BS ISO 16232-7-2007

Stra?enfahrzeuge. Sauberkeit von Komponenten für Fluidsysteme. Gr??en-und Anzahlbestimmung von Partikeln durch mikroskopische Analyse Road vehicles. Cleanliness of components of fluid circuits. Part 7:Particle sizing and counting by microscopic analysis Véhicules routiers. Propret des composants des circuits de fluide. Granulométrie et comptage des particules par analyse microscopique

实施日期：2007-06-29

ASTM D1177-2007

含水发动机冷却剂凝固点的试验方法

Standard Test Method for Freezing Point of Aqueous Engine Coolants

适用范围：<p id="s00013">The freezing point of an engine coolant indicates the coolant freeze protection.</p> <p id="s00014">The freezing point of an engine coolant may be used to determine the approximate glyco...

实施日期：2007-04-01

ASTM D7736-2012

测定乙二醇中酸和乙二醇酯的试验方法

Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol

适用范围：<p>The presence of acids or glycol esters in the ethylene glycol used to produce engine coolant is undesirable. Under conditions in an engine cooling system, the esters can hydrolyze to form glycol and...

实施日期：2012-04-01

BS DD IEC/TS 62454-2007

Bauweisen für elektronische Einrichtungen. Konstruktionsleitfaden. Schnittstellenma?e und Ma?nahmen für die Wasserkühlung von elektronischen Einrichtungen in Schr?nken nach den Normenreihen IEC 60297 und IEC 60917 Mechanical structures for electronic equipment. Design guide:Interface dimensions and provisions for water cooling of electronic equipment within cabinets of the IEC 60297 and IEC 60917 series Structures mécaniques pour équipement électronique. Guide de conception. Dimensions d'interfa

实施日期：2007-11-30

ASTM D1177-2012

含水发动机冷却剂凝固点的试验方法

Standard Test Method for Freezing Point of Aqueous Engine Coolants

实施日期：2012-10-01

EJ/T 721-1992

压水堆冷却剂压力边界材料断裂韧性要求

实施日期：1993-06-01

BS 5117-2.4-1985

Pruefung von korrosionshemmendem Kuehlmittelkonzentrat fuer Motoren (Frostschutzmittel). Verfahren zur Pruefung der korrosionshemmenden Wirkung. Statischer Motortest Testing Corrosion Inhibiting,Engine Coolant Concentrate ('Antifreeze') Part 2:Methods of Test for Corrosion Inhibition Performance Section 2.4:Static Engine Test Essais du liquide de refroidissement anti-rouille du moteur (antigel). Methodes d'essai du rendement d'inhibition de corrosion. Essai statique dans le moteur

实施日期：1985-01-01

BS EN 60034-2-1999

旋转电机.往复式内燃机(RIC)引擎驱动发电装置交流发电机

Drehende elektrische Maschinen. Verfahren zur Bestimmung der Verluste und des Wirkungsgrades von drehenden elektrischen Maschinen aus Pruefungen (ausgenommen Maschinen fuer Schienen-und Strassenfahrzeu...

适用范围：This Recommendation applies to d.c. machines and to a.c. synchronous and induction machines of all sizes within the scope of IEC Publication 34-1. The principles can, however, be applied to other types...

实施日期：1999-10-15

BS EN 12546-3-2000

与食品接触的材料和器具.家用保温容器.热包装材料规范

Materialien und Gegenstaende in Kontakt mit Lebensmitteln. Isolierbehaelter zum Gebrauch im Haushalt. Beschreibung von Kuehlakku Materials and Articles in Contact with Foodstuffs-Insulated Containers f...

适用范围：This standard specifies requirements for sealed, non-refillable, re-usable cooler packs, also known as ice packs, intended for use with insulated domestic food containers. This standard is not applicab...

实施日期：2000-07-15

BS ISO 16232-4-2007

Stra?enfahrzeuge. Sauberkeit von Komponenten für Fluidsysteme. Probengewinnung durch Ultraschallreinigung zum Nachweis von Partikeln Road vehicles. Cleanliness of components of fluid circuits. Part 4:Method of extraction of contaminants by ultrasonic techniques Véhicules routiers. Propret des composants des circuits de fluide. Méthode d'extraction des contaminants par ultrasons

实施日期：2007-06-29

DIN 8986-2012

Cold rooms. Constructional safety requirements

实施日期：2012-10-01

DIN 41751-1977

整流器; 半导体整流装置和整流器设备, 冷却型

Static power convertors; semiconductor convertor assemblies and equipments, cooling methods

适用范围：Static power convertors, semiconductor convertor assemblies and equipments, cooling methodsDiese Norm enth?lt eine ?bersicht der gebr?uchlichen Kühlarten von Halbleiter-Stromrichters?tzen und -ger?ten ...

EN 60034-3-2008

Rotating electrical machines Part 3: Specific requirements for cylindrical rotor synchronous machines

NF C51-113-2008

Rotating electrical machines - Part 3 : specific requirements for synchronous generators driven by steam turbines or combustion gas turbines.

DIN EN 12546-3-2000

与食品接触的材料和物品.家用隔离器.第3部分:热包装的规范

Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs; German version prEN 12546-3:1996

UL 416-1993

UL Standard for Safety Refrigerated Medical Equipment Fourth Edition; Reprint with Revisions Through and Including March 16, 2010

发布日期：1993-08-30  实施日期：1993-08-30

DIN EN 60034-2-1-2008

旋转电机 第2-1部分:从试验测定损耗和效率的标准方法(不包括牵引车辆用电机)

Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

实施日期：2008-08-01

EN 1109-2013

防水柔性板 屋顶防水用沥青板 低温下柔韧性的测定

Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature

实施日期：2013-04-01

ASTM D4340-1996(2007)

在排热条件下发动机冷却剂对铸造铝合金腐蚀性的测试方法

Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions

适用范围：<p id="s00009">It is essential that engine coolants prevent heat-transfer corrosion of aluminum cylinder heads during engine operation. Any corrosion products formed may deposit on interior radiator su...

实施日期：1996-06-10

ASTM D1882-1996(2006)

冷却系统化学溶液对汽车有机面漆影响的试验方法

Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles

适用范围：<p id="s00010">This test method will distinguish between cooling system chemical solutions that do or do not have a tendency to change the surface appearance when applied to organic finishes used on ve...

实施日期：1996-04-10