CJJ/T 29-2010

建筑排水塑料管道工程技术规程(附条文说明)

Technical specification for plastic pipeline for building drainage

适用范围：为使建筑排水塑料管道工程的设计、施工及验收，做到技术先进、安全适用、经济合理、确保工程质量，制定本规程。 本规程适用于建筑物高度不大于 100m 的新建、改建、扩建工业与民用建筑的生活排水、一般屋面雨水重力排水和家用空...

发布日期：2010-12-10  实施日期：2011-10-01

BS EN ISO 1452-1-2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U). General

实施日期：2010-01-31

EN ISO 15875-1-2003

Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). Part 1:General Incorporates Amendment A1:June 2007

实施日期：2003-12-01

BS EN 1716-1997

塑料管道系统.聚乙烯(PE)开孔三通件.安装好的开孔三通上抗冲击应力的检测方法

Kunststoff-Rohrleitungssysteme. Anbohr-T-Stuecke aus Polyethylen (PE). Pruefverfahren fuer die Widerstandsfaehigkeit gegen Schlagbeanspruchung eines montierten Anbohr-T-Stuecks Plastics Piping Systems-...

适用范围：This standard specifies a test method for the resistance to impact of polyethylene (PE) tapping tees. This standard is applicable to PE tapping tees intended for the transport of fluids.

实施日期：1997-06-15

DIN EN 12256-1998

塑料管系统.热塑管接头.机械强度和挠性的试验方法

Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings; German version EN 12256:1998

适用范围：The document specifies a method for testing the mechanical strength of flexibility of a fabricated thermoplastics fittings intended to be used in non-pressure underground applications.

SL 96-1994

喷灌用塑料管基本参数及技术条件 编制说明

Technical parameters and requirements of plastic pipe for sprinkler irrigation

发布日期：1994-12-02  实施日期：1995-01-01

DIN EN 15001-1-2011

Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations. Part 1:Detailed functional requirements for design,materials

DIN EN ISO 11295-2010

用于塑料管道系统更新修复的设计分类和信息

Classification and information on design of plastics piping systems used for renovation (ISO 11295:2010); German version EN ISO 11295:2010

实施日期：2010-08-01

BS EN 14364-2013

地下压力排水和排污水塑料管道系统 未饱和聚酯树脂(UP)玻璃纤维增强的热固性塑料(GRP) 管道、配件和连接件

Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes,fittings an...

发布日期：2013-03-31  实施日期：2013-03-31

EN ISO 13968-2008

塑料管道系统—热塑性塑料管材环的灵活性[取代测定：CEN EN 1446 ]

Plastics piping and ducting systems. Thermoplastics pipes. Determination of ring flexibility

发布日期：2008-10-01  实施日期：2008-10-01

DIN EN 1852-1-2009

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system

实施日期：2009-07-01

ISO 10639-2004

加压和无压力供水用塑料管道系统 不饱和聚酯(UP)基树脂的玻璃增强热固塑料(GRP)

Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

适用范围：ISO 10639:2004 specifies the properties of piping system components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) for water supply with or without pr...

发布日期：2004-02-01  实施日期：2004-02-01

DIN 53769-2-1986

玻璃加强塑料管道检验; 管道持久内压试验

Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test

适用范围：This standard specifies a test method for the determination of the long term behaviour of pipes made of glass fibre reinforced plastics (GRP) under constant hydrostatic internal pressure and constant t...

DIN EN ISO 11296-4-2011

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 4:Lining with cured-in-place pipes (ISO 11296-4:2009,corrected version 2010-06-01); German version EN ISO 11296-4:2011

NF T54-938-2-2013

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : pipes.

DIN EN 804-1994

塑料管道系统.压力管道用溶剂--水泥胶合接头的注模承窝配件

Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN...

适用范围：The document specifies a test method for checking the resistance of injection-moulded socket fittings for solvent-cemented joints for pressure piping systems to a short-term internal hydrostatic pressu...

EN 13476-2-2007

Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U),polypropylene (PP) and polyethylene (PE). Part 2:Specifications for pipes and fittings with smooth int

实施日期：2007-05-01

BS EN ISO 21003-5-2008

Mehrschichtverbund-Rohrleitungssysteme für die Warmund Kaltwasserinstallation innerhalb von Geb?uden. Gebrauchstauglichkeit des Systems Multilayer piping systems for hot and cold water installations inside buildings. Part 5:Fitness for purpose of the system Systèmes de canalisations multicouches pour installations d'eau chaude et froide. l'intérieur des b?timents. Aptitude. emploi du système

实施日期：2008-08-29

DIN EN 15632-3-2010

District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes - Requirements and test methods

实施日期：2010-06-01

ISO 2505-2005

热塑性塑料管 纵向回缩 试验方法和参数

Thermoplastics pipes -- Longitudinal reversion -- Test method and parameters

适用范围：ISO 2505:2005 specifies a method for determining the longitudinal reversion of thermoplastics pipes, to be carried out in either a liquid or in air. In case of dispute, heated liquid is used as the ref...

发布日期：2005-05-01  实施日期：2005-05-01