YS/T 458-2012

交通运输装备用铝合金焊接丝材

Aluminum alloy welding wires for transportation vehicles

适用范围：本标准规定了交通运输装备用铝合金配用焊丝的要求、试验方法、检验规则和标志、包装、运输、贮存及质量证明书与订货单（或合同）内容。本标准适用于交通运输装备用铝合金配用焊丝。

发布日期：2012-12-28  实施日期：2013-06-01

BS 2HR 51-2010

Specification for high expansion heat-resisting steel billets,bars,forgings and parts (Ni 25.5,Cr 15,Ti 2,Mn 1.5,Mo 1.25,Si 0.7,V 0.3) (Solution treated at 980 Degree C)

实施日期：2010-01-31

EN 611-1-1995

锡和锡合金.白蜡(锡基合金)

Tin and Tin Alloys. Pewter and Pewterware. Part 1:Pewter

实施日期：1995-01-01

EN 14937-1-2006

Copper and copper alloys. Determination of antimony content. Part 1:Spectrophotometric method

实施日期：2006-06-01

NF E25-801-2-2005

High-strength structural bolting assemblies for preloading - Part 2 : suitability test for preloading.

JIS T6112-1995

牙科用汞

Dental mercury

适用范围：この規格は，歯科用アマルガム用合金の練和に用いる水銀にーついて規定する。

BS EN 3379-1996

镀银耐热镍基合金NI-P101HT(沃斯帕洛尹合金)制中长螺纹紧公差柄双六角头增高螺栓.等级:1210 MPa(室温)/730℃

Zwoelfkant-Passschrauben,mittlere Gewindelaenge,aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy),fuer hohe Muttern. Klasse:1210 MPa (bei Raumtemperatur)/730°C Bolts,Double Hexagon Head,Clos...

适用范围：This standard specifies the characteristics of double hexagon headed bolts with close tolerance shank and medium length thread, in NI-P101HT, for increased height nuts, for aerospace applications. Clas...

实施日期：1996-01-01

QJ 3072A-2011

铝合金铸件补焊工艺技术要求

Technological requirements for repair welding for aluminium alloy castings

适用范围：本标准规定了铝合金铸件缺陷补焊的一般要求、补焊工艺、补焊质量要求及检验要求等。 本标准适用于航天产品用铝合金铸件缺陷补焊工艺文件编制。

发布日期：2011-07-19  实施日期：2011-10-01

DIN EN 3931-1998

航空和航天.镍基合金NI-B31001制,铜焊用填充带

Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing, tape; German version EN 3931:1998

DIN EN 755-5-2008

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form

实施日期：2008-06-01

DIN EN 604-2-1997

铝和铝合金.铸锻件.第2部分:尺寸和形位公差

Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form; German version EN 604-2:1997

适用范围：This document specifies the tolerances on dimensions and form of cast aluminium and aluminium alloy forging stock for general engineering applications.

ASTM E1771-2007

测定阳极铜和泡铜中铜含量的试验方法

Standard Test Method for Determination of Copper in Anode and Blister Copper

适用范围：<p id="s00009">This test method for the determination of copper in anode (99.0 to 99.8 %) and blister copper (92.0 to 98.0 %) is primarily intended as a referee method, to test such materials for compl...

实施日期：2007-02-01

EN 2413-1995

Aerospace Series. Bolts,Shouldered,Thin Hexagonal Head,Close Tolerance Shank,Short Thread,in Alloy Steel,Cadmium Plated. Classification:1 100 MPa (at Ambient Temperature)/235 Degrees C

实施日期：1995-01-01

ISO 19959-2005

熔模铸件表面条件的视检 钢、镍合金和钴合金

Visual examination of the surface condition of investment castings -- Steel, nickel alloys and cobalt alloys

适用范围：ISO 19959:2005 specifies the acceptance criteria for the surface inspection of steel, nickel alloy and cobalt alloy investment castings by visual examination.

发布日期：2005-04-01  实施日期：2005-04-01

BS EN 13920-11-2003

铝和铝合金 废料 第11部分:含铝铜散热器的废料

Aluminium und Aluminiumlegierungen. Schrott. Schrott aus Aluminium-Kupfer-Kuehlern Aluminium and aluminium alloys Scrap Part 11:Scrap consisting of aluminium-copper radiators Aluminium et alliages d'al...

适用范围：This European Standard specifies characteristics and chemical composition of scrap consisting of aluminium-copper radiators with a copper content sufficiently high to allow its use as alloying material...

实施日期：2003-05-06

ASTM A490-2010a

经热处理的最小抗拉强度为150 ksi的合金钢结构螺栓规格

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

适用范围：<p id="s00002">1.1 This specification covers two types of quenched and tempered, alloy steel, heavy hex structural bolts having a tensile strength of 150 to 173 ksi.</p> <p id="s00006">1.2 These bolts ...

YS/T 95-1996

空调器散热片用铝箔

实施日期：1997-12-01

BS EN 4183-2001

钛合金管连接件8°30' 90°弯头焊接端头

Luft-und Raumfahrt. Rohrverschraubung 8 0' aus Titanlegierung. Winkelverschraubungen 90 mit Anschweissenden Pipe Coupling 8 Degrees 30' in Titanium Alloy-Elbows 90 Degree Welded Ends Serie aerospatiale...

适用范围：This standard specifies the characteristics of elbows 90° welded ends, for pipe couplings 8°30′, in titanium alloy, for aerospace applications. Nominal pressure: up to 28 000 kPa Temperature range: - ...

实施日期：2001-11-15

BS 1748-6-1960

铜合金分析方法.第6部分:铜合金中锡的测定方法(镍线圈还原法)

Methods for the analysis of copper alloys. Method for the determination of tin in copper alloys (nickel coil reduction method)

适用范围：Reagents, sampling, test procedure for alloys with tin content 1.0 to 14.0 per cent. Applicable to phosphor bronze and gun metals.

ISO 7530-5-1990

镍合金 火焰原子吸收光谱法 第5部分:铁含量测定

Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 5: Determination of iron content

适用范围：The method is applicable to iron contents between 0,01 and 4 % (m/m). The general requirements concerning the apparatus, sampling, dissolution of the test sample, atomic absorption measurements, calcul...

发布日期：1990-12-01  实施日期：1990-12-01