirements for appliances , with and without pressure burners, using Class C1 burner fuel to BS 2869, and associated methods of test.

实施日期：1985-02-28

EN 12457-3-2002

Characterisation of waste Leaching Compliance test for leaching of granular waste materials and sludges Part 3:Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with a high solid content and with a particle size below 4

实施日期：2002-09-01

DIN EN 12457-2-2003

废弃物特性 沥滤 颗粒状废弃材料和污泥物沥滤的合格性试验 第2部分:粒度小于4 mm(粒度减小或不减少)的材料液固比为10 l/kg条件下的单级批量试验

Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for material with partic...

适用范围：This part of the European Standard specifies a compliance test providing information on leaching of granular wastes and sludges under the experimental conditions specified hereafter, and particularly a...

NF X30-402-3-2002

Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3 : two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below

BS ISO 8082-1-2009

Self-propelled machinery for forestry. Laboratory tests and performance requirements for roll-over protective structures Part 1:General machines Machines forestières automotrices. Essais de laboratoire et exigences de performance pour les structures de protection au retournement. Machines communes

实施日期：2009-09-30

EN 22876-1992

Packaging. Complete,Filled Transport Packages. Rolling Test (ISO 2876 :1985)

实施日期：1992-01-01

JIS K7199-1999

塑料－用毛细流变计和狭小流变计测定塑料的流动性

Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers

适用范围：この規格は，プラスチック成形加工時の条件に近い速度や温度においで，せん断応力の影響を受ける溶融プラスチックの流れ特性の試験方法を規定する。…

EN 12457-1-2002

Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 1:One stage batch test at a liquid to solid ratio of 2 1/kg for materials with high solid content and with particle size below 4 mm (without or

实施日期：2002-09-01

EN ISO 5267-1-2000

Pulps. Determination of drainability. Part 1:Schopper-Riegler method Incorporating Corrigendum July 2002;ISO 5267-1:1999

实施日期：2000-07-01

JIS K2239-1993

轴承油

Bearing oils

适用范围：この規格は，主として循環式，油浴式，はねかけ式給油方法による各種機械の軸受部の潤滑油として用いる軸受油について規定する。

EN 15169-2007

Characterization of waste. Determination of loss on ignition in waste,sludge and sediments

实施日期：2007-02-01

NF M07-153-2013

Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method

NF E58-057-2008

土方机械 翻车和物体降落保护结构的实验室研究 体积变形限制规范

Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume.

DIN EN 12457-3-2003

废弃物特性 沥滤 颗粒状废弃材料和污泥物沥滤的合格性试验 第3部分:高固体含量和粒度小于4 mm(粒度减小或不减少)的材料中液固比为2 l/kg和10 l/kg条件下的单级批量试验

Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg with particle ...

EN 14039-2004

Characterization of waste. Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography

实施日期：2004-09-01

GB/T 21592-2008

危险品 中型散装容器（IBCs)倾覆试验方法

Dangerous goods - Topple test method for intermediate bulk containers (IBCs)

适用范围：本标准规定了柔性危险品中型散装容器倾覆试验的试验设备、试样数量、试样准备、试验步骤及试验报告。　　本标准适用于柔性危险品中型散装容器的倾覆试验。

发布日期：2008-04-01  实施日期：2008-09-01

NF P18-980-2005

Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products.