BS EN 10263-3-2001

冷加工和冷挤压的钢棒、棍和线 第3部分:一般交货技术条件 表面硬化钢

Walzdraht,Staebe und Draht aus Kaltstauch-und Kaltfliesspressstaehlen. Technische Lieferbedingungen fuer Einsatzstaehle Steel Rod,Bars and Wire for Cold Heading and Cold Extrusion-Part 3:Technical Deli...

适用范围：1 This part of EN 10263 is applicable to round rod, round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion a...

实施日期：2001-08-15

BS M 32-1969

Specification for dimensions of aircraft accessory drives and mounting pads

DIN 6391-1990

夹具1:10锥度夹头用锥杆卡盘

Chucks with taper shank 7/24 for collets for tool holder with taper 1:10

UL 2017-2008

UL Standard for Safety General-Purpose Signaling Devices and Systems Second Edition; Reprint with Revisions Through and Including October 13, 2009

发布日期：2008-12-23  实施日期：2008-12-23

NF L21-414-1996

Aerospace series. Rivets, solid, universal head, in heat resisting nickel base alloy ni-P11, cadmium plated, inch based series.

DIN 8583-2-2003

压力成形加工工艺 第2部分:轧制 分类、细目、概念

Manufacturing processes forming under compressive conditions - Part 2: Rolling; Classification, subdivision, terms and definitions

适用范围：Rolling which is a group of forming under compressive conditions is integrated into the system of manufacturing processes and subdivided into individual processes. The individual processes belonging to...

DIN EN ISO 7225-2008

Gas cylinders - Precautionary labels (ISO 7225:2005)

实施日期：2008-02-01

EN 3307-1996

Aerospace Series. Screws,Pan Head,Offset Cruciform Recess,Threaded to Head,in Titanium Alloy,Anodized,MoS2 Lubricated. Classification:1 100 MPa (at Ambient Temperature)/315 Degrees C

实施日期：1996-09-01

GB/T 7353-1987

工业自动化仪表盘基本尺寸及型式

Basic dimensions and types of panels for industrial process measurement and control instrument

NF L55-050-050-2010

Aerospace series - Lamps, incandescent - Part 050 : lamp, code 1064 - Product standard.

DL/T 688-1999

电力系统远方跳闸信号传输装置

Intertripping equipment for power system

适用范围：本标准规定了电力系统保护装置(即继电保护装置和安全自动装置)使用的远方跳闸信号传输装置的定义、分类、要求、试验方法及检验规则等。本标准适用于采用专用电力线载波通道、专用光纤通道,以及以音频或数字接口方式通过通信...

实施日期：2000-07-01

BS EN 50324-3-2002

陶瓷材料和元件的压电性能.测量方法.高功率

Piezoelektrische Eigenschaften von keramischen Werkstoffen und Komponenten. Messverfahren. Grosssignal Piezoelectric properties of ceramic materials and components Part 3:Methods of measurement High po...

适用范围：This European Standard relates to piezoelectric transducer ceramics for power applicationover a wide frequency range both as electromechanical or mechanoelectrical converters.This standard covers the l...

实施日期：2002-10-10

NF E22-393-2-2004

Rolling bearings - Linear motion rolling bearings - Part 2 : static load ratings.

DIN CLC/TS 50136-7-2005

报警装置 报警信号传递系统和设备 第7部分:应用指南

Alarm systems - Alarm transmission systems and equipment - Part 7: Application guidelines

实施日期：2005-07-01

IEC 60601-1-10-2007

医用电气设备 第1-10部分:基本安全和基本性能通用要求 并列标准:生理闭环控制器研制的要求

Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers

适用范围：Specifies requirements for the development (analysis, design, verification and validation) of a physiologic closed-loop controller (PCLC) as part of a physiologic closed-loop control system (PCLCS) in ...

发布日期：2007-11-21  实施日期：2007-11-21

NF C93-537-3-1-2001

Communication cables - Specifications for test methods - Part 3-1 : mechanical test methods - General requirements.

DIN EN 60679-1-2008

Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification

实施日期：2008-02-01

NF C90-201-1-2002

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1 : general requirements, frequency bands and electromagnetic disturbances.

DIN EN ISO 10512-1998

通用扭矩型六角螺母(带非金属垫圈).1型.米制细牙螺纹、性能类别6、8和10

Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:1997); German version EN ISO 10512:1997

适用范围：The document contains dimensional and technical requirements of prevailing torque type hexagon nuts (with non-metallic inserts) with metric fine pitch thread and specifies their designation.

DIN EN 2467-2008

Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0, 4 mm≤a≤20 mm - 520 MPa≤Rm≤670 MPa

实施日期：2008-10-01