BS ISO 368-2006

准备纺纱机、纺纱机和并线(捻线)机.环锭纺纱、并线用筒管

Spinning preparatory, spinning and doubling (twisting) machinery. Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64

适用范围：This International Standard specifies the dimensions (length and inner diameter) and permissible total run-outof tubes with taper 1:38 and 1:64 for ring-spinning, doubling and twisting spindles used in...

NF B35-021-2012

Laboratory glassware - Filter flasks.

BS 6898-1987

一般实验室用玻璃离心试管规范

Zentrifugenglaeser fuer den allgemeinen Gebrauch im Laboratorium Glass Centrifuge Tubes for General Laboratory Use Tubes centrifuges en verre pour usages generaux en laboratoires. S pecifications

适用范围：Dimensional and constructional requirements for five sizes (6,9,13, 25 and 40 mL) of round-bottom and conical bottom glass centrifuge tubes which will withstand an acceleration of up to 35 ,000 m/s<UP>...

实施日期：1987-01-01

NF C31-094-2-1995

Packaging of winding wires. Part 4 : methods of test. Section 2 : containers made from thermoplastic material for taper barrelled delivery spools.

NF E62-105-1997

机床--车床顶尖--互换性尺寸

Machine tools. Lathe centres. Sizes for interchangeability.

ISO 383-1976

实验室玻璃器皿 互换性锥形磨接口

Laboratory glassware -- Interchangeable conical ground joints

适用范围：The requirements deal with four series of conial ground joints. The conicity, the great diameter and the length of the ground joint including the tolerances are specified and tabled. In addition the su...

发布日期：1976-08-01  实施日期：1976-08-01

BS 572-1985

Specification for interchangeable conical ground glass joints

实施日期：1985-02-28

EN 13026-2001

Packaging. Light-Gauge Metal Packaging. Nominal Filling Volumes for Non-Round,Cylindrical and Tapered General Use Metal Containers up to 30 000 ml

实施日期：2001-01-01

IEC 60264-3-2-1999

绕组线的包装 第3-2部分:圆锥形筒装交货线盘 热塑性材料可回收线盘规范

Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials

适用范围：Specifies the requirements for returnable taper barrelled delivery spools made from thermoplastic material.

发布日期：1999-04-28  实施日期：1999-04-28

DIN EN 4124-2006

Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60°swage - Classification: 1210 MPa (at ambient temperature) /730℃

实施日期：2006-11-01

NF C31-093-4-2001

Packaging of winding wires - Part 3-4 : taper barelled delivery spools - Dimensions of containers for taper barelled delivery spools.

EN 60264-3-2-1999

Packaging of Winding Wires Part 3-2: Taper Barrelled Delivery Spools - Specification for Returnable Spools Made from Thermoplastic Materials IEC 60264-3-2:1999

ISO 298-1973

机床. 车床顶尖 互换型尺寸

Machine tools -- Lathe centres -- Sizes for interchangeability

适用范围：The scope should not be regarded as restricted to lathes only, but may be extended to all the other machine tools with centres of the same type. Specifies designation and sizes in millimetres and in in...

发布日期：1973-12-01  实施日期：1973-12-01

BS 5404-3-1977

塑料实验室容器规范.第3部分:滤液漏斗

Specification for plastics laboratory ware. Filter funnels

适用范围：6 preferred sizes of funnel suitable for the 8 sizes of filter paper (55 mm to 240 mm) currently available in Europe. The funnels are for use with aqueous solutions between 0<deg>C and 60<deg>C but not...

实施日期：1977-09-30

NF H34-067-2008

Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering.

DIN 69864-1988

移动式砂轮机的双面锥形夹紧法兰 尺寸

Hub flanges for double conical grinding wheels for portable grinding machines; dimensions

适用范围：The hub flanges specifies in the standard apply to means for double conical grinding wheels according to DIN 69147 part 1 for portable grinding machines.

BS EN 4124-2004

耐热镍合金NI-PH-1302 (Waspaloy) 螺纹镀银 自锁带柄螺母 60度模锻 等级:1210MPa(大气温度)/730℃

Luft-und Raumfahrt. Einnietmuttern,selbstsichernd,aus hochwarmfester Nickelbasislegierung NI-PH1302 (Waspaloy),Gewinde versilbert,fuer 60 Aufweitung. Klasse. 1 210 MPa (bei Raumtemperatur) / 730°C Shan...

适用范围：This standard specifies the characteristics of self-locking shank nuts in NI-PH1302, silver plated on thread, for use in 60° cone holes, for aerospace applications. Classification: 1 210 MPa <up1)> / 7...

实施日期：2004-12-16

ISO 15245-1-2001

气缸 连接阀门与气缸的平行线 第1部分:说明书

Gas cylinders. Parallel threads for connection of valves to gas cylinders. Part 1:Specification first edition

适用范围：This part of ISO 15245 specifies definitions, dimensions and tolerances of parallel screw threads of nominal diameter 30 mm (designated 30P), 25 mm (designated 25P) and 18 mm (designated 18P), for the ...

实施日期：2001-10-15

BS 978-3-1952

小节距齿轮.第3部分:伞齿轮

Zahnraeder fuer Instrumente und Uhrwerkmechanismen. Kegelzahnraeder Gears for instruments and clockwork mechanisms-Part 3:Bevel gears Engrenages pour instruments et mecanismes d'horlogerie. Engrenages ...

适用范围：Form, proportions of machine cut conical gears connecting intersecting shafts in pitch range 20 to 80 D.P. Straight or curved teeth with normal pressure angle 20 at pitch cone. Addendum modification, p...

实施日期：1952-01-24

DIN 71412-1987

锥形注油嘴

Lubricating nipples; cone type

适用范围：The lubricating nipple cone type exist in 3 forms and suitable for to grease of grease-guns by handcraft or engine-power. The thread in normally realization to be the taper external thread. This standa...