DIN EN ISO 15978-2003

带心轴和沉头的开口端铆钉 AIA/St (ISO 15978:2002)

Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002)

BS EN 2653-1997

钝化耐蚀钢制头部加螺纹的100°标准埋头有槽螺钉.等级:600MPa(室温)/425℃

100 Senkschrauben mit Schlitz,Gewinde annaehernd bis Kopf,aus korrosionsbestaendigem Stahl,passiviert. Klasse:600 MPa (bei Raumtemperatur) /425°C Screws,100 Degree Countersunk Normal Head,Slotted,Threa...

实施日期：1997-01-15

GB/T 1015-1986

沉头半空心铆钉

Countersunk head semi-tubular rivets

发布日期：1986-07-01  实施日期：1987-05-31

GB/T 846-1985

十字槽沉头自攻螺钉

Cross recessed countersunk head tapping screws

发布日期：1985-08-01  实施日期：1986-05-31

NF L24-149-2010

Aerospace series - Bolts, 100 o countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification : 1 100 MPa (at ambient temperature)/425 oC.

NF E25-714-2003

Open end blind rivets with break pull mandrel and protruding head - AIA/St.

DIN 65495-202-1990

航空和宇航;沉头铆接静负荷下设计值,单剪,扎制,铆钉材料3.1324,米制系列

Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3.1324, metric series

DIN 29735-6-1989

航空和航天. 嵌入式NAS1399D沉头盲铆钉在静负荷下的铆接计算值

Aerospace; rivet design values static load, for blind rivets according to NAS 1399D with countersunk head, single shear

DIN 29735-4-1984

航空和航天.嵌入式沉头盲铆钉在静负荷下的铆接计算值

Aerospace; rivet calculation values, static load, for blind rivets with countersunk head, single shear

DIN 65495-402-1990

航空和宇航;沉头铆接静负荷下设计值,双剪,扎制,铆钉材料3.1324,米制系列

Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3.1324, metric series

BS EN 3304-1997

MoS2润滑的阳极氧化钛合金制短螺纹紧公差标准柄翼型十字槽小于100°的埋头螺钉.等级:1100 MPa(室温)/315℃

100 Senk-Passschrauben mit kleinem Kopf,mit Fluegelkreuzschlitz,kurzes Gewinde,aus Titanlegierung,anodisiert MoS2 geschmiert. Klasse:1100 MPa (bei Raumtemperatur)/315°C Screws,100 Degrees Countersunk R...

实施日期：1997-02-15

NF L21-213-1980

铝合金制１２０°埋头铆钉

120 degrees countersunk head rivets in aluminium alloys (rech.).

实施日期：1980-03-01

EN 2550-1992

Aerospace Series. Rivets,Solid,100 Degrees Normal Countersunk Head,in Aluminium 1050A,Inch Based Series

实施日期：1992-01-01

EN ISO 14587-2011

Hexalobular socket raised countersunk (oval) head tapping screws

实施日期：2011-02-01

EN ISO 15974-2000

Closed End Blind Rivets with Break Pull Mandrel and Countersunk Head. AIA/St ISO 15974:2000

实施日期：2000-12-01

BS 57-1951

用质量控制图法与累积和技术的过程控制指南

B.A.-Schrauben,Bolzen und Muttern. Spezifikation Specification for B.A. Screws bolts and nuts Specification. Vis,boulons et ecrous B.A. AMD 4329:October 1961;AMD 5901:August 1966;AMD 1528:August 1974

实施日期：1951-03-31

DIN EN ISO 15975-2003

带心轴和凸头的抽心铆钉;AI/AIA (ISO 15975:2002)

Closed end blind rivets with break pull mandrel and protruding head; Al/AlA (ISO 15975:2002)

DIN 9118-1-1987

航空和宇航;铆钉孔

Aerospace; rivet holes

DIN EN 4509-2007

Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315 ℃

实施日期：2007-05-01

EN 27721-1991

Countersunk Head Screws. Head Configuration and Gauging

实施日期：1991-01-01