EN ISO 11721-1-2001

Textiles. Determination of the Resistance of Cellulose-Containing Textiles to Micro-Organisms. Soil Burial Test. Part 1:Assessment of Rot-Retardant Finishing ISO 11721-1:2001

实施日期：2001-01-01

EN 12816-2010

LPG equipment and accessories. Transportable refillable LPG cylinders. Disposal

实施日期：2010-12-01

DIN EN 1442-2008

LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction

实施日期：2008-04-01

DIN EN ISO 9809-1-2010

气瓶 可重复充装的无缝钢气瓶 设计、制造和测试 第1部分:抗拉强度低于1100MPa的淬火和回火钢瓶

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (ISO 9809-1:2010); Ge...

实施日期：2010-10-01

ISO 16031-2-2003

航空液压系统 O形圈,英制系列:内径尺寸和剖面.公差和尺寸识别码 第2部分:非液压系统的标准公差

Aerospace fluid systems -- O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes -- Part 2: Standard tolerances for non-hydraulic systems

适用范围：ISO 16031-2:2003 specifies the inside diameters, cross-sections, tolerances and size identification codes for inch O-rings used in aerospace fluid systems intended for use in non-hydraulic systems. ISO...

发布日期：2003-09-01  实施日期：2003-09-01

ISO 9809-1-2010

气瓶 可重复充装的无缝钢气瓶 设计、制造和测试 第1部分:抗拉强度低于1100MPa的淬火和回火钢瓶

Gas cylinders. Refillable seamless steel gas cylinders. Design,construction and testing. Part 1:Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa

适用范围：This part of ISO 9809 specifies minimum requirements for the material, design, construction and workmanship,manufacturing processes, examination and testing at manufacture of refillable quenched and te...

发布日期：2010-04-15  实施日期：2010-04-15

DIN EN 1439-2008

LPG equipment and accessories - Procedure for checking LPG cylinders before, during and after filling

实施日期：2008-06-01

ISO 4706-1-2008

气瓶 可重复充装的焊接钢瓶 第1部分:试验压力60bar及以下

Gas cylinders - Refillable welded steel cylinders - Part 1:Test pressure 60 bar and below

适用范围：This part of ISO 4706 specifies the minimum requirements concerning material selection, design, constructionand workmanship, procedure and test at manufacture of refillable welded-steel gas cylinders o...

实施日期：2008-04-15

BS EN 1439-2008

Flüssiggas-Ger?te und Ausrüstungsteile. Kontrollverfahren für ortsbewegliche,wiederbefüllbare Flaschen für Flüssiggas (LPG) vor,w?hrend und nach dem Füllen LPG equipment and accessories. Procedure for checking LPG cylinders before,during and after filling Equipements pour GPL et leurs accessoires. Procédure de vérification des bouteilles transportables et rechargeables pour GPL avant,pendant et après le remplissage

实施日期：2008-03-31

BS EN 14427-2004

液化石油气(LPG)用可移动的可再充填式全包装复合气瓶.设计和建造

Ortsbewegliche wiederbefuellbare vollumwickelte Flaschen aus Verbundwerkstoff fuer Fluessiggas (LPG). Gestaltung und Konstruktion Transportable refillable fully wrapped composite cylinders for Liquefie...

适用范围：This European Standard specifies minimum requirements for materials, design, construction, prototype testing and routine manufacturing inspections of fully wrapped composite cylinders with a water capa...

实施日期：2004-07-20

DIN EN ISO 9809-2-2010

气瓶 可重复充装的无缝钢气瓶 设计、制造和测试 第2部分:抗拉强度大于或等于1100MPa的淬火和回火钢瓶

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa (ISO 9...

实施日期：2010-10-01

EN ISO 7866-2012

气瓶 可重复充装的铝合金无缝气瓶 设计、结构和试验

Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design,construction and testing

实施日期：2012-09-01

DIN EN ISO 7866-2013

Gas cylinders – Refillable seamless aluminium alloy gas cylinders – Design, construction and testing (ISO 7866:2012)

发布日期：2013-01-01  实施日期：2013-01-01

BS EN 14893-2006

Fluessiggas-Geraete und Ausruestungsteile. Ortsbewegliche,geschweisste Druckfaesser aus Stahl fuer Fluessiggas (LPG) mit einem Fassungsraum zwischen 150 Liter und 1000 Liter LPG equipment and accessories Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres Equipements pour GPL et leurs accessoires. Futs a pression metalliques transportables pour GPL d'une capacite comprise entre 150 litres et 1000 litres

实施日期：2006-08-31

DIN EN 14894-2013

LPG equipment and accessories – Cylinder and drum marking

发布日期：2013-06-01  实施日期：2013-06-01

BS ISO 16031-1-2008

Luft-und Raumfahrt. Fluidische Systeme. O-Ringe,Inch-Reihe. Innendurchmesser und Querschnitte,Grenzabma?e und Ma?kennzahlen. Enge Toleranzen für Hydraulik-Systeme Aerospace fluid systems. O-rings,inch series:Inside diameters and cross sections,tolerances and size-identification codes. Part 1:Close tolerances for hydraulic systems Systèmes aérospatiaux de fluides. Joints toriques,série en inches. Diamètres intérieurs et sections,tolérances et codes d'identification dimensionnelle. Tolérances serr

实施日期：2008-03-31

ISO 11721-1-2001

纺织品 纤维素纺织品抗菌性的测定 土埋试验 第1部分:防腐处理的评定

Textiles -- Determination of resistance of cellulose-containing textiles to micro-organisms -- Soil burial test -- Part 1: Assessment of rot-retardant finishing

发布日期：2001-01-01  实施日期：2001-01-01

ISO 9809-3-2010

气瓶 可重复充装的无缝钢气瓶 设计、制造和测试 第3部分:标准化钢瓶

Gas cylinders. Refillable seamless steel gas cylinders. Design,construction and testing. Part 3:Normalized steel cylinders

适用范围：This part of ISO 9809 specifies minimum requirements for the material, design, construction and workmanship,manufacturing processes, examination and testing at manufacture of refillable normalized or n...

发布日期：2010-04-15  实施日期：2010-04-15

NF A49-901-3-2011

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3 : normalized steel cylinders.

NF M88-728-2012

LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction.