NF H44-033-1986

气雾剂发生器 玻璃容器 １３毫米瓶口尺寸

Aerosols dispensers. Glass containers. Dimensions of finish 13 mm.

DIN 4983-2004

矩形杆刀夹和转位刀架 标记结构

Tool holders with rectangular shank and cartridges for indexable inserts - Presentation of the designation

适用范围：The specifications of this standard apply to the designation of standardized and non-standardized tool holders with rectangular shank and of cartridges intended for the mounting of indexable inserts ma...

NF E25-801-2-2005

High-strength structural bolting assemblies for preloading - Part 2 : suitability test for preloading.

DIN EN 3660-063-2010

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self locking for EN 3645 - Product standard; German and English version EN 3660-063:2009

实施日期：2010-10-01

DIN EN ISO 2320-2009

有效力矩型钢螺母 机械和工作性能

Prevailing torque type steel nuts - Mechanical and performance properties

适用范围：This International Standard specifies the mechanical and performance properties for prevailing torque typesteel nuts when tested at an ambient temperature range of +10 ~C to +35 ~C. It includes a singl...

实施日期：2009-03-01

BS EN ISO 8752-2009

弹簧型开口直销.重负荷槽头式

Spannstifte (-hülsen). Geschlitzt,schwere Ausführung Spring-type straight pins. Slotted,heavy duty Goupilles cylindriques creuses,dites goupilles élastiques Série épaisse

适用范围：This International Standard specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, heavy duty, with nominal diameter, d1, fro...

实施日期：2009-07-31

BS EN ISO 20127-2005

Zahnheilkunde. Physikalische Eigenschaften von elektrischen Zahnbuersten Dentistry Powered toothbrushes General requirements and test methods Art dentaire. Brosses a dents electriques. Exigences generales et methodes d'essai

实施日期：2005-11-02

DIN EN ISO 4628-5-2004

色漆和清漆 漆膜降解的评定 一般性缺陷程度,量值和大小及均匀变化程度的规定 第５部分:剥落等级的评定

Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking ...

适用范围：This part of ISO 4628 specifies a method for assessing the degree of flaking of coatings by comparison with pictorial standards and using the designation system defined in ISO 4628-1.

EN 4355-2008

Aerospace series. Six lobe recess. Drivers,socket

实施日期：2008-03-01

BS EN 3379-1996

镀银耐热镍基合金NI-P101HT(沃斯帕洛尹合金)制中长螺纹紧公差柄双六角头增高螺栓.等级:1210 MPa(室温)/730℃

Zwoelfkant-Passschrauben,mittlere Gewindelaenge,aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy),fuer hohe Muttern. Klasse:1210 MPa (bei Raumtemperatur)/730°C Bolts,Double Hexagon Head,Clos...

适用范围：This standard specifies the characteristics of double hexagon headed bolts with close tolerance shank and medium length thread, in NI-P101HT, for increased height nuts, for aerospace applications. Clas...

实施日期：1996-01-01

GB/T 7353-1999

工业自动化仪表盘、柜、台、箱

Panel,cabinet,console and case for industrial-process measurement and control equipment

适用范围：本标准规定了工业自动化仪表盘、柜、台、箱的型式、基本尺寸、安装尺寸、技术要求、实验方法、检验规则、标志等。　 本标准适用于工业生产过程自动控制装置中各类工业自动化仪表盘、柜、台、箱，其他自动控制装置中的仪表盘、柜、台、箱...

发布日期：1999-11-11  实施日期：2000-05-01

DIN EN 3931-1998

航空和航天.镍基合金NI-B31001制,铜焊用填充带

Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing, tape; German version EN 3931:1998

NF A36-231-2-2013

Hote-rolled flat products made of high yield strength steels for cold forming - Part 2 : technical delivery conditions for thermomechanically rolled steels

DIN EN 12560-7-2004

法兰及接头 等级命名法兰的垫圈尺寸 第7部分:钢法兰的盖金属套垫圈

VFlanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges

适用范围：This standard specifies dimensions, types, design, materials and marking requirements of covered metal jacketed gaskets.#,,#

NF L22-535-1975

埋头自锁紧系留螺母 单耳单孔 米制螺纹

Self-locking anchor nuts, countersunk type, single lug with one hole. Sim thread (rech.).

实施日期：1975-06-01

EN 2413-1995

Aerospace Series. Bolts,Shouldered,Thin Hexagonal Head,Close Tolerance Shank,Short Thread,in Alloy Steel,Cadmium Plated. Classification:1 100 MPa (at Ambient Temperature)/235 Degrees C

实施日期：1995-01-01

NF T31-012-1972

铬酸钡基颜料

Barium chromate pigments.

实施日期：1972-09-01

BS ISO 9448-9-2013

冲压工具 导套 2型B形普通滚珠导套

Tools for pressing. Guide bushes. Form B,ball cage bushes,plain,type 2

发布日期：2014-01-31  实施日期：2014-01-31

DIN EN 1113-2011

Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification; German version EN 1113:2008+A1:2011

DIN 95367-1998

弹性构件.屋顶构件,A型和B型

Elastomer mounts - Roof mounts, types A and B

适用范围：The document applies to elastomer mounts, types roof mounts to be used at ambient temperatures of -30 ?to 70 ?#,,#