DIN 20036-1990

软管管接头.圆螺纹的管接头套管

Hose fittings; coupling nipples with round thread form

适用范围：This standard fixes the dimensions of coupling nipples which in mining are used to connect up hoses as per DIN 20018 part 1 to part 3 and DIN 20022 part 2 being armed with hose fittings as per DIN 2003...

DIN 12216-1975

玻璃实验仪器 带圆螺纹的玻璃管端

Laboratory glassware; glass tube ends with round thread

适用范围：Laboratory glassware; glass tube ends with round thread Verrerie de laboratorie; embouts de tuyaux en verre, à filet rond

DIN 7271-1965

贮油器的油位指示器用螺旋环

Screw ring for oil containers

适用范围：Screw ring for oil containers

DIN 20400-1990

大承载深度的圆螺纹

Knuckle threads for the mining; threads with large load-bearing depth

适用范围：Threads as per this standard are used in underground mining. They are designed for lowest-possible unit pressure and highest-possible safety against corrosion.

DIN 5606-2-1975

铁路车辆用工件上的螺纹检验. 圆螺纹、梯形螺纹、圆梯形螺纹

Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread

适用范围：Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme threadContr?le des filets sur les pièces à usiner pour véhicules ferroviaires; filet arrondi, filet trapéz...

CNS 4325-1978

退刀及凹槽(适用于公制梯形、锯齿形、圆顶螺纹以及其他具有粗螺距之螺纹)

Rundut and Undercut for Metric Trapezoidal Screw Threads, Knuckle Screw Threads, Bultress Screw Threads and Other Screw Threads of Coarse Pitches

发布日期：1978-03-21  实施日期：1978-03-21

DIN 7272-1965

贮油器用螺纹管件

Screw necks for oil containers

适用范围：Screw necks for oil containers

DIN 20367-2010

Rock drilling - Round screw connections for rotary drilling equipment - Dimensions, design

实施日期：2010-04-01

CNS 4370-1978

圆螺纹(具有间隙浅螺腹、螺距为7mm之限界尺寸和偏差螺纹量规之公差和许可磨损)

Round Thread with Clearance and Flat Flank with Pitch 7mm (Limits of Size and Deviation--Tolerances and Permissible Wear of Thread Gauges)

发布日期：1978-05-31  实施日期：1978-05-31

CNS 508-1978

圆螺纹(螺纹轮廓基本尺寸)

Knuckle Thread (Profiles, Nominal Sizes)

发布日期：1955-09-24  实施日期：1978-05-31

SY/T 6418-1999

内压和弯曲复合作用下圆螺纹套管的连接性能

Round thread casing joint strength with combined internal pressure and bending

实施日期：1999-12-01

CNS 4371-1978

圆螺纹(具有间隙、深螺腹、螺距为7mm之理论值)

Round Thread with Clearance and Steep Flank with Pitch 7 mm Theoretic Values

发布日期：1978-05-31  实施日期：1978-05-31

DIN 7273-1-1970

厚度0.5mm 以下钢板零件及其旋紧附件用圆螺纹. 尺寸, 公差

Knuckle Threads for Steel Sheet Pieces up to 0.5 mm Thickness and Appropriated Couplings; Dimensions, Tolerances

适用范围：Knuckle threads for steel sheet pieces up to 0,5 mm thickness and appropriated couplings; sizes and tolerances

DIN 405-1-1997

通用圆螺纹.第1部分:剖面、公称尺寸

General purpose knuckle threads - Part 1: Profiles, nominal sizes

适用范围：The document defines profiles, nominal sizes for external threads and internal threads.#,,#

DIN 7270-1965

贮油器用螺旋盖

Screw caps for oil containers

适用范围：Screw caps for oil containers

DIN 168-1-1998

圆螺纹.第1部分:玻璃容器用螺纹

Knuckle threads - Part 1: Especially for glass containers; thread sizes

适用范围：The threads specified in this document are preferably applicable for packaging made of glass.

DIN 405-2-1997

通用圆螺纹.第2部分:偏差和公差

General purpose knuckle threads - Part 2: Deviations and tolerances

CNS 509-1955

圆螺纹(防毒面具类用)

Knuckle Thread for Poison Gas Mask

实施日期：1955-09-24

JJF 1108-2003

石油钻具接头螺纹工具量规、圆螺纹套管工具量规和油管螺纹工具量规校准规范

实施日期：2003-12-23

DIN 30389-2007

Hexagon and castle nuts with knuckle thread - For motive power units turnbuckles and drawbars

实施日期：2007-06-01