EN ISO 8032-1999

Rubber and Plastics Hose Assemblies. Flexing Combined with Hydraulic Impulse Test (Half-Omega Test)

实施日期：1999-03-01

JIS L1097-1982

合成纤维填絮试验方法

Testing methods for synthetic fibre wadding

适用范围：この規格は，掛ふとんなどに使用される合成繊維ふとんわたの試験方法について規定する。

DIN 52192-1979

木材的检验; 与纤维横方向的压力试验

Testing of wood; compression test perpendicular to grain

适用范围：Testing of wood; compression test perpendicular to grain Essai du bois; essai de compression perpendiculaire aux fibresZusammenhang mit der von der International Organization for Standardization (ISO) ...

SL 237-017-1999

三轴压缩试验（附条文说明）

适用范围：本规程适用于测定细粒土和砂类土的总抗剪强度参数和有效抗剪强度参数。根据排水条件的不同，本试验分为不固结不排水剪(UU);固结不排水剪(CU)和固结排水剪(CD )等3种试验类型。

BS 2F 66-1982

Spezifikation fuer Korkbahnen mit Gummibindung Rubber Bonded Cork Sheets Specification pour liège en plaques. support caoutchouc colle

实施日期：1982-01-01

BS EN 1052-1-1999

砖石的试验方法.压缩强度的测定

Pruefverfahren fuer Mauerwerk. Bestimmung der Druckfestigkeit Methods of Test for Masonry-Part 1:Determination of Compressive Strength Methodes d'essai de la maconnerie. Determination de la resistance ...

适用范围：This European Standard specifies a method for determining the compressive strength of masonry. Guidance is given on the preparation of the specimens, the conditioning required before testing, the testi...

实施日期：1999-01-15

EN ISO 1167-4-2007

Thermoplastics pipes,fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 4:Preparation of assemblies

实施日期：2007-11-01

GB/T 5073-1985

耐火制品压蠕变试验方法

实施日期：1986-01-01

BS EN ISO 9117-2-2010

Beschichtungsstoffe. Trocknungsprüfungen. Druckprüfung zur Bestimmung der Stapelf?higkeit Paints and varnishes. Drying tests Part 2:Pressure test for stackability Peintures et vernis. Essais de séchage. Essai de pression pour aptitude. l'empilement

实施日期：2010-04-30

NF P12-701-1999

Method of test for masonry. Part 1 : determination of compressive strength.

DIN ISO 815-2-2010

硫化橡胶或热塑性橡胶 压缩永久变形的测定 第2部分:在低温下

Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures (ISO 815-2:2008)

实施日期：2010-09-01

NF E29-903-2005

Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections.

ISO 3386-1 AMD 1-2010

Polymeric materials,cellular flexible. Determination of stress-strain characteristics in compression. Part 1:Low-density materials

实施日期：2010-04-15

BS EN 61300-2-11-1997

光纤互联装置和无源部件.基本试验和测量步骤.试验.轴向压缩

Lichtwellenleiter. Verbindungselemente und passive Bauteile. Grundlegende Pruef-und Messverfahren. Pruefungen. Axialer Druck Fibre Optic Interconnecting Devices and Passive Components-Basic Test and Me...

适用范围：The purpose of this part of IEC 1300 is to ensure that the captivation or the attachment of the cable to the fibre optic device will withstand compressive loads likely to be applied during normal servi...

实施日期：1997-10-15

BS EN ISO 1167-1-2006

Rohre,Formstuecke und Zubehoer aus thermoplastischen Kunststoffen fuer den Transport von Fluessigkeiten. Bestimmung der Widerstandsfaehigkeit gegen inneren Ueberdruck. Allgemeines Pruefverfahren Thermoplastics pipes,fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 1:General method Tubes,raccords et assemblages en matieres thermoplastiques pour le transport des fluids. Determination de la resistance a la pression interne. Methode gen

实施日期：2006-08-31

BS 6319-11-1993

建筑用树脂和聚合胶料成分的试验.第11部分:压缩和拉伸时塑性变形的测定方法

Testing of resin and polymer/cement compositions for use in construction. Methods for determination of creep in compression and in tension

适用范围：Creep in compression measured on prisms loaded in hydraulic pressure rigs. Creep in tension measured on necked specimens under dead weight loading. To be read in conjunction with BS 6319-1

NF E62-116-1986

磨床 砂轮安装用法兰盘 设计规则 试验

Grinding machines. Flanges for the mounting of grinding wheels. Design rules. Testing method.

DIN EN 12390-4-2000

硬化混凝土的试验;第4部分:压力强度;试验机规范

Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; German version EN 12390-4:2000

适用范围：The document specifies requirements for testing machines for the testing of the compressive strength of prefabricatad test specimen of hardened concrete.

NF T56-110-2/A1-2010

Flexible cellular polymeric materials - Dermination of stress-strain characteristics in compression - Part 2 : high-density materials - Amendment 1.

CNS 10022-1983

硫化橡胶低温压缩永久变形试验法

Method of test for permanent compression set under low temperature of vulcanized rubber