HB 2940-1991

丁字型材切断冲模

发布日期：1991-08-03  实施日期：1991-10-01

DIN VDE 0100-537-1999

建筑电气安装.第5部分:电气设备的选择和建立.第53节:开关和控制设备.第537段:绝缘和开关装置

Elektrische Anlagen von Gebaeuden Teil 5:Auswahl und Errichfung elektrischer Betriebsmittel kapitel 53:Schaltgeraete und Steuergeraete Abschnitt 537:Geraete zum Trennen und Schalten

实施日期：1999-06-01

BS EN 60601-2-33-2002+A2-2008

Medical electrical equipment. Particular requirements for the safety of magnetic resonance equipment for medical diagnosis

实施日期：2002-10-18

EN 12098-4-2005

Controls for heating systems. Part 4:Optimum start-stop control equipment for electrical systems

实施日期：2005-09-01

DIN 3586-2003

煤气热启动关闭装置 要求和试验

Thermally activated shutting-off devices for gas - Requirements and testing

适用范围：This national standard specifies the requirements and tests of thermal triggered shutting-off devices up to a nomianl diameter of DN 150, which are operated with gases according to the Technical regula...

DIN EN 61140-2007

Protection against electric shock - Common aspects for installation and equipment (IEC 61140:2001 + A1:2004, modified); German version EN 61140:2002 + A1:2006

实施日期：2007-03-01

BS EN ISO 8442-1-1998

与食品有关的材料和物品.餐具和桌上凹型器皿.食品准备餐具的要求

Materials and Articles in Contact with Foodstuffs-Cutlery and Table Holloware Part 1:Requirements for Cutlery for the Preparation of Food Supersedes BS 6813:1987;

适用范围：This Part of this Standard specifies material and performance requirements and test methods for metal cutlery and related implements intended for use in the preparation of food. Two grades of cutlery a...

实施日期：1998-02-15

IEC 60947-5-6-1999

低压开关设备和控制设备 第5-6部分:控制电路电器和开关元件 接近传感器和开关放大器用直流连接器件（NAMUR）

Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)

适用范围：Applies to proximity sensors connected for operation by a two-wire connecting cable to the control input of a switching amplifier. The switching amplifier contains a d.c. source to supply the control c...

发布日期：1999-12-17  实施日期：1999-12-17

BS EN 60204-1-2006+A1-2009

机械设备安全性.机械设备用电气设备的一般要求

Safety of machinery. Electrical equipment of machines. General requirements

发布日期：2006-06-30  实施日期：2006-06-30

NF E29-417-5-2004

Safety devices for protection against excessive pressure - Part 5 : controlled safety pressure relief systems (CSPRS).

HG/T 3236-2006

橡胶机械用气动二位切断阀

Pneumatic shut-off control valves for rubber machinery

适用范围： 本标准规定了橡胶机械用气动二位切断阀（以下简称切断阀）的产品型号、基本参数、结构、要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于由气动薄膜执行机构或气动活塞执行机构和二通阀或三通阀组成的气功二位...

发布日期：2006-07-26  实施日期：2007-03-01

ASME B107.500-2010

钳子

Pliers

适用范围：This Standard provides performance and safety requirements for pliers and shears. The following pliers are in the scope of this document: - Pliers: diagonal cutting and end cutting; - Pliers: long nose...

实施日期：2010-01-01

NF E63-701-2010

铸模和制芯机械及设备和有关装置的安全要求

Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant associated equipment.

EN 61029-2-10-2010

Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders

发布日期：2010-04-02  实施日期：2010-04-02

ISO 4126-1-2004

过压保护用安全装置 第1部分:安全阀

Safety devices for protection against excessive pressure -- Part 1: Safety valves

适用范围：ISO 4126-1:2004 specifies general requirements for safety valves irrespective of the fluid for which they are designed. It is applicable to safety valves having a flow diameter of 6 mm and above which ...

发布日期：2004-02-01  实施日期：2004-02-01

EN 15164-2008

Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines

实施日期：2008-05-01

BS EN ISO 19432-2008

Building construction machinery and equipment. Portable, hand-held internal combustion engine driven cut-off machines. Safety requirements and testing

实施日期：2009-05-31

BS ISO 21538-2004

超磨料切断砂轮用坯件.安装和固定孔.建筑施工和土木工程

Blanks for superabrasive cutting-off wheels. Mounting and fixing bores. Building construction and civil engineering

适用范围：ISO 21538:2004 specifies dimensions for mounting and fixing bores in blanks. These mounting and fixing bores comply with the relevant dimensions of the clamping flanges specified in ISO 21537-2:2004.

DIN EN 60947-5-5-2005

低压开关设备和控制设备 第5-5部分:控制电路电器和开关元件 具有机械锁扣功能的电气紧急故障中断器件

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

实施日期：2005-11-01

HG 3158-2005

液化气体罐车用紧急切断阀

适用范围： 本标准规定了液化气体罐车上的紧急切断阀（以下简称切断阀）的结构设计、性能、材料、制造、试验与检验、标志与供货等要求。 本标准适用于液化气体罐车上的切断阀。其公称压力为1.OMPa及2.5MPa，公称通径为25mm～150mm，工...

实施日期：2006-07-01