IEEE 1624-2008

Organizational reliability capability

实施日期：2008-09-26

EN 14128-2003

Durability of wood and wood-based products Performance criteria for curative wood preservatives as determined by biological tests

实施日期：2003-12-01

NF E09-081-4-1996

Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 4 : capture efficiency of an exhaust system. Tracer method.

DIN SPEC 15240-2013

Ventilation for buildings - Energy performance of buildings - Inspection of air-conditioning systems

发布日期：2013-10-01  实施日期：2013-10-01

JIS Z9204-1991

有效能评价方法通则

General rules for energy evaluation method by available energy

适用范围：この規格は，エネルギーに関係するエ業設備について有効エネルギ—評価を行う場合の原則について規定する。

SD 208-1987

火力发电厂环境影响报告书编制原则和内容深度规定

EN 60034-29-2008

Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise [Superseded: CENELEC EN 61986]

IWA 4-2009

质量管理体系 地方政府ISO 9001:2008应用导则

Quality management systems -- Guidelines for the application of ISO 9001:2008 in local government

适用范围：The objective of International Workshop Agreement IWA 4:2009 is to provide local governments with guidelines for the voluntary application of ISO 9001:2008 on an integral basis. These guidelines do not...

发布日期：2009-03-01  实施日期：2009-03-01

BS EN 13531-2001+A1-2008

Earth-moving machinery. Tip-over protection structure (TOPS) for compact excavators. Laboratory tests and performance requirements

实施日期：2001-09-26

NF C93-760-1996

Base materials for printed circuits. Part 2 : specifications. Specification number 10 : epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning test).

EN 4617-2006

Aerospace series. Recommended practices for standardising company standards

实施日期：2006-05-20

PD CR 1752-1999

Ventilation for buildings. Design criteria for the indoor environment

BS EN 60034-2-1999

旋转电机.往复式内燃机(RIC)引擎驱动发电装置交流发电机

Drehende elektrische Maschinen. Verfahren zur Bestimmung der Verluste und des Wirkungsgrades von drehenden elektrischen Maschinen aus Pruefungen (ausgenommen Maschinen fuer Schienen-und Strassenfahrzeu...

适用范围：This Recommendation applies to d.c. machines and to a.c. synchronous and induction machines of all sizes within the scope of IEC Publication 34-1. The principles can, however, be applied to other types...

实施日期：1999-10-15

NF A81-365-10-2000

Soft soldering fluxes - Test methods - Part 10 : flux efficacy tests, solder spread method.

ISO 20121-2012

事件持久性管理体系 要求及使用指南

Event sustainability management systems. Requirements with guidance for use

适用范围：ISO 21210:2012 specifies networking protocol functionalities related to IPv6 networking between two or more ITS stations communicating over the global Internet communication network. ISO 21210:2012 ass...

实施日期：2012-06-15

DIN EN 60034-2-2-2010

旋转电机 第2-2部分:从试验测定大型机器分离损耗的特殊方法 IEC 60034-2-1的补充

Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 (IEC 60034-2-2:2010); German version EN 60034-2-2:20...

实施日期：2010-10-01

DIN EN 60034-29-2009

旋转电机 第29部分:等效负载和叠加技术 测定温升的间接试验

Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

实施日期：2009-01-01

NF F57-022-1990

铁路固定设备.调节制动机

Railway fixed equipment. Regulating brake. Characteristics.

IEC/TR 62476-2010

电气和电子产品中关于物质使用限制的产品评定指南

Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products Edition 1.0

发布日期：2010-02-18  实施日期：2010-02-01

NF C93-780-2-23-2005

Materials for printed boards and other interconnecting structures - Part 2-23 : reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad.