BS EN ISO 8673-2001

带有米制精密齿节螺纹的1型六角螺母 产品等级A和B 替代BS EN 28673:1992

Sechskantmuttern,Typ 1,mit metrischem Feingewinde. Produktklassen A und B Hexagon Nuts,Style 1,with Metric Fine Pitch Thread-Product Grades A and B Ecrous hexagonaux,style 1,a filetage metrique a pas f...

适用范围：This International Standard specifies the characteristics of hexagon nuts, style 1, with metric fine pitch thread, with nominal thread diameters d from 8 mm up to and including 64 mm, with product grad...

实施日期：2001-02-15

NF L24-055-2010

Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated.

GB/T 24425.5-2009

钢丝螺套用内螺纹

Internal thread for wire thread inserts

适用范围：GB/T 24425的本部分规定了螺纹公称直径为2mm～39mm、螺距为0.4mm～4mm的安装钢丝螺套用内螺纹的基本尺寸与公差。钢丝螺套旋入本部分规定的内螺纹后，所形成内螺纹的中径公差带是由钢丝螺套用内螺纹中径公差带和钢丝螺套型面...

发布日期：2009-10-15  实施日期：2010-03-01

BS A 358-2-2000

MJ-Gewinde. Grenzmasse fuer Schrauben und Muttern MJ Threads-Part 2:Limit Dimensions for Bolts and Nuts Filetage MJ. Dimensions limites pour vis et ecrous Supersedes BS 6293-2:1994

实施日期：2000-01-15

BS EN ISO 4032-2001

1型六角螺帽 产品等级A和B 替代BS EN 24032:1992

Sechskantmuttern,Typ 1. Produktklassen A und B Hexagon Nuts,Style 1-Product Grades A and B Ecrous hexagonaux,style 1. Grades A et B Supersedes BS EN 24032:1992;

适用范围：This International Standard specifies the characteristics of hexagon nuts, style 1, with threads from M1.6 up to including M64, with product grade A for threads d ≤M16 and product grade B for threads d...

实施日期：2001-06-15

BS A 338-1999

Annietmuttern,selbstsichernd,nicht beweglich,beiderseitiger verkuerzter Flansch,mit zylindrischer Aussenkung,mit MJ-Gewinde,Klassen:1100 MPa (bei Raumtemperatur)/235°C,1100 MPa (bei Raumtemperatur)/315°C und 1100 MPa (bei Raumtemperatur)/425°C. Masse Nuts,Anchor,Self-Locking,Fixed,Two Lug,Reduced Series,with Counterbore,with MJ Threads,Classifications:1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius,1 100 MPa (at Ambient Temperature) / 315 Degrees Celsius and 1 100 MPa (at Ambient Temper

实施日期：1999-02-15

GB/T 802.1-2008

组合式盖形螺母

Acorn nuts - Assembling type

适用范围：GB/T 802的本部分规定了螺纹规格为M4～M24、性能等级为6、8、A2-50、A2-70、A4-50、A4-70、CU2、CU3和AL4级、产品等级为A和B级的组合式盖形螺母。A级用于D≤16mm；B级用于D＞16mm的螺母。

发布日期：2008-08-25  实施日期：2009-02-01

DIN EN 4622-2010

Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated; German and English version EN 4622:2010

实施日期：2010-10-01

BS EN ISO 7042-1998

2型常用扭矩全金属六角螺母.性能类别5、8、10和12

Prevailing torque type all-metal hexagon nuts. Property classes 5, 8, 10 and 12

适用范围：This International Standard specifies the characteristics of prevailing torque type all-metal hexagon nuts, style 2, with threads from M5 up to and including M36, in product grade A for threads up to a...

BS 4A 100-2003

Aerospace series. Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1 249 MPa AMD 17434:September 28,2007

实施日期：2003-11-13

BS 2A 29-1962

Specification for aluminium alloy hexagonal nuts (B.A and B.S.F. threads) (ordinary and slotted) for aircraft

DIN 65451-2003

航空和宇航 带MJ螺钉的螺纹件 螺钉锁紧,耐蚀钢制,等级:900MPa/1100MPa/235℃

Aerospace; thread inserts with MJ thread, locked, screw-locking, steel; class: 900 MPa/1100 MPa/235 <Grad>C

适用范围：This standard specifies the characteristics of thread inserts, with MJ thread, locked, screw-locking, steel used together with screws and bolts of 900 MPa and 1100 MPa nominal tensile strength for temp...

BS A 330-1999

Luft-und Raumfahrt. Annietmuttern,selbstsichernd,beweglich,beiderseitiger Flansch mit zylindrischer Aussenkung,MJ-Gewinde. Klasse. 900 MPa (bei Raumtemperatur)/235°C,900 MPa (bei Raumtemperatur)/315°C und 900 MPa (bei Raumtemperatur)/425°C. Masse Nuts,Anchor,Self-Locking,Floating,Two Lug,with Incremental Counterbore,with MJ Threads,Classifications:900MPa (at Ambient Temperature)/235 Degrees Celsius,900 MPa (at Ambient Temperature)/315 Degrees Celsius and 900 MPa (at Ambient Temperature)/425 Degr

实施日期：1999-04-15

DIN EN ISO 8735-1998

淬硬钢和马氏体不锈钢内螺纹圆柱销

Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997

适用范围：The document contains dimensional and technical requirements of parallel pins with internal thread and specifies their designations.

BS EN 28839-1992

紧固件机械性能.有色金属制螺栓、螺钉、螺柱和螺母

Mechanische Eigenschaften von Verbindungselementen. Schrauben und Muttern aus Nichteisenmetallen Mechanical Properties of Fasteners-Bolts,Screws,Studs and Nuts Made of Non-Ferrous Metals (ISO 8839:1986...

适用范围：This International Standard specifies the mechanical properties of bolts, screws, studs and nuts — with nominal thread diameters, d, from M1,6 to M39 inclusive; — with metric ISO thread in accordan...

实施日期：1992-01-01

BS EN 2943-1998

自锁紧螺旋盘绕插件.技术规范

Draht-Gewindeeinsaetze,selbstsichemd. Technische Lieferbedingungen Inserts,Screw Thread,Helical Coil,Self-Locking-Technical Specification Filets rapportes,a freinage inteme. Specification technique

适用范围：This standard specifies the characteristics, qualification and acceptance requirements for self-locking helical coil screw thread inserts in NI-PH2801 or FE-PA3004, with or without surface coating. It ...

实施日期：1998-11-15

BS AU 50-2.3-1994

Tyres and wheels. Wheels and rims. Specification for road-wheel nuts, studs and bolts for commercial vehicles

BS EN 3377-1996

耐热钢FE-PA92HT(A286)制自锁六角螺母.等级:1100 MPa(室温)/425℃

Sechskantmuttern,selbstsichernd,aus hochwarmfestem Stahl FE-PA92HT (A286). Klasse:1100 MPa (bei Raumtemperatur)/425°C Nuts,Hexagonal,Self-Locking,in Heat Resisting Steel FE-PA92HT (A286)-Classification...

适用范围：This standard specifies the characteristics of self-locking hexagonal nuts in FE-PA92HT for aerospace applications. Classification : 1 100 MPa <up1)> / 425 ℃ <up2)> note:1) The strength class of t...

实施日期：1996-01-01

DIN 6330-2003

1.5d高的六角螺母

Hexagon nuts with a height of 1.5 <(kursiv)d>

适用范围：Hexagon nuts according to DIN 6330 are used for threaded connections which are frequently tightened and backed off. The spherical surface when used together with a countersink of 120?or a conical seat ...

BS 7842-1996

带有预处理螺纹密封特性的安装在螺纹上的螺栓、螺钉和螺柱

Bolzen,Schrauben und Stifte mit im Gewinde eingelegter Gewindedichtung Bolts,Screws and Studs with Pre-Applied Thread Sealing Feature Incorporated into the Thread (E) Boulons,vis et goujons avec une fo...

适用范围：This British Standard specifies the coatings, dimensions, materials, lubrication and performance requirements for bolts, screws and studs with a pre-applied sealing feature incorporated into the thread...

实施日期：1996-01-01