DIN EN 3381-1996

航空和航天.钛合金制、阳极氧化、MoS2润滑、小间隙、标准杆、短螺纹、标准头、100°沉孔螺钉.等级:1100MPa(在大气温度下)/315℃

Aerospace series - Screws, 100<Grad> countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated - Classification: 1100...

适用范围：The document specifies the characteristics of screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated.

EN 3759-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Threaded to Head,in Heat and Corrosion Resisting Steel,Passivated. Classification:1 100 MPa (at Ambient Temperature)/425 Degrees C

实施日期：1996-09-01

GB/T 6562-1986

十字槽半沉头自攻锁紧螺钉

Cross recessed raised countersunk head thread forming screws

适用范围：本标准规定了螺纹规格为M2.5～M6的十字槽半沉头自攻锁紧螺钉。

发布日期：1986-07-01  实施日期：1987-04-30

BS EN 4497-2005

Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1 100 MPa (at ambient temperature) / 315 $0DC

实施日期：2006-01-31

NF L22-186-1976

有BNAE十字槽锥顶扁头螺钉 国际单位米制螺纹

Mushroom head screws with B.N.A.E. Cross recess and cone point. Sim thread.

EN 3035-1996

Aerospace Series. Screws,100 Degree Countersunk Normal Head,Offset Cruciform Recess,Close Tolerance Normal Shank,Short Thread,in Alloy Steel,Cadmium Plated. Classification:1 100 MPa (at Ambient Temperature)/235 Degrees C

实施日期：1996-09-01

DIN 65557-1989

航空和航天;钛合金制,螺纹接近头部,带肋状翼形交叉缝和MJ螺纹的平头螺钉

Aerospace; pan head screws with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 <Grad>C

适用范围：This standard contains specifications pertinent to manufacture and use such as dimensions and designation, material, surface treatment, marking and technical specifications.#,,#

DIN 65519-1984

航空和航天.钢制短螺纹、有肋条、盘头十字槽和MJ螺纹的平头螺钉.额定抗拉度900MPa、温度235℃以下

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 <Grad>C

适用范围：Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235℃Aéronautique et espace; vis à tête cylindriq...

GB/T 950-1986

十字槽圆头木螺钉

Cross recessed round head wood screws

适用范围：本标准规定了公称直径为2～10 mm的十字槽圆头木螺钉。

发布日期：1986-07-01  实施日期：1987-05-31

DIN EN 3760-1996

航空和航天.耐热防腐蚀钢制、钝化、标准头、全螺纹、100°沉孔螺钉.等级:1100MPa(在大气温度下)/425℃

Aerospace series - Screws, 100<Grad> countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient tempera...

适用范围：This document specifies the characteristics of srews, 100?countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated.#,,#

EN 2897-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Close Tolerance Normal Shank,Short Thread,in Alloy Steel,Cadmium Plated. Classification:1100 MPa (at Ambient Temperature)/235 Degrees C

实施日期：1996-07-01

CNS 4817-1979

十字头螺丝起子

Screwdrivers for recessed head screws

NF L22-272-1966

航空用ISO 螺纹螺栓螺母 AICMA 十字槽全螺纹半圆头螺钉

Aircraft fasteners. Pan head screws, fully threaded, with A.I.C.M.A. Cross recess.

NF L22-184-1976

有BNAE十字槽120 °埋头螺钉 国际单位米制螺纹

120 degrees countersunk head screws with B.N.A.E. Cross recess. Sim thread.

GB/T 9074.7-1988

十字槽小盘头螺钉和弹簧垫圈组合件

Cross recessed small pan head screw and single coil spring lock washer assemblies

适用范围：本标准规定了螺纹规格为M2.5～M6的十字槽小盘头螺钉和弹簧垫圈组合件。

发布日期：1988-04-16  实施日期：1989-01-01

DIN 65318-1987

航空和航天;钢制平头螺钉,带肋状翼形交叉缝和MJ螺纹的螺钉

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 <Grad>C

适用范围：This standard contains specifications pertinent to manufacture and use such as dimensions and designation, material, thread, surface treatment, marking and technical specifications.

GB/T 9074.5-1988

十字槽小盘头螺钉和平垫圈组合件

Cross recessed small pan head screw and small plain washer assemblies

实施日期：1989-01-01

DIN EN 3543-1997

航空和航天.耐热不锈钢、钝化、短螺纹、标准杆、标准头、100°沉孔螺钉.等级:1100MPa(在大气温度下)/425℃

Aerospace series - Screws, 100<Grad> countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (...

NF L24-134-1997

Aerospace series. Screws, 100 degrees countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.

NF L22-187-1976

有BNAE十字槽锥顶90°埋头螺钉 国际单位米制螺纹

90 degrees countersunk head screws with B.N.A.E. Cross recess and cone point. Sim thread.