BS 921-1976

电气用橡胶垫规范

Rubber mats for electrical purposes

适用范围：Solid natural or synthetic rubber insulating mats for covering floor near electrical apparatus where direct contact may occur with conductors of up to 650 V r.m.s. to earth. Construction, dimensions, m...

实施日期：1976-03-31

GB/T 6669-2008

软质泡沫聚合材料 压缩永久变形的测定

Flexible cellular polymeric materials - Determination of compression set

适用范围：本标准规定了测定软质泡沫聚合材料压缩永久变形的三种方法。 　　本标准适用于厚度大于2mm的乳胶泡沫和聚氨酯泡沫塑料。

发布日期：2008-08-19  实施日期：2009-05-01

BS EN 3207-1998

橡胶化合物.技术规范

Kautschukmischungen. Technische Lieferbedingungen Rubber Compounds-Technical Specification Materiaux caoutchouc. Specification technique

适用范围：Specifies the requirements for the qualification and batch acceptance of rubber compounds intended for the manufacture of aerospace parts.

实施日期：1998-07-15

BS EN 2429-1995

乙丙橡胶(EPM/EPDM).硬度:60 IRHD

Luft-und Raumfahrt. Ethylen-Propylen-Elastomer (EPM/EPDM) H?rte 60 IRHD Ethylene-Propylene Rubber (EPM/EPDM) Hardness 60 IRHD (V) Série aérospatiale. Elastomère éthylène-propylène (EPMP/EPDM). Duret 60...

适用范围：This standard specifies the properties of ethylene-propylene rubber (EPM/EPDM) <up1)>, hardness 60 IRHD, for aerospace applications. note:1) Symbol as per ISO 1629

实施日期：1995-01-01

NF L46-020-1998

Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification.

BS 5223-3-1976

医院用床褥规范.第3部分:聚氨基甲酸乙脂软枕头

Specification for hospital bedding. Flexible polyurethane pillows

适用范围：Dimensions, masses, materials, construction, physical requirements for foam and pillow coverings, packaging, for pillows for use by all patients except those under one year old. Optional requirements f...

DIN ISO 7743-2006

Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties (ISO 7743:2004)

实施日期：2006-11-01

HB 5229-1983

航空用低压缩永久变形氟橡胶

适用范围：标准规定了航空用低压缩永久变形氟橡胶的质量要求，可作为生产和使用部门的检验依据。　　本标准规定的胶料主要用于制造工作于空气，石油基滑油、燃油和液压油，硅酸酯和双酯类合成滑油中的活动和固定密封件。本胶料除具有良好...

发布日期：1983-05-23  实施日期：1983-07-01

BS 6997-1990

使用BS 6996丁腈橡胶制成的橡胶环形密封圈('O'形圈)规范

Runddichtringe (O-Ringe) aus Acrylnitrilbutadien-Kautschuk nach BS 6996 Specification for Elastomeric Toroidal Sealing Rings (O-Rings) Manufactured from Acrylonitrile-Butadiene Rubbers Complying with B...

适用范围：Requirements for the composition and physical properties of rings of five different hardness values, for use in particular in contact with mineral oils.

实施日期：1990-08-30

DIN EN 3049-1998

航空和航天.硫化橡胶(FKM)密封圈.低压组.硬度80IRHD

Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998

BS EN 549-1995

燃气器具和设备密封件和隔膜用橡胶材料规范

Rubber Materials for Seals and Diaphragms for Gas Appliances and Gas Equipment

实施日期：1995-01-01

GB/T 4495-1984

橡塑鞋微孔材料压缩变形试验方法

Cellular material for rubber-plastics shoes--Determination of compression set

BS 2775-1987

一般实验室用橡皮塞和橡皮管规范

Specification for rubber stoppers and tubing for general laboratory use

适用范围：Requirements for rubber used and dimensions.

实施日期：1987-01-01

BS EN 278-1991

采用压力达200毫巴可燃气体的家用器具膜片用橡胶材料规范

Elastomer-Werkstoffe fuer Membranen in Haushaltsgeraeten fuer Brenngase bis 200 mbar Rubber Materials for Diaphragms in Domestic Appliances Using Combustible Gases up to 200 mbar Materiaux. base de cao...

适用范围：Requirements and test methods for materials for diaphragms used in domestic gas appliances, and auxiliary equipment up to 200 mbar, both homogeneous and reinforced.

实施日期：1991-01-01

CNS 3560-1985

硫化橡胶压缩永久变形试验法

Method of Test for Permanent Compression Set of Vulcanized Rubber

实施日期：1985-12-18

DIN ISO 3384-2008

Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures

实施日期：2008-07-01

HB 5230-1983

航空用低压缩永久变形氟橡胶Ｏ形密封圈质量标准

适用范围：本标准规定了对航空用低压缩永久变形氟橡胶O形圈的质量要求，可作为生产和使用部门的检验依据。

发布日期：1983-11-28  实施日期：1984-01-01

BS 4443-7-1992+A1-2008

Methods of test for flexible cellular materials. Method 17. Determination of tear strength of flexible cellular material with an integral skin

发布日期：1992-05-01  实施日期：1992-05-01

NF T46-011-1-2008

Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1 : at ambient or elevated temperatures.

EN 3049-1998

Aerospace Series. O-Rings,in Fluorocarbon Rubber (FKM),Low Compression Set. Hardness 80 IRHD

实施日期：1998-05-01