DIN 71429-1989

非焊接带双锥形环垫的螺旋联管节. 使用外套螺母的直形间壁和角形间壁接管

Compression couplings with olives; bulkhead compression couplings small stud and elbow fittings for use with union nuts

适用范围：For nipples, the dimensions, material and rust protection are specified.

BS EN 4024-2009

钛合金管连接件8°30' 带止推金属丝螺母的45°弯头焊接端头

Luft-und Raumfahrt. Rohrverschraubung 8 0' aus Titanlegierung. Winkelverschraubungen 45 mit Anschwei?ende,mit Mutter mit Schubdraht Aerospace series-Pipe coupling 8 Degrees 30' in titanium alloy-Elbows...

适用范围：This standard specifies the characteristics of elbows 45°, welded end, with thrust wire nut, for pipe couplings8°30', in titanium alloy, for aerospace applications.Nominal pressure: up to 28 000 kPaTem...

实施日期：2009-08-31

BS ISO 8434-2-2007

流体动力装置及通用金属管接头.37°扩口管接头

Metallische Rohrverschraubungen für Fluidtechnik und allgemeine Anwendung. 37 B?rdelverschraubung Metallic tube connections for fluid power and general use. Part 2:37 flared connectors Raccordements de...

适用范围：This part of ISO 8434 specifies general and dimensional requirements for the design and performance of 37° flared connectors that are suitable for use with ferrous and non-ferrous tubes with outside di...

实施日期：2007-11-30

EN 4111-2006

Aerospace series. Wrenches,splined,socket for pipe fittings. Technical specification

实施日期：2006-05-01

EN 4562-2003

Aerospace series. Pipe coupling,welded,in heat resisting steel. Reductors. Inch series

实施日期：2003-02-01

DIN EN 3082-2004

航空和航天 钛合金制8°30'管配件 修理用带焊接端的屏管

Aerospace series - Pipe coupling 8<Grad>30' in titanium alloy - Unions, bulkhead, with weld end, for repair

适用范围：This standard specifies the characteristics of bulkhead welded unions of the 8?0' pipe coupling system in titanium alloy for aerospace application. They shall be used as repair couplings to replace EN ...

BS EN 3855-2002

钛合金TI-P64001,球形,60度管连接器 盖

Luft-und Raumfahrt. Rohrverschraubungen mit Kugelbuchsen,60 aus Titanlegierung TI-P64001. Kugelstopfen Pipe couplings,60 degree,spherical,in titanium alloy TI-P64001 Caps Serie aerospatiale. Raccords s...

适用范围：To be read in conjunction with EN 3851, EN 3852, EN 3853

实施日期：2002-12-02

DIN EN 3272-2006

航空和航天 钛合金制8°30' 焊接支座密封唇 设计表

Aerospace series; pipe coupling 8<Grad>30<Minute>; dynamic beam seal end for nipple, welded; geometric configuration

适用范围：This standard specifies the dimensions of the dynamic beam seal end for welded ferrules for pipe couplings 8?0', nominal pressure up to 28000 kPa, for aerospace applications.

实施日期：2006-03-01

GB/T 9327.4-1988

电缆导体压缩和机械连接接头试验方法 热循环试验方法

Test methods for compression and mechanical connectorsfor conductors of power cables--Method of heat cycle testing

实施日期：1989-01-01

DIN EN 4194-2002

航空和航天.8°30′钛合金制管连接器.T型,短劲,闷头

Aerospace series - Pipe coupling 8?0<Minute> in titanium alloy - Tees, reduced, bulkhead; German version EN 4194:2001

适用范围：The document specifies the characteristics of tee union, reduced bulkhead in titanium alloy intended for use in aircraft fluid system pipelines.#,,#

BS 778-1966

液压用钢管与接头规范

Stahlrohre und Passstuecke fuer hydraulische Zwecke. Spezifikation Specification for Steel Pipes and Joints for Hydraulic Purposes Tuyaux d'acier et joints a usages hydrauliques. Specification AMD PD 5...

适用范围：For hydraulic fluids such as water and oil. Part 1: Screwed flange joints and hot finished, cold drawn and electric resistance welded pipes <UP>1<UP>7$2T$d3$d2 in to 5$9H in outside diameter for design...

实施日期：1966-01-21

DIN EN 4560-2004

航空和航天 21000 kPa以下联管节37° 英制系列 交货技术条件

Aerospace series - Pipe coupling 37°spherical, up to 21000 kPa - Inch series - Technical specification

GB/T 9327.3-1988

电缆导体压缩和机械连接接头试验方法 短路试验方法

Test method for compression and mechanical connectors for conductors of power cables--Method of short-circuit testing

实施日期：1989-01-01

DIN 65210-2-1987

航空和宇航;额定压力至210bar软导管;软管拧紧螺钉的交货技术条件

Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hose fittings

EN ISO 228-1-2003

Pipe threads where pressure-tight joints are not made on the threads. Part 1:Dimensions,tolerances and designation ISO 228-1:2000

实施日期：2003-02-26

DIN 16837-2006

多层复合管 多层塑料复合管 一般要求和试验

Multilayer pipes - Plastics-Multilayer pipes - General quality requirements and testing

适用范围：This standard specifies general quality requirements and testing for plastics-mMultilayer pipes.

实施日期：2006-04-01

NF L43-406-2002

Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair.

ISO 7169-2007

航空航天 液压系统用24°锥形、压强3000psi或21000kPa以下的可拆卸管接头 采购规范（英制/米制）

Aerospace -- Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa -- Procurement specification, inch/metric

适用范围：ISO 7169:2007 specifies performance and quality requirements for the qualification and manufacture of standard 24° cone fittings and manufacture of 24° cone fittings to ensure reliable performance or e...

发布日期：2007-02-01  实施日期：2007-02-01

EN 4051-2002

Aerospace series. Pipe couplings,60 degree,spherical,in titanium alloy Port connection

实施日期：2002-11-01

DIN EN 4189-2002

航空和航天.8°30′钛合金制管耦合器.T型,闷头,分支连接,长距离运行

Aerospace series - Pipe coupling 8?0<Minute> in titanium alloy - Tees, bulkhead branch, long; German version EN 4189:2001

适用范围：The document specifies the characteristics of tee union, bulkhead side run with thread end for max. 6 mm bulkhead wall thickness in titanium alloy intended for use in aircraft fluid system pipelines.#,...