NF M87-240-2013

Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions.

DIN EN ISO 13802-2006

塑料 摆锤撞击试验机的鉴定 夏比、摆臂和拉伸冲击试验

Plastics -- Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing

适用范围：This standard specifies methods for the verification of pendulum impact-testing machines used for the Charpy impact test, Izod impact test and tensile impact test described in ISO 179-1, ISO 180 and IS...

实施日期：2006-06-01

DIN EN ISO 13680-2010

石油和天然气工业 用作套管、油管和接箍的耐腐蚀无缝合金管 交货技术条件

Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010); English version EN ISO 136...

实施日期：2010-12-01

DIN EN 14638-1-2006

可移动气瓶 容积在150 L以下的可充气焊接气瓶 第1部分:按实验法设计的焊接奥氏体不锈钢钢瓶

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental met...

适用范围：This European Standard gives minimum requirements concerning material, design, construction and workmanship, procedures and tests at manufacture of refillable transportable welded cylinders made of aus...

实施日期：2006-07-01

ISO 179-1-2010

塑料 简支梁冲击性能的测定 第1部分:非仪器化冲击试验

Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test

适用范围：ISO 179-1:2010 specifies a method for determining the Charpy impact strength of plastics under defined conditions. A number of different types of specimen and test configurations are defined. Different...

发布日期：2010-06-01  实施日期：2010-06-01

DIN EN ISO 14556-2006

Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000 + Amd.1:2006); German version EN ISO 14556:2000 + A1:2006

实施日期：2006-10-01

DIN EN ISO 11403-1-2003

塑料 可比较多点数据的测定和表示 第1部分:机械性能

Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:1994); German version EN ISO 11403-1:1999

适用范围：This part of the standard specifies test procedures for the acqisition and presentation of multipoint data on the following mechanical properties of plastics: a) Dynamic modulus b) Tensile properties a...

EN ISO 11403-1-2003

Plastics. Acquisition and presentation of comparable multipoint data. Part 1:Mechanical properties ISO 11403-1:2001

实施日期：2003-03-01

BS EN 14638-3-2010

Ortsbewegliche Gasflaschen. Wiederbefüllbare geschwei?te Gef??e mit einem Fassungsraum von nicht mehr als 150 Liter. Flaschen aus geschwei?tem Kohlenstoffstahl,ausgelegt nach experimentellen Verfahren Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Part 3:Welded carbon steel cylinders made to a design justified by experimental methods Bouteilles. gaz transportables. Récipients soudés rechargeables d'une capacit inférieure ou égale. 150 litres. Bo

实施日期：2010-12-31

EN ISO 148-1-2010

Metallic materials. Charpy pendulum impact test. Part 1:Test method

实施日期：2010-10-01

DIN EN ISO 148-1-2011

金属材料 夏比摆锤冲击试验 第1部分:试验方法

Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2009); German version EN ISO 148-1:2010

适用范围：This part of ISO 148 specifies the Charpy pendulum impact(V-notch and U-notch)test method for determining the energy absorbed in an impact test of metallic materials.

实施日期：2011-01-01

NF M87-207-2005

Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells.

ISO 148-2-2008

金属材料 夏比摆锤冲击试验 第2部分:试验机的检验

Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of testing machines

适用范围：ISO 148-2:2008 covers the verification of the constructional elements of pendulum-type impact testing machines. It is applicable to machines with 2 mm or 8 mm strikers used for pendulum impact tests ca...

发布日期：2008-12-01  实施日期：2008-12-01

BS EN ISO 28941-1-2008

Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials. Designation system and basis for specifications

实施日期：2009-02-28

EN ISO 13680-2010

Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing,tubing and coupling stock. Technical delivery conditions

实施日期：2010-09-01

ASME STP-PT-058-2013

回火焊道条件硬度验收标准

Temper Bead Qualification Hardness Acceptance Criteria

实施日期：2013-06-28

ISO 14556-2000

钢 夏比V形切痕摆式冲击试验 仪器试验法

Steel -- Charpy V-notch pendulum impact test -- Instrumented test method

发布日期：2000-05-01  实施日期：2000-05-01

ISO 28941-1-2008

塑料 聚苯撑醚(PPE)模塑和挤塑材料 第1部分:命名系统和基本规范

Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications

适用范围：ISO 28941-1:2008 establishes a system of designation for PPE thermoplastic materials, which may be used as the basis for specifications. The types of PPE plastic are differentiated from each other by a...

发布日期：2008-12-01  实施日期：2008-12-01

EN ISO 28941-1-2008

Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials. Part 1:Designation system and basis for specifications

实施日期：2008-12-01

NF T53-038-1-2004

Plastics - Methylmethacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1 : designation system and basis for specifications.