NF A36-231-2-2013

Hote-rolled flat products made of high yield strength steels for cold forming - Part 2 : technical delivery conditions for thermomechanically rolled steels

BS EN 10149-3-1996

冷成型用高屈服点钢制热轧扁平产品.第3部分:普通退火和轧制钢交货条件

Hot-Rolled Flat Products Made of High Yield Strength Steels for Cold Forming Part 3:Delivery Conditions for Normalized or Normalized Rolled Steels (V)

适用范围：Part 3 of this European Standard, in addition to Part 1, specifies requirements for flat products made of weldable, hot-rolled, high yield strength steels for cold forming. The grades are given in tabl...

实施日期：1996-01-01

JIS Z3155-1993

C形夹具夹持对焊抗断裂试验方法

Method of FISCO test

适用范围：この規格は，被覆アーク溶接，がスンールドアーク溶接及びセルフシールドアーク溶接による炭素鋼，低合金鋼及びステンレス鋼の溶接部に発生する高温割れを調べるC形ジグ拘束突合せ溶接割れ試験方法について規定する。

SJ/T 10146-1991

焊槽法可焊性测试仪技术条件

Specification for solderability test instrument by solder bath method

适用范围：本标准规定了焊槽法可焊性测试仪的主要技术要求、试验方法和检验规则等。它适用于按GB 2423.28电工电子产品基本环境试验规程试验T：锡焊试验方法中规定的可焊性试验方法之一——焊槽法原理制造的可焊性测试仪。它是制定产品...

发布日期：1991-04-02  实施日期：1991-06-30

ISO 17652-2-2003

焊接 和焊接与相关工艺有关底漆的试验 第2部分:底漆的焊接特性

Welding -- Test for shop primers in relation to welding and allied processes -- Part 2: Welding properties of shop primers

适用范围：ISO 17652-2:2003 describes tests for assessing the influence of shop primers on the weldability. The following tests are detailed. Rating test This screening test provides a method of assessing the rel...

发布日期：2003-05-01  实施日期：2003-05-01

EN ISO 18594-2007

Resistance spot-, projection- and seam-welding. Method for determining the transition resistance on aluminium and steel material

实施日期：2007-03-01

EN 10340-2007

Steel castings for structural uses Incorporating corrigendum:August 2008

实施日期：2007-10-01

NF A32-054-2005

Steel castings for general engineering uses.

EN 10028-6-2009

压力容器用钢制扁平产品.可焊接淬火和回火细粒钢

Flat products made of steels for pressure purposes. Part 6:Weldable fine grain steels,quenched and tempered

发布日期：2009-06-01  实施日期：2009-06-01

DIN-Fachbericht ISO/TR 581-2007

Weldability - Metallic materials - General principles; German version ISO/TR 581:2005

实施日期：2007-04-01

DIN EN ISO 28319-2010

牙科 激光焊接

Dentistry - Laser welding (ISO 28319:2010); German version EN ISO 28319:2010

适用范围：This International Standard specifies requirements and test methods for laser welding, in the dental laboratory, of materials suitable for use in metallic restorations and appliances.

实施日期：2010-10-01

NF A89-101-6-2006

Welding - Recommendation for welding of metallic materials - Part 6 : laser beam welding.

BS EN 14587-2-2009

Bahnanwendugen. Oberbau. Abbrennstumpfschwei?en von Schienen. Abbrennstumpfschwei?en neuer Schienen der Stahlsorte R220 R260,R260Mn und R350HT durch mobile Schwei?maschinen an Orten au?erhalb eines Schwei?werkes Railway applications. Track. Flash butt welding of rails Part 2:New R220,R260,R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant Applications ferroviaires. Voie. Soudage des rails par étincelage. Rails neufs de nuance R220,R260,R260Mn et R350HT par

实施日期：2009-04-30

NF A35-520-1-1995

Hot rolled sheet piling of non alloy steels. Part 1 : technical delivery conditions.

NF A87-001-2-2005

Resistance welding - Weldability - Part 2 : alternative procedures for the assessment of sheet steels for spot welding.

NF A35-010-2005

Steel for the reinforcement of concrete - Weldable reinforcing steel - General.

BS EN 10217-6-2002

焊接钢管-技术交货条件-第6部分:指定低温非合金钢管埋弧焊接

Geschweisste Stahlrohre fuer Druckbeanspruchungen. Technische Lieferbedingungen. Unterpulvergeschweisste Rohre aus unlegierten Staehlen mit festgelegten Eigenschaften bei tiefen Temperaturen Welded ste...

适用范围：This Part of EN 10217 specifies the technical delivery conditions in two test categories of submerged arc welded tubes of circular cross section, with specified low temperature properties, made of non-...

实施日期：2002-06-26

BS EN 10297-2-2005

Nahtlose kreisfoermige Stahlrohre fuer den Maschinenbau und allgemeine technische Anwendungen. Technische Lieferbedingungen Nichtrostender Staehle Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Part 2:Stainless steel Tubes sans soudure en acier pour utilisation en mecanique generale et en construction mecanique. Conditions techniques de livraison. Tubes en acier inoxydable CORR17060:April 30,2007

实施日期：2005-12-30

NF A32-061-2007

Steel castings for structural uses.

EN 4632-005-2009

Aerospace series. Weldability and brazeability of materials in aerospace constructions. Part 005:Homogeneous assemblies of heat resisting Ni or Co base alloys

实施日期：2009-12-01