BS EN ISO 1452-1-2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U). General

实施日期：2010-01-31

ISO 7876-5-2004

燃料系统 词汇 第5部分:共轨喷油系统

Fuel injection equipment -- Vocabulary -- Part 5: Common rail fuel injection system

适用范围：ISO 7876-5:2004 establishes a vocabulary for common rail (CR) fuel injection systems for diesel (compression-ignition) engines and their components. The terms defined in this part of ISO 7876 are uniqu...

发布日期：2004-05-01  实施日期：2004-05-01

EN 13766-2010

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification

实施日期：2010-06-01

NF L54-610-1978

低压压缩空气输送用电气开关

Connector, low pressure compressed air starting.

ASME B31.11-2002

泥浆输送管道系统

Slurry Transportation Piping Systems

适用范围：This Code prescribes requirements for the design, materials, construction, assembly, inspection, testing, operation, and maintenance of piping transporting aqueous slurries of nonhazardous materials, s...

DIN EN 15001-1-2011

Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations. Part 1:Detailed functional requirements for design,materials

BS EN 14364-2013

地下压力排水和排污水塑料管道系统 未饱和聚酯树脂(UP)玻璃纤维增强的热固性塑料(GRP) 管道、配件和连接件

Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes,fittings an...

发布日期：2013-03-31  实施日期：2013-03-31

BS EN 714-1995

热塑管道系统.压力管和模塑配件的无端负载轴承弹性密封环型接合件.在无轴向推力时内部流体静力学压力下密封性的试验方法

Rohrleitungssysteme aus Thermoplasten. Nicht zugfests Verbindungen mit elastomeren Dichtringen zwischen Druckrohen und Formstuecken. Pruefverfahren fuer die Dichthei unter hydrostatischen Innendruck oh...

适用范围：This European Standard specifies a method for testing the leaktightness, under internal hydrostatic pressure without end thrust, of assemblies between fittings with elastomeric sealing rings.and thermo...

实施日期：1995-01-01

ISO 10639-2004

加压和无压力供水用塑料管道系统 不饱和聚酯(UP)基树脂的玻璃增强热固塑料(GRP)

Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

适用范围：ISO 10639:2004 specifies the properties of piping system components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) for water supply with or without pr...

发布日期：2004-02-01  实施日期：2004-02-01

CNS 830-1982

压力管路用铸铁管-使用TYTON插承口(LA级)

Cast Iron Pipes for Pressure Lines With TYTON Joints Class LA

发布日期：1957-05-29  实施日期：1982-03-18

BS T 78-1997

Spezifikation fuer 21/2% Nickel-Chrom-Molybdenium Stahlrohre (1390 Mpa) 2 1/2 % Nickel-Chromium-Molybdenum Steel Tubes (1390 MPa) Specification des tubes en acier de 21/2% de nickel-chrome-molybdene (1390 Mpa)

实施日期：1997-05-15

DIN 28601-2000

可锻铸铁管和配件.螺丝套管接头.总成、接套、螺丝环和滑环

Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings

适用范围：The document applies for screwed socket joints for ductile iron pressure pipes and fittings for gas and water pipelines according to DIN EN 545 or DIN EN 969 and for sewerage application according to D...

DIN EN 804-1994

塑料管道系统.压力管道用溶剂--水泥胶合接头的注模承窝配件

Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN...

适用范围：The document specifies a test method for checking the resistance of injection-moulded socket fittings for solvent-cemented joints for pressure piping systems to a short-term internal hydrostatic pressu...

DIN EN 642-1994

包括接头和配件的圆柱型和非圆柱型预应力混凝土压力管及管用预应力钢的具体要求

Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes; German version EN 642:1994

适用范围：The document covers the requirements and the manufacture of prestressed concrete cylinder and non-cylinder pressure pipes and fittings in sizes from DN/ID 500 to DN/ID 4000 inclusive.

EN 295-4-2013

排水和排污陶土管 第4部分:适配器,连接器和弹性联轴器的要求

Vitrified clay pipe systems for drains and sewers. Part 4:Requirements for adaptors,connectors and flexible couplings

实施日期：2013-02-01

DIN EN 14814-2008

Adhesives for thermoplastic piping systems for fluids under pressure - Specifications

实施日期：2008-03-01

ISO 9853-1991

压力管道系统（PE-X）管材和管件 用凝胶含量测定交联度

Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test

发布日期：1991-05-31  实施日期：1991-05-31

CNS 5298-1984

低压软管夹

Hose Clamps for the Lower Pressure

发布日期：1980-03-25  实施日期：1984-07-10

TSG D3001-2009

压力管道安装许可规则

Pressure pipe installation licensing regulation

发布日期：2009-05-08  实施日期：2009-08-01

ASTM A696-1990a(2012)

Standard Specification for Steel Bars,Carbon,Hot-Wrought or Cold-Finished,Special Quality,for Pressure Piping Components

实施日期：1990-08-30