NF S63-125-2-2002

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2 : verification of general and safety requirements.

ISO 2314-2009

燃气轮机 验收试验

Gas turbines -- Acceptance tests

适用范围：This International Standard applies to open-cycle gas-turbine power plants using combustion systems supplied with gaseous and/or liquid fuels as well as closed-cycle and semi-closed-cycle gas-turbine p...

发布日期：2009-12-01  实施日期：2009-12-01

IEC 61518-2001

差压(型)测量仪和413Bar(41.3 MPa)以下带法兰的截流装置间的配合尺寸

Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)

适用范围：Applicable to differential pressure (type) measuring instruments (instrument) with a shut-off device (manifold) directly bolted on to them.

发布日期：2001-01-24  实施日期：2001-01-24

BS EN 837-1-1998

压力计.波登压力计.规格,计量,要求和试验

Druckmessgeraete. Druckmessgeraete mit Rohrfedern. Masse,Messtechnik,Anforderungen und Pruefung Pressure Gauges Part 1:Bourdon Tube Pressure Gauges-Dimensions,Metrology,Requirements and Testing Manomet...

适用范围：This European Standard specifies requirements for Bourdon tube (designated by 'B', see clause 12) indicating pressure gauges, vacuum gauges and combined vacuum and pressure gauges (compound gauges), wi...

实施日期：1998-03-15

DIN EN ISO 4256-1999

液化石油气.压力计蒸气压的测定.LPG法

Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996); German version EN ISO 4256:1998

适用范围：The document specifies a method for the determination of the gauge vapour pressure of liquefied petroleum gas products at a temperature from 35 ?up to and including 70 ?

ANSI/ASME B40.100-2013

Pressure Gauges and Gauge Attachments

发布日期：2013-11-20 

DIN SPEC 1107-2010

Hydrometry - Measurement of snow water equivalent using snow mass registration devices

实施日期：2010-05-01

DIN 16272-2004

压力计用带分别断流试验接头的止回阀PN 250和PN 400

PN 250 and PN 400 valves with shut-off test connection for pressure gauges

适用范围：The document defines sizes and materials for PN 250 and PN 400 valves with test connection for pressure measurement.

JIS Z8752-1989

用热阴极和冷阴极电离真空计测定压力的方法

Measuring methods of low pressures by hot cathode and cold cathode ionization gauges

BS 5141-1-1975

空气加热和冷却蛇管规范.第1部分:评价冷却蛇管的试验方法

Specification for air heating and cooling coils. Method of testing for rating of cooling coils

适用范围：Duct-mounted cooling coil rating test with chilled water as the cooling medium within specified ranges of variables for inlet air and water temperatures and for water flow and air velocity.

实施日期：1975-01-01

NF B35-701-1962

电离压力表

Laboratory glassware. Ionisation manometers.

NF S63-125-2-2008

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2 : verification of general and safety requirements.

DIN EN 306-1997

热交换器.规定性能所必需参数的参数测量法

Heat exchangers - Methods of measuring the parameters necessary for establishing the performance; German version EN 306:1997

BS ISO 5892-2013

建筑橡胶衬垫 预成型密实的硫化结构衬垫材料 规格

Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification

发布日期：2013-06-30  实施日期：2013-06-30

JIS K3822-1990

超滤器的比电阻复原特性试验方法

Testing methods for specific resistivity recovery characteristic of water filtered by ultrafiltration modules

适用范围：この規格は，純水製造用限外ろ過モジュールの比抵抗回復特性を，透過水の比抵抗を測定するこきによって，試験する方法について規定する。

ASME MFC-14M-2003

用小孔径精密孔板流量计测量流体流量

Measurement of Fluid Flow Using Small Bore Precision Orifice Meters

适用范围：This Standard specifies the geometric and method of use (installation and flowing conditions) for orifice meters of 6 mm to 40 mm (1/4 in. to 1 Alt+0189 in.) line size when they are inserted in a condu...

NF S63-126-2-2005

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2 : verification of general and safety requirements.

BS EN ISO 5171-2010

Gasschwei?ger?te. Manometer für Schwei?en,Schneiden und verwandte Prozesse Gas welding equipment. Pressure gauges used in welding,cutting and allied processes Matériel de soudage au gaz. Manomètres utilisés pour le soudage,le coupage et les techniques connexes

实施日期：2010-04-30

ASME PTC 29-2005

水轮发电机组的速度调节系统

Speed-Governing Systems for Hydraulic Turbine-Generator Units

适用范围：This Code applies to speed governors used on conventional, constant-speed hydraulic turbines. This Code is applicable to electronic-hydraulic and mechanical-hydraulic speed governors. These governors a...

实施日期：2005-10-31

DIN 16287-2004

压力计阀门和和旋寒试验连接帽

Caps for test connection on valves and cocks for pressure gauges

适用范围：The document specifies dimensions and materials for hoods.