IEC 60825-2 INT 1-2008

激光产品的安全 第2部分:光纤通信系统(OFCS)的安全

Safety of laser products. Part 2:Safety of optical fibre communication systems (OFCS)

适用范围：This standard is Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS); Interpretation Sheet 1.

实施日期：2008-04-01

EN 61280-2-2-2008

Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement

IEC 61754-29-2012

光纤连接器和无源器件 光纤连接器接口 第29部分:BLINK型连接器系列

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 29: Type BLINK connector series

适用范围：IEC 61754-29:2012 defines the standard interface dimensions for the type BLINK series of connectors.

发布日期：2012-04-19  实施日期：2012-04-19

BS EN 60794-2-50-2008

Lichtwellenleiterkabel. LWL-Innenkabel. Familienspezifikation für Simplex-und Duplexkabel für den Einsatz als Patchkabel Optical fibre cables. Part 2-50:Indoor cables. Family specification for simplex and duplex cables for use in terminated cable assemblies C?bles. fibres optiques. C?bles intérieurs.Spécification de famille pour les c?bles simplex et duplex utilisés dans les ensembles de c?bles équipés

实施日期：2008-08-29

BS DD IEC/TS 62538-2009

Kategorisierung optischer Bauteile Categorization of optical devices

实施日期：2009-01-31

NF L54-002-223-2008

Aerospace series - Elements of electrical and optical connection - Test methods - Part 223 : measurement of characteristic impedance of a coaxial connector or contact.

EN 61280-2-11-2006

Fibre optic communication subsystem test procedures Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring

DIN EN 61269-1-1997

纤维光学端接设备.第1部分:总规范

Fibre optic terminus sets - Part 1: Generic specification (IEC 61269-1:1994); German version EN 61269-1:1997

适用范围：The document applies to fibre optic terminus sets for all types, sizes and structures of fibres and cables. It includes terminus set requirements and quality assessment procedures.#,,#

EN 60794-2-40-2008

Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables

IEC 61280-2-9-2009

纤维光学通信子系统试验程序 第2-9部分:数字系统 密集波分复合系统的光学信噪比的测量

Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems

适用范围：IEC 61280-2-9:2009 provides a parameter definition and a test method for obtaining optical signal-to-noise ratio (OSNR) using apparatus that measures the optical spectrum at a multichannel interface. B...

发布日期：2009-02-11  实施日期：2009-02-11

NF C93-829-1-1-2007

Fibre optic fan-outs - Part 1-1 : blank detail specification.

IEC 61745-1998

光纤几何参数测试装置校准用端面影像分析程序

End-Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets Procedure D′Analyse D′Image D′Extremite Pour L′Etalonnage De Dispositifs D′Essais De Geometrie Des Fibres Optiq...

发布日期：1998-08-25  实施日期：1998-08-25

EN 61300-3-2-2009

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device [Superseded: CENELEC EN 61300-3-12]

IEC 60869-1-1999

纤维光学衰减器 第1部分:总规范

Fibre Optic Attenuators. Part 1:Generic Specification Attenuateurs A Fibres Optiques. Partie 1:Specification Generique Third Edition;IECQ QC 800000

适用范围：This part of IEC 60869 applies to fibre optic attenuators. These have all of the following general features: - they are passive in that they contain no opto-electronic or other transducing elements; -...

实施日期：1999-11-01

EN 3745-703-2005

Aerospace series. Fibres and cables,optical,aircraft use. Test methods. Part 703:Durability of manufacturer's marking

实施日期：2005-11-01

BS EN 61300-2-49-2007

Lichtwellenleiter. Verbindungselemente und passive Bauteile. Grundlegende Prüf-und Messverfahren. Prüfungen. Einbauprüfung für Steckverbinder Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-49:Tests. Connector installation test Dispositifs d'interconnexion et composants passifs. fibres optiques. Méthodes fondamentales d'essais et de mesures. Essais. Essai d'installation de connecteur

实施日期：2007-08-31

NF C93-540-2-23-2002

Communication cables - Part 2-23 : common design rules and construction - PE insulation.

IEC 60811-512-2012

电缆和光缆 非金属材料的试验方法 第512部分:机械性能试验 聚乙烯和聚丙烯化合物专用方法 在高温条件下的拉伸强度和断裂伸长率

Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation...

适用范围：IEC 60811-512:2012 describes the procedure for testing tensile strength and elongation at break after conditioning at elevated temperature. It is specific to polyethylene and polypropylene compounds. T...

发布日期：2012-03-13  实施日期：2012-03-13

NF C93-807-2-2-2008

Fibre optic communication subsystem test procedures - Part 2-2 : digital systems - Optical eye pattern, waveform and extinction ratio measurement.

IEC 61300-3-23-1998

纤维光学互连器件和无源器件 基本试验和测量程序 第3-23部分:检查和测量 光纤与套管端面间的相对位置

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements - Fibre position relative to ferrule endface

适用范围：IEC 61300-3-23:1998 is to measure the fibre position relative to the ferrule endface of a spherically polished ferrule, that is a fibre undercut or a fibre protrusion.

发布日期：1998-04-29  实施日期：1998-04-29