NF R16-301-1944

化油器 两孔椭圆形凸缘

Carburetors. Oval flanges with two holes.

GB/T 13337.2-1991

固定型防酸式铅酸蓄电池 规格及尺寸

Stationary acidspray-proof lead-acid batteries--Capacity specifications and size

适用范围：本标准规定了固定型防酸式铅酸蓄电池(以下简称蓄电池)的第Ⅰ、第Ⅱ、第Ⅲ 、第Ⅳ四种系列，规定了蓄电池的容量规格及最大外形尺寸。　　本标准适用于开关控制、信号系统、电信装置、计算机、事故照明以及各种直流电源用蓄电池，不适用...

发布日期：1991-12-14  实施日期：1992-06-01

NF C93-112-19-2006

Fixed capacitors for use in electronic equipment - Part 19 : sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors.

BS ISO 7790-1997

液压传动.规格为03和05型的四油口标准设计叠阀和四油口定向控制阀.紧固尺寸

Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions

适用范围：This International Standard specifies clamping dimensions of four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05, on mounting surfaces. The dimensions and sizes...

实施日期：1998-03-15

NF P98-870-1-2005

Concrete pavements - Part 1 : mat俽ials.

GB/T 10188-1988

电子设备用固定电容器 第13部分:分规范:金属箔式聚丙烯膜介质直流固定电容器

Fixed capacitors for use in electronic equipment--Part 13:Sectional specification--Fixed polypropylene film dielectric metal foil d.c. capacitors

适用范围：本标准适用于电子设备用的具有以聚丙烯膜作为介质、并以薄金属箔作电极的直流固定电容器。无线电干扰抑制用的电容器不包括在本标准中。而包括在IEC 384-14《电子设备用固定电容器，第14部分:分规范:无线电干扰抑制用固定电...

发布日期：1988-12-22  实施日期：1989-07-31

GB/T 4127.15-2007

固结磨具 尺寸 第15部分：固定式或移动式切割机用切割砂轮

Bonded abrasive products - Dimensions - Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines

适用范围：GB/T 4127的本部分规定了以下固结磨具的尺寸、标记和要求，单位为毫米：　　——41型：平形切割砂轮；　　——42型：钹形切割砂轮。　　本部分规定的固结磨具适用于对工件的任意部位切割或开槽。工件牢固定位或由其自身重量固定。若切割砂...

发布日期：2007-06-25  实施日期：2007-11-01

BS EN 60335-2-51-2003+A1-2008

Household and similar electrical appliances. Safety. Particular requirements for stationary circulation pumps for heating and service water installations

实施日期：2003-07-24

NF R19-110-1-1994

Lashing and securing arrangements on road vehicles for sea transportation on ro/ro ships. General requirements. Part 1 : commercial vehicles and combinations of vehicles, semi-trailers excluded.

DIN EN 14067-3-2003

铁路应用 空气动力 第3部分:涵洞的空气动力

Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels

适用范围：This European Standard describes physical phenomena of railway-specific aerodynamics and gives recommendations for the documentation of tests.

DIN V 65900-17-2001

航空航天系列.O形环槽.O形环槽设计准则.基本计算

Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000)

适用范围：The document provides: the design criteria recommended for the housing definition for o-rings as specified in ISO 3601-1; a calculation method to formulate dimensions of the housing for which the near ...

DIN 12894-1997

金属实验室仪器.夹具

Metal laboratory ware - Clamps

适用范围：The document defines dimensions, materials and design for clamps used to fit laboratory devices at tripods.#,,#

NF C61-670-1-2005

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1 : general requirements.

IEC 60384-18-2-2007

电子设备用固定电容器 第18-2部分:空白详细规范:非固体电解质片状铝电解固定电容器 评定水平E

Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ

适用范围：IEC 60384-18-2:2007 is a blank detail specification and is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specificatio...

发布日期：2007-03-12  实施日期：2007-03-12

GB/T 22163-2008

腧穴定位图

Illustrations for location of acupuncture Points

适用范围：本标准规定了根据GB/T 12346-2006确定的腧穴定位图。　　本标准与GB/T 12346-2006配套使用。

发布日期：2008-07-02  实施日期：2008-11-01

DIN EN 14015-2005

环境温度和高温下液体储存用现场加工、地面立式柱形焊接平底钢罐的设计与制作

Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above

适用范围：This European Standard specifies the requirements for the materials, design, fabrication, erection, testing and inspection of site built, vertical, cylindrical, flat bottomed, above ground, welded, ste...

NF E85-001/A1-2010

Safety of machinery - Permanent means of access to machinery - Part 1 : choice of fixed means of access between two levels - Amendment 1.

DIN EN 2602-2007

Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2602:2005

实施日期：2007-04-01

BS 8000-11-2011

Workmanship on building sites. Part 11:Internal and external wall and floor tiling. Ceramic and agglomerated stone tiles,natural stone and terrazzo tiles and slabs,and mosaics. Code of practice

实施日期：2011-01-31

YD/T 1231-2002

固定网交换机呼叫转接业务技术规范