BS EN 12808-3-2008

M?rtel und Klebstoffe für Fliesen und Platten. Bestimmung der Biege-und Druckfestigkeit Grouts for tiles Part 3:Determination of flexural and compressive strength Mortiers de joints pour carrelage. Détermination de la résistance. la flexion et. la compression

实施日期：2008-11-30

NF T51-405-2005

Phenolic, amino and condensation resins - Determination of free-formaldehyde content.

NF E63-612-1-1998

Rubber and plastics machines. Reaction moulding machines. Part 1 : safety requirements for metering and mixing units.

DIN 16946-1-1989

热固性树脂模塑材料; 注模树脂模塑材料; 检验方法

Cured casting resins; testing

适用范围：Valid for testing of test specimens out of casting resin moulding materials.

IEC 60455-3-8-2013

Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories

发布日期：2013-04-29  实施日期：2013-04-29

BS EN 12808-5-2008

M?rtel und Klebstoffe für Fliesen und Platten. Bestimmung der Wasseraufnahme Grouts for tiles Part 5:Determination of water absorption Mortiers de joints pour carrelage. Détermination de l'absorption d'eau

实施日期：2008-11-30

DIN 16945-1989

热固性树脂; 试剂和热固性树脂模塑材料; 检验方法

Testing of resins, hardeners and accelerators, and catalyzed resins

适用范围：Established for testing of reaction reasins, reactants (hardeners, accelerators etc.) and reaction moulding materials.

ISO 13007-4-2010

瓷砖 灰浆和胶粘剂 第4部分:灰浆试验方法

Ceramic tiles -- Grouts and adhesives -- Part 4: Test methods for grouts

适用范围：ISO 13007-4:2010 describes methods for determining characteristics of grouts used in the installation of ceramic tiles. The test methods described are determination of flexural and compressive strength...

发布日期：2010-09-01  实施日期：2010-09-01

DIN 16946-2-1989

热固性树脂模塑材料; 注模树脂模塑材料; 型号

Cured casting resins; types

适用范围：Types of casting resin moulding materials are defined.

DIN EN 60455-2-2000

电气绝缘用树脂基无活性复合物.第2部分:试验方法

Reaktionsharzmassen fuer die Elektroisolierung Teil 2:Pruefverfahren

实施日期：2000-03-01

DIN 65467-1999

航空和航天.带或不带增强剂的热塑树脂的试验.DSC方法

Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method

适用范围：The test method covered is used to determine the reaction behavior and transition points of materials (also reinforced or filled) in the cured and uncured condition.

DIN EN 60455-3-1-2004

电气绝缘用无溶剂可聚合树脂复合物规范 第3部分:单项材料规范 活页1:未加填料的环氧树脂化合物

Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials; Sheet 1: Unfilled epoxy resinous compounds (IEC 60455-3-1:2003)

实施日期：2004-02-01

BS EN 60455-3-2-2003

电气绝缘用无溶剂可聚合树脂复合物规范 第3部分:单项材料规范 第2分册:填石英的环氧树脂复合物 替代BS 5664-3.2:1997

Reaktionsharzmassen fuer die Elektroisolierung. Anforderungen an einzelne Werkstoffe. Quarzmehlgefuellte Epoxidharzmassen Resin based reactive compounds used for electrical insulation Part 3:Specificat...

适用范围：This part of IEC 60455 contains the requirements for quartz filled epoxy resinous compounds in the cured form for types EP-F-1 to EP-F-7. Other materials than quartz may be introduced later.

实施日期：2003-08-01

DIN EN ISO 7142-2007

Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007)

实施日期：2007-05-01

ISO 13007-4-2013

Ceramic tiles -- Grouts and adhesives -- Part 4: Test methods for grouts

发布日期：2013-10-01  实施日期：2013-10-01

BS EN 14598-2-2005

增强热固性模压复合物.模压塑料板材(SMC)和模塑料块(BMC)规范.试验方法和一般要求

Verstaerkte haertbare Formmassen. Spezifikation fuer Harzmatten (SMC) und faserverstaerkte Pressmassen (BMC). Pruefverfahren und allgemeine Anforderungen Reinforced thermosetting moulding compounds Spe...

适用范围：This part of EN 14598 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of Sheet Moulding Compound (SMC) and Bulk Moulding Compound (B...

实施日期：2005-06-28

NF E63-612-2/IN1-2008

Plastics and rubber machines - Reaction moulding machines - Part 2 : safety requirements for reaction moulding plant.

DIN 18820-1-1991

承载结构件用纺织玻璃纤维增强非饱和聚酯和酚醛树脂叠层板材. 结构,制造,性能

Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); structure, manufacture and characteristics

DIN EN 1612-1-2009

Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units

实施日期：2009-07-01

NF T57-531-1-2005

Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1 : designation.