NF E22-201-4-2006

Ball screws - Part 4 : axial rigidity.

BS ISO 14610-2012

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature

发布日期：2012-09-30  实施日期：2012-09-30

QJ 1919-1990

弹道式导弹弹体结构强度与刚度设计规范

发布日期：1990-02-13  实施日期：1990-12-01

NF T57-105-1998

纤维增强塑料复合物 弯曲性能的测定

Fibre-reinforced plastic composites. Determination of flexural properties.

BS ISO 14707-2000

表面化学分析.辉光放电发射光谱.使用介绍

Optische Emissionsspektrometrie mit Glimmentladungsquelle (GO-OES). Einfuehrung in die Anwendung Surface Chemical Analysis-Glow Discharge Optical Emission Spectrometry (GD-OES)-Introduction to Use Anal...

适用范围：This International Standard provides guidelines that are applicable to bulk and depth profiling GD-OES analyses. The guidelines discussed herein are limited to the analysis of rigid solids, and do not ...

实施日期：2000-11-15

DIN EN 915-2009

Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety

实施日期：2009-01-01

ISO 15822-2007

对角线变形时门打开性能的试验方法 在地震状况下

Test method of doorset opening performance in diagonal deformation -- Seismic aspects

适用范围：ISO 15822:2007 specifies the test method for evaluating the opening function of single-leaf doorset under in-plane diagonal deformation by in-plane static load.

发布日期：2007-06-01  实施日期：2007-06-01

JIS K7118-1995

硬质塑料疲劳试验方法通则

General rules for testing fatigue of rigid plastics

QJ 838-1984

JPZ型三向等刚度减震器

发布日期：1985-05-01  实施日期：1985-11-01

ASTM D1388-2008(2012)

织物硬挺度试验方法

Standard Test Method for Stiffness of Fabrics

实施日期：2008-07-01

BS ISO/IEC 10373-1-2006

标识卡 试验方法 第1部分:一般特征试验

Identifikationskarten. Pruefverfahren. Generelle Eigenschaften Identification Cards-Test Methods-Part 1:General Characteristics Tests Cartes d'identification. Methodes d'essai. Caracteristiques general...

适用范围：ISO 10373 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC7810. Each test method is cross-referenced to one or more base standards, which ma...

实施日期：2006-05-31

BS 3221-1-1985

药用量具.满刻度50ml的药用量具规范

Medizinische Messgefaesse. Medizinische Messgefaesse mit einem Nennvolumen von 50 ml Medicine measures. Part 1:Specification for medicine measures of 50 mL total graduated capacity Mesures medicamenteu...

适用范围：Specifies requirements for materials, surface finish, tolerance on capacity, scale, stability, resistance to hot water, rigidity and marking of glass and plastics medicine measures of 50 mL capacity.

实施日期：1985-01-01

GB/T 13574-1992

金属切削机床 静刚度检验通则

Metal-cutting machine tools--Test code for static rigidity

适用范围：本标准规定了检验金属切削机床(以下简称机床)静刚度的基本要求和检验方法。　　本标准适用于机床。

发布日期：1992-07-17  实施日期：1993-04-01

ISO 20585-2005

人造板 浸入70℃或100℃(沸点)水后湿弯曲强度的测定

Wood-based panels - Determination of wet bending strength after immersion in water at 70 degrees C or 100 degrees C (boiling temperature)

适用范围：ISO 20585:2005 specifies methods for determining the bending strength of particleboards and fibreboards after immersion in hot water. Method A is applicable for water at 70 degrees Celsius and Method B...

发布日期：2005-10-01  实施日期：2005-10-01

BS EN 1065-1999

可调节套筒式钢脚手架.产品规范、设计和通过计算和试验进行的评估

Bausthtzen aus Stahl mit Ausziehvorrichtung. Produktfeslegungen,Bemessung und Nachweis durch Berechnung und Versuche Adjustable Telescopic Steel Props-Product Specifications,Design and Assessment by Ca...

适用范围：This European Standard specifies materials, design requirements, corrosion protection alternatives together with assessment methods using both calculations and testing for open thread and covered threa...

实施日期：1999-11-15

NF P98-200-1-1991

有关人行道的试验.滚动负荷引起的偏斜度测量.第1部分:定义,测量手段,性能数值

Road testing. Measurement of a rolling load deflection. Part 1 : definitions, measurements, specific values.

实施日期：1991-06-30

DIN 68874-1-1985

家具镶嵌地板和家具地板支架.对家具的要求和检验

Shelves and shelf bearers in cabinet furniture; requirements and testing when mounted in the cabinet

BS EN 1228-1997

塑料管道系统.玻璃纤维增强热固塑料(GFK).特殊初始环状刚性的测算

Kunststoff-Rohrleitungssysteme. Rohre aus glasfaserverstaerkten duroplastischen Kunststoffen (GFK). Ermittlung der spezifischen Anfangs-Ringsteifigkeit Plastics Piping Systems-Glass-Reinforced Thermose...

适用范围：This standard specifies methods for determining the initial specific ring stiffness of glass-reinforced thermosetting plastics (GRP) pipes. Two methods are given and within the specified deflection lim...

实施日期：1997-04-15

BS EN 3286-1994

飞机用轴承.不锈钢制单列向心球轴承.直径系列0和2.尺寸和负载

Flugwerklager. Einreihige Rillenkugellager aus Korrosionsbestaendigem Stahl. Durchmesserreihen 0 und 2. Normale Lagerluft. Masse und Belastungen Bearings,Airframe Rolling-Rigid Single Row Ball Bearings...

适用范围：This standard specifies the characteristics of rigid single row ball bearings in corrosion resisting steel of diameter series 0 and 2 <up1)> designed to withstand only slow rotations and oscillations u...

实施日期：1994-01-01

NF T51-170-3-2006

Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3 : bent strip method.