EN 3044-1998

Aerospace Series. Installation Holes for Inserts,Screw Thread,Helical Coil,Self-Locking. Design Standard

实施日期：1998-05-01

DIN 25005-2005

轨道车辆 标示规则 交通方位、部件命名

Railway vehicles - Rules for representation - Direction of orientation, designation of components

适用范围：The document applies for railway vehicles in general. It defines the direction of orientation for railway vehicles and also defines the designation for the ends of vehicles and driver cabs. In addition...

实施日期：2005-09-01

DIN 509-2006

Technical drawings - Relief grooves - Types and dimensions

实施日期：2006-12-01

DIN 5481-2005

花键轴

Serration shafts

适用范围：This standard is for serration shafts (serrations) with constant space angle of 60?at external toothing, 28 to 42 teeth and pitch diameters from 7 mm up to 60 mm.Serrations as in this standard are used...

实施日期：2009-01-01

EN 3676-1998

Aerospace Series. Inserts,Thin Wall,Self-Locking. Design Standard

实施日期：1998-01-01

EN ISO 1101-2013

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2012, including Cor 1:2013)

发布日期：2013-02-20  实施日期：2013-02-20

DIN ISO 3547-2-2000

滑动轴承.轴压.第2部分:外径和内径的试验数据

Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameter (ISO 3547-2:1999)

适用范围：The document contains test data on drawings to enable the checking of the internal and external diameter of wrapped bushes.

DIN 3966-3-1980

图样上啮合的说明 蜗杆和蜗轮啮合的说明

Worms and worm wheels; information to be given to the manufacturer by the purchaser in order to obtain the gear required

适用范围：Worms and worm wheels; Information to be given to the manufacturer by the purchaser in order to obtain the gear requiredVis et roues à vis; indications à fournir au tailleur d'engrenages par le client ...

DIN 1684-1-1998

韧性铸钢件.一般公差.加工余量

Steel raw castings of malleable iron - General tolerances, machining allowances; inactive for new design

适用范围：The document applies to general tolerances and required machining allowances, if applicable, for malleable iron rough castings surfaces to be machined. General tolerances for angular dimensions are not...

DIN ISO 15787-2010

Technical product documentation - Heat-treated ferrous parts - Presentation and indications

实施日期：2010-01-01

BS EN 3635-2008

Luft-und Raumfahrt. Rohranschlussenden geschwei?t. Masse Aerospace series. Weld lip. Geometrical configuration Série aérospatiale. Embout. souder. Configuration géometrique

实施日期：2008-05-30

DIN EN ISO 1101-2008

产品几何技术规范(GPS).几何公差.形状、方位、定位和偏转公差

Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out

实施日期：2008-08-01

SITSI/CH 001-1996

中国1:100万土地类型图制图规范

EN 2574-1990

Welds Information on Drawings

实施日期：1990-01-01

ISO 2692-2006

产品几何量技术规范(GPS) 几何公差 最大实体要求(MMR)、最小实体要求(LMR)和可逆要求(RPR)

Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

适用范围：ISO 2692:2006 defines the maximum material requirement, the least material requirement and the reciprocity requirement, and specifies their applications. These requirements are used to control specific...

发布日期：2006-12-01  实施日期：2006-12-01

DIN 2425-6-1982

供电、供水和输电线路设计工程 水工结构、防洪及岸防护图和平面图

Plans for public utilities, water resources management and for long-distance pipelines; Maps and plans for water engineering, flood and coastal protection

适用范围：Plans for public supplies, for water engineering and for transmission lines; maps and plans for design of waterways, flood and coastal protection

ISO 3547-2-2006

滑动轴承 卷制轴套 第2部分:外径和内径的测试数据

Plain bearings -- Wrapped bushes -- Part 2: Test data for outside and inside diameters

适用范围：ISO 3547-2:2006 specifies the test data for outside and inside diameters of wrapped bushes made of solid and multi-layer bearing material for plain bearing applications. It also specifies test designat...

发布日期：2006-10-01  实施日期：2006-10-01

DIN 6790-1-2008

Technical product documentation - Specification by terms in documents - Part 1: Explanations

实施日期：2008-12-01

ISO 225-2010

紧固件 螺栓、螺钉、螺柱和螺母 尺寸代号和标注

Fasteners -- Bolts, screws, studs and nuts -- Symbols and descriptions of dimensions

适用范围：ISO 225:2010 defines the symbols and gives descriptions of the dimensions of bolts, screws, studs and nuts in English, French and Russian, for use in the appropriate product standards and drawings. The...

发布日期：2010-10-01  实施日期：2010-10-01

EN 3633-2008

Aerospace series. Installation hole for fluid fittings,flanged

实施日期：2008-05-01