NF C93-780-2-40-2013

Materials for printed boards and other interconnecting structures - Part 2-40 : reinforced base materials clad and unclad - High performance, modified, non-halogenated epoxide woven E-glass laminated sheets of defined flamm

IEC 61988-2-5-2012

等离子体显示板 第2-5部分:测量方法 噪音

Plasma display panels - Part 2-5: Measuring methods - Acoustic noise

适用范围：IEC 61988-2-5:2012 determines the measuring methods for characterizing the performance of PDP modules (plasma display modules): Acoustic noise.

发布日期：2012-05-15  实施日期：2012-05-15

DIN EN 61249-5-4-1997

互连结构的材料.第5部分:带或不带涂层的导电箔或膜的分规范 第4节:导电墨

Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings; section 4: Conductive inks (IEC 61249-5-4:1996); German version E...

适用范围：This document describes those factors which control the flatness of rigid printed boards and their assemblies.

EN 14612-2003

Space product assurance Verification and approval of automatic machine wave soldering

实施日期：2003-08-01

DIN EN 61076-4-107-2002

free part with non-accessible insulation displacement and crimp terminations 电器用连接器.第4-107部分:已评定质量的印制板连接器.铠装两部分连接器的详细规范,基本线距2.0mm,用钎焊或压入固定件;非入绝缘置换和卷边独立件

Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm,fixed part with so...

适用范围：The document specifies two-part connector with 2 or 10 contacts and a basic grid of 2,0 mm.#,,#

实施日期：2002-04-01

GB/T 15157.12-2011

频率低于3MHz的印制板连接器 第12部分：集成电路插座的尺寸、一般要求和试验方法详细规范

Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated...

适用范围：本部分规定了双列直插式集成电路（见 IEC 60191-2-1966 中的规定，如A-50 ）擂座的尺寸、一般要求和试验方法。

发布日期：2011-12-30  实施日期：2012-07-01

IEC 60603-9-1990

印制板用频率低于3MHz的连接器 第9部分:基本网格为2.54mm(0.1in)的印制板、底板和电缆连接器用两件式连接器

Connectors for frequencies below 3 MHz for use with printed boards. Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2.54 mm (0.1 in)

适用范围：Covers a group of related two-part connectors for printed boards and cable connectors associated with printed backpanels. The group covers high-density connectors having up to 96 miniature contacts for...

发布日期：1990-11-30  实施日期：1990-11-30

BS 123600-2001

质量评估体系 分规范 贯穿连接的软-硬性多层印制板

System of Quality Assessment-Sectional Specification-Flex-Rigid Multilayer Printed Boards with Through-Connections

适用范围：To be read in conjunction with BS 123000:2001

实施日期：2001-12-17

NF C93-780-2-4-2002

Materials for printed boards and other interconnecting structures - Part 2-4 : reinforced base materials clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad.

DIN EN 61188-5-3-2008

印制电路板和印制电路板组件 设计和使用 第5-3部分:连接(连接面/接头)考虑事项 两侧带有鸥翼形引线的元件

Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides

实施日期：2008-07-01

EN 60603-6-1998

Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 6: Edge-Socket Connectors and Printed Board Connectors with 2,54 mm (0,1 in) Contact Spacing for Single or Double-Sided Printed Boards of 1,6 mm (0,063 in) Nominal Thickness IEC 60603-6:1987

NF C93-464-3-101-2005

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101 : subracks and associated plug-in units.

GB 4588.2-1984

有金属化孔的单,双面印制板技术条件

实施日期：1985-05-01

DIN 41617-1-1989

印制电路用插接件,（双列、圆销） 销子和弹簧板

Two-part connectors for printed boards, grid 2,5 mm; common mounting features, survey of typs; dimensions of type L, M, N and S

适用范围：The standard is applicable to two-part connectors for printed boards and contains the dimensions of types L, M, N and S.

GB/T 4677.10-1984

印制板可焊性测试方法

Test method of solderability for printed boards

DIN EN 62326-4-1-1997

印制线路板.第4部分:带内层连接的刚性多层印制线路板.分规范.第1节:容量详细规范.性能级A,B和C

Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections; sectional specification; section 1: Capability detail specification; performance levels A, B and C (IEC 62326-4-1:1...

BS EN 61249-2-9-2003

印制板和其他互连结构用材料 第2-9部分:包层和无包层的强化基材 具有规定易燃性的双马来酰亚胺/三嗪改良型或非改良型环氧E-玻璃增强层压片(垂直燃烧试验),铜包层的

Materialien fuer Leiterplatten und andere Verbindungsstrukturen. Kaschierte und unkaschierte verstaerkte Basismaterialien. Kupferkaschierte mit E-Glasgewebe verstaerkte Laminattafeln auf der Basis von ...

适用范围：This part of IEC 61249 gives requirements for properties of bismaleimide/triazine modified epoxide, or unmodified, woven E-glass reinforced laminate sheets of defined flam inability (vertical burning t...

实施日期：2003-08-14

EN 60603-9-1998

Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 9: Two-Part Connectors for Printed Boards, Backpanels and Cable Connectors, Basic Grid of 2,54 mm (0,1 in) IEC 60603-9:1990

GB/T 18373-2001

印制版用E玻璃纤维布

E-glass fabric woven for printed boards

适用范围：本标准规定了印制板用E玻璃纤维布的定义、代号与规格、要求、试验方法、检验规则、标志、包装、运输和贮存。　　本标准适用于以E玻璃连续纤维纱为原料，经织造和表面化学处理而制成的平纹织物，主要用作印制板用层压塑料中的增强材...

发布日期：2001-05-11  实施日期：2001-12-01

BS EN 61249-2-22-2005

印制板和其他互连结构用材料.包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的改良的非卤化环氧编织E型玻璃纤维层压板

Materialien fuer Leiterplatten und andere Verbindungsstrukturen. Kaschierte und unkaschierte verstaerkte Basismaterialien. Kupferkaschierte mit E-Glasgewebe verstaerkte Laminattafeln auf der Basis von ...

适用范围：This part of IEC 61249 gives requirements for properties of modified non-halogenated epoxide woven E-glass laminated sheet 0,05 mm up to 3,2 mm, of defined flammability (vertical burning test), copper....

实施日期：2005-08-24