BS EN 12703-2012

Adhesives for paper and board,packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature

发布日期：2012-03-31 

NF G52-032-2003

Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings.

DIN EN 4170-2008

Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle

实施日期：2008-08-01

YB/T 376.3-2004

耐火制品 抗热震性试验方法 第3部分： 水急冷—裂纹判定法(2010确认)

Refractory products-Determination of thermal shock resistance Part 3:Water quenching-crack

发布日期：2004-06-17  实施日期：2004-11-01

NF A89-216-1-2005

Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1 : general.

BS EN ISO 17642-2-2005

金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.自束试验

Zerstoerende Pruefung von Schweissverbindungen an metallischen Werkstoffen. Kaltrisspruefungen fuer Schweissungen. Lichtbogenschweissprozesse. Selbstbeanspruchende Pruefungen Destructive tests on welds...

适用范围：ISO 17642-2:2005 specifies the sizes of the test pieces, the specimens and the procedures for carrying out self-restraint cold cracking tests by:CTS (controlled thermal severity) testTekken (Y-groove) ...

实施日期：2005-04-12

EN ISO 17233-2002

Leather. Physical and mechanical tests. Determination of cold crack temperature of surface coatings ISO 17233:2002

实施日期：2002-12-01

NF A89-216-2-2005

Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2 : self-restraint tests.

GB/T 9446-1988

焊接用插销冷裂纹试验方法

Welding--Cold cracking test method using implants

适用范围：本标准规定了用环形或螺形缺口试样进行的插销冷裂纹试验方法。 本标准适用于钢材焊接冷裂敏感性的评定。

发布日期：1988-06-24  实施日期：1989-03-01

BS EN ISO 17642-1-2004

金属材料中焊接的有损检验.焊接的冷裂试验.弧焊工艺.总则

Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes. General

适用范围：ISO 17642-1:2004 describes the fundamentals of cold crack formation and the principles of cold cracking tests.These tests can be used to determine the cold cracking sensitivity of welding consumables, ...

ISO/TR 17844-2004

焊接 避免冷裂标准化方法的对比

Welding -- Comparison of standardised methods for the avoidance of cold cracks

适用范围：ISO/TR 17844:2004 contains further methods, in addition to those given in ISO/TR 17671-2, for avoidance of cold cracking. The document gives guidance on the manual, semi-mechanized, mechanized and auto...

发布日期：2004-09-01  实施日期：2004-09-01

DIN-Fachbericht CEN ISO/TR 17844-2004

焊接 避免冷裂标准方法的比较

Welding - Comparison of standardised methods for the avoidance of cold cracks (ISO/TR 17844:2004)

适用范围：In addition to EN 1011-2/ISO TR 17671-2, this document contains further methods for avoidance of cold cracking used by other members of ISO. This document gives guidance for manual, semi-mechanized, me...

BS EN ISO 17642-3-2005

Zerstoerende Pruefung von Schweissverbindungen an metallischen Werkstoffen. Kaltrisspruefungen fuer Schweissungen. Lichtbogenschweissprozesse. Fremdbeanspruchte Pruefungen Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 3:Externally loaded tests Essais destructifs des soudures sur materiaux metalliques. Essais de fissuration a froid des assemblages soudes. Procedes de soudage a l'arc. Essais sur eprouvette soumise a une charge exterie

实施日期：2005-11-03

EN 4170-2007

Aerospace series. Paints and varnishes. Test method for measurement of resistance to cold crack temperature cycle

实施日期：2007-07-01

ISO 17233-2002

皮革 物理和力学试验 表面涂层冷裂温度的测定

Leather -- Physical and mechanical tests -- Determination of cold crack temperature of surface coatings

适用范围：ISO 17233:2002 specifies a method for determining the cold crack temperature of surface coatings applied to leather. It is applicable to all leathers which have a surface coating and which can be easil...

发布日期：2002-12-01  实施日期：2002-12-01

DIN EN ISO 17642-1-2004

金属材料焊接头的破坏性试验 焊接冷裂缝试验 电弧焊工艺 第1部分:总则

Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General

NF A89-216-3-2005

Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3 : externally loaded tests.

ISO 17642-2-2005

金属材料焊接的破坏性试验 焊件冷裂试验 电弧焊工艺 第2部分:自律试验

Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests

适用范围：ISO 17642-2:2005 specifies the sizes of the test pieces, the specimens and the procedures for carrying out self-restraint cold cracking tests by: CTS (controlled thermal severity) test Tekken (Y-groove...

发布日期：2005-03-01  实施日期：2005-03-01

DIN EN ISO 17233-2003

皮革 物理和力学试验 表面涂层冷裂温度的测定

Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002)

适用范围：This European Standard specifies a method for determining the cold crack temperature of surface coatings applied to leather. It is applicable to all leathers which have a surface coating and which can ...

EN ISO 17642-3-2005

金属材料焊接的破坏性试验 焊件冷裂试验 电弧焊工艺 第3部分：外部加载试验

Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes. Part 3:Externally loaded tests ISO 17642-3:2005

发布日期：2005-03-01  实施日期：2005-03-01