ISO 702-2 CORR 1-2009

Machine tools. Connecting dimensions of spindle noses and work holding chucks. Part 2:Camlock type technical corrigendum 1 second edition

实施日期：2009-10-15

EN 3759-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Threaded to Head,in Heat and Corrosion Resisting Steel,Passivated. Classification:1 100 MPa (at Ambient Temperature)/425 Degrees C

实施日期：1996-09-01

NF L22-296-1979

全螺纹开槽紧旋圆柱头螺钉 ISO 螺纹

Slotted and drilled cheese head screws, fully threaded. ISO thread.

NF L22-221-1983

无紧锁丝孔内六角圆柱头螺钉 4h类ISO 螺纹

Hexagon socket head cap screws without hole for locking wire. ISO thread 4 H class.

NF F00-024-1978

动配合用精加工配合螺栓

Railway material in general. Finished clearance fit bolts.

EN 2897-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Close Tolerance Normal Shank,Short Thread,in Alloy Steel,Cadmium Plated. Classification:1100 MPa (at Ambient Temperature)/235 Degrees C

实施日期：1996-07-01

DIN 65254-2002

六角插柄内多角螺钉旋具头

Hexagon insert bits - for screws with internal serrations

适用范围：The document applies to hexagon insert bits for screws with internal serration. The dimensions of the insert tip are in accordance with DIN 2325. These screwdriver bits are used e.g. for cheese head sc...

NF F00-023-1978

紧配合用精加工配合螺栓

Railway material in general. Finished tight-fit bolts.

DIN 34813-1999

塑料十字槽圆头螺钉

Plastic cross recessed cheese head screws

适用范围：The document contains dimensional and performance requirements for cross recessed cheese head screws made of plastic material and specifies their designation.

NF L22-156-1975

锥顶凸圆头开槽螺钉,国际单位米制螺纹

Slotted raised cheese head screws with cone point. Sim thread (rech.).

实施日期：1975-01-01

ISO 702-3-2007

机床 主轴端部与卡盘连接尺寸 第3部分:卡口型

Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 3: Bayonet type

适用范围：ISO 702-3:2007 specifies the sizes for interchangeability of bayonet-type lathe spindle noses and corresponding face plates.

发布日期：2007-10-01  实施日期：2007-10-01

EN 3307-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Threaded to Head,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1 100 MPa (at Ambient Temperature)/315 Degrees C

实施日期：1996-09-01

NF L24-183-1996

Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification : 900 MPa (at ambient temperature) / 235 degrees celsius.

NF L24-186-1997

Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.

BS EN 2650-1997

头部加螺纹的钝化耐蚀钢制大柱头有槽螺钉.等级:600MPa(室温)/425℃

Flachkopfschrauben mit Schlitz,Gewinde annaehernd bis Kopf,aus korrosionsbestaendigem Stahl,passiviert. Klasse:600 MPa (bei Raumtemperatur)/425°C Screws,Pan Head,Slotted,Threaded to Head,in Corrosion R...

适用范围：This standard specifies the characteristics of screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification : 600 MPa <up1)> / 425 ℃ <up2)> note:1) Minimum ten...

实施日期：1997-01-15

EN 2884-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Coarse Tolerance Normal Shank,Short Thread,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1100 MPa (at Ambient Temperature) / 315 Degrees C

实施日期：1996-01-01

ISO 898-1-2009

碳钢和合金钢制紧固件的机械性能 第1部分:带指定特性的螺栓、螺钉和螺柱 粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread

适用范围：ISO 898-1:2009 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners — th...

发布日期：2009-04-01  实施日期：2009-04-01

DIN 8377-2006

内六角圆柱头螺钉和一字槽圆柱头螺钉用通孔和沉孔加工的莫氏锥柄多刃阶梯麻花钻

Subland Twist Drills with Morse Taper Shank for Clearance Holes and Counterbores for Hexagon Socket Head Cap Screws and Slotted Cheese Head Screws

实施日期：2006-11-01

EN 3037-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Close Tolerance Normal Shank,Short Thread,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1 100 MPa (at Ambient Temperature)/315 Degrees C

实施日期：1996-09-01

QJ 2387-1992

平凸头螺钉

发布日期：1992-03-24  实施日期：1992-11-01