DIN ISO 2768-2-1991

通用公差.第2部分:未标注专用公差的功能部件用形位公差; 等同采用 ISO 2768-2:1989

General tolerances; geometrical tolerances for features without individual tolerances indications; identical with ISO 2768-2:1989

BS EN ISO 286-2-2010

Geometrische Produktspezifikation (GPS). ISO-Toleranzsystem für L?ngenma?e. Tabellen der Grundtoleranzgrade und Grenzabma?e für Bohrungen und Wellen Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Part 2:Tables of standard tolerance classes and limit deviations for holes and shafts Spécification géométrique des produits (GPS). Système de codification ISO pour les tolérances sur les tailles linéaires. Tableaux des classes de tolérance normalisées et des éc

实施日期：2010-07-31

NF E02-100-2-2010

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts.

NF E04-563-1-2011

Geometrical Product Specification (GPS) - Dimensional tolerancing - Part 1 : linear sizes.

ISO 2768-2-1989

一般公差.第2部分:未注公差的要素的几何公差

General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications

适用范围：This part is intended to simplify drawing indications and specifies general tolerances in three tolerance classes. It mainly applies to features which are produced by removal of material. It contains t...

发布日期：1989-11-01  实施日期：1989-11-01

DIN ISO 2768-1-1991

一般公差.无单个公差表示的长度和角度公差

General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989

适用范围：The standard is intended to simplify drawing indications. It specifies general tolerances in 4 tolerance classes, which consider the respective customary workshop accuracy. The ISO 2768-1 is a revision...

ISO 2903-1993

ISO米制梯形螺纹 公差

ISO metric trapezoidal screw threads -- Tolerances

适用范围：Specifies a tolerance system for threads according to ISO 2902; the system does not apply to threads with special requirements on axial displacement (e.g. lead screws); gives the structure of the syste...

发布日期：1993-10-01  实施日期：1993-10-01

NF E02-350-2-1993

General tolerances. Part 2 : geometrical tolerances for features without individual tolerance indications.

NF E02-100-1-2010

Geometrical product specification (GPS) - ISO code system for tolerances of linear sizes - Part 1 : basis of tolerances, deviations and fits.

DIN 7172-1991

规格范围在 3150 mm - 10.000 mm 以上的公差和极限偏差.原则、标准公差和极限偏差

Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations

EN ISO 14405-1-2010

Geometrical product specifications (GPS). Dimensional tolerancing. Part 1:Linear sizes

实施日期：2010-12-01

CNS 4114-1991

建筑组件基本许可差

Basic Tolerances for Building Components

发布日期：1977-06-16  实施日期：1991-01-22

ISO 2768-1-1989

一般公差.第1部分:未注公差的线性和角度尺寸的公差

General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications

适用范围：This part is intended to simplify drawing indications and specifies general tolerances in four tolerance classes. It applies to the dimensions of workpieces that are produced by metal removal or are fo...

发布日期：1989-11-01  实施日期：1989-11-01

JIS A0003-1999

建筑公差

Tolerances for building

适用范围：この規格は，建築構成材及び建築構法の寸法仕様における公差を選定するための数値のシりーズについて規定する。

ISO 286-2-2010

产品几何量技术规范(GPS) 线性尺寸公差的ISO编码系统 第2部分:孔和轴的标准公差等级和极限偏差表

Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

适用范围：ISO 286-2:2010 gives values of the limit deviations for commonly used tolerance classes for holes and shafts calculated from the tables given in ISO 286?1. ISO 286-2 covers values for the upper limit d...

发布日期：2010-06-01  实施日期：2010-06-01

ISO 286-1-2010

产品几何量技术规范(GPS) 线性尺寸公差的ISO编码系统 第1部分:公差、偏差和配合的基础

Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits

适用范围：ISO 286-1:2010 establishes the ISO code system for tolerances to be used for linear sizes of features of the following types: a) cylinder; b) two parallel opposite surfaces. ISO 286-1:2010 defines the ...

发布日期：2010-04-01  实施日期：2010-04-01

DIN EN ISO 14405-1-2011

Geometrical product specifications (GPS). Dimensional tolerancing. Part 1:Linear Sizes (ISO 14405-1:2010); German version EN ISO 14405-1:2010

ISO 14405-1-2010

产品几何量技术规范(GPS) 尺寸公差 第1部分:线性尺寸

Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes

适用范围：ISO 14405-1:2010 establishes the default specification operator for linear size and defines a number of special specification operators for linear size for feature of size types “cylinder” and “two par...

发布日期：2010-12-01  实施日期：2010-12-01