JIS K7013-1997

纤维增强塑料管

Fibre reinforced plastic pipes

DIN EN 61212-1-2007

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 61212-1:2006)

实施日期：2007-01-01

EN ISO 15875-3-2003

Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). Part 3:Fittings ISO 15875-3:2003

实施日期：2003-12-01

EN 61212-3-1-2006

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Part 3: Specifications for individual materials Sheet 1: Round laminated rolled tubes IEC 61212-3-1:2006

ISO 13260-2010

常压地下废水和污水用热塑性塑料管道系统 耐温度循环和外部负载的组合试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading

适用范围：ISO 13260:2010 specifies two methods for testing pipes and fittings or joints for plastics piping systems intended for use in underground drainage and sewerage systems for their resistance to deformati...

发布日期：2010-06-01  实施日期：2010-06-01

ISO 12230-2012

聚丁烯-1(PB-1)管材 时间和温度对预期强度的影响

Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength

适用范围：ISO12230:2012 specifies minimum values for the expected strength as a function of time and temperature in the form of reference lines and tabulated data, for use in calculations on pipes made of polybu...

发布日期：2012-06-01  实施日期：2012-06-01

BS EN ISO 22391-3-2009

Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Fittings

实施日期：2010-01-31

NF T54-937-2000

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection.

EN 13566-7-2007

Plastics piping systems for renovation of underground nonpressure drainage and sewerage networks. Part 7:Lining with spirally-wound pipes

实施日期：2007-03-01

SL/T 96.1-1994

喷灌用塑料管基本参数及技术条件-硬聚乙烯管

Technical parameters and requirement of plastic pipe for sprinkler irrigation-hard polyvinyl chloride pipe

适用范围：本标准规定了以聚氯乙烯树脂为主要原料,经挤出成型,主要用于地埋输送灌溉用水的硬聚氯乙烯管的基本参数、技术条件和检验规则。

发布日期：1994-12-02  实施日期：1995-01-01

ISO 8770-2003

建筑物内污废水排放(低温和高温)用塑料管系 聚乙烯(PE)

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polyethylene (PE)

适用范围：ISO 8770:2003 specifies the requirements for solid-wall polyethylene (PE) pipes and fittings for soil and waste discharge (low and high temperature) inside buildings, as well as the system itself. It d...

发布日期：2003-11-01  实施日期：2003-11-01

NF E86-605-2005

Thermoplastic and flexible metal pipework for underground installation at petrol filling stations.

DIN EN ISO 15876-1-2004

冷热水装置用塑料管道系统 聚丁烯(PB) 第1部分:总则

Plastics piping systems for hot and cold water Installations - Polybutylene (PB) - Part 1: General

适用范围：This Part of DIN EN ISO 15876 specifies the general aspects of polybutylene (PB) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water whe...

实施日期：2007-09-01

ISO 4427-5-2007

塑料管道系统 供水用聚乙烯管和配件 第5部分:系统的适用性

Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system

适用范围：ISO 4427-5:2007 specifies the characteristics of the fitness for purpose of assembled piping systems made from polyethylene (PE) intended for the conveyance of water for human consumption, including ra...

发布日期：2007-08-01  实施日期：2007-08-01

NF A48-880-2012

Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods.

EN ISO 1167-4-2007

Thermoplastics pipes,fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 4:Preparation of assemblies

实施日期：2007-11-01

NF T54-015-1997

塑料管道系统--热塑塑料阀--耐内压性能和密封性试验方法

Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness.

ISO 22391-2-2009

热水和冷水装置用塑料管道系统 耐热聚乙烯(PE-RT) 第2部分:管道

Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes

适用范围：ISO 22391-2:2009 specifies the characteristics of pipe made of polyethylene of raised temperature resistance (PE-RT), Type I and polyethylene of raised temperature resistance (PE-RT), Type II intended ...

发布日期：2009-12-01  实施日期：2009-12-01

ISO 3127-1994

热塑性塑料管--耐外冲击性的测定--时针旋转法

Thermoplastics pipes -- Determination of resistance to external blows -- Round-the-clock method

适用范围：Cancels and replaces the first edition (1980). Specifies a method for the determination of the resistance to external blows of thermoplastics pipes of circular cross-section (round-the-clock method). T...

发布日期：1994-12-01  实施日期：1994-12-01

DIN EN 1905-1999

塑料管系统.非增塑聚氯乙烯(PVC-U)管,管配件和材料.基于总氯含量的PVC含量的评定方法

Plastics piping systems - Unplastized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content; German version EN 1905:1998

适用范围：The doument specifies a method for assessing the poly(vinyl chloride) (PVC) content in reprocessable and recycable unplasticized (PVC-U) materials or in PVC-U products.