DIN 53766-1-1991

玻璃纤维增强塑料制仪器和容器的检验.粘接强度的测定

Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength

适用范围：This standard contains a test method, including the preparation of specimens, for the determination of the adhesive strength between the laminate and liner.

DIN EN 13421-2006

塑料 热固模塑料 复合材料和强化纤维 测定压模塑料各向异性用试样的制备

Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites

适用范围：This European Standard specifies a method for the preparation of specimens of compression moulding composites for determining the anisotropy induced by material flow. It is applicable to all SMC/BMC an...

实施日期：2006-05-01

NF C93-780-2-40-2013

Materials for printed boards and other interconnecting structures - Part 2-40 : reinforced base materials clad and unclad - High performance, modified, non-halogenated epoxide woven E-glass laminated sheets of defined flamm

BS EN 854-1997

橡胶管及管配件.纺织增强液压型.规范

Gummischlaeuche und-schlauchleitungen. Hydraulichschlaeuche mit Textileinlage. Spezifikation Rubber Hoses and Hose Assemblies-Textile Reinforced Hydraulic Type-Specification Tuyaux et flexibles en caou...

适用范围：This European Standard specifies requirements for five types of textile reinforced rubber hoses and hose assemblies of nominal bore from 5 to 100. They are suitable for use with: - hydraulic fluids in ...

实施日期：1997-03-15

JIS K7019-1999

纤维增强塑料－用±45°拉伸试验测定平面内剪切特性的方法

Fiber-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus and minus 45 degree SIGN tension ...

适用范围：1.1この規格は，±45°引張試験によって，繊維強化プラスチツクの，面内せん断弾性率及びせん断強さを含む，面内せん断特性を求める方法について規定する。…

DIN 65378-1989

航空和宇航;纤维增强塑料;单向层压板检验,对纤维方向的横向拉力试验

Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction

适用范围：The test method covered by this standard serves to determine the tensile strength and modulus of elasticity on unidirectional laminates in 90?direction (transverse to fibre direction). The test is perf...

NF T57-105-1998

纤维增强塑料复合物 弯曲性能的测定

Fibre-reinforced plastic composites. Determination of flexural properties.

GB/T 3356-1999

单向纤维增强塑料弯曲性能试验方法

Test method for flexural properties of unidirectional fiber reinforced plastics

适用范围：本标准规定了单向纤维增强塑料弯曲性能试验的方法。本标准适用于测定单向纤维增强塑料层合板的弯曲强度、弯曲模量和载荷-挠度曲线。对称层合板也可参照采用。

发布日期：1999-02-08  实施日期：1999-08-01

GB/T 16779-2008

纤维增强塑料层合板拉-拉疲劳性能试验方法

Test method for tension-tension fatigue of fiber reinforced plastic laminates

适用范围：本标准规定了纤维增强塑料层合板拉-拉疲劳性能的原理、试验设备、试样、试验条件、试验步骤、试验结果和试验报告等。　　本标准适用于测定连续纤维单向、正交和多向对称铺层增强塑料层合板拉-拉疲劳中值S-N曲线和条件疲劳极限。...

发布日期：2008-06-30  实施日期：2009-04-01

DIN EN 705-1994

塑料管系统--玻璃纤维增强热固性塑料管和配件;回归分析及其使用方法

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994

适用范围：This document specifies procedures suitable for the analysis of data which, when converted into logarithms of the values, have either a normal or a skewed distribution. It is intended for use with the ...

BS 3165-2009

Rubber suction hose and hose assemblies with semi-embedded wire helix for fire-fighting purposes. Requirements and test methods [:BSI BS EN ISO 14557 + A1,BSI BS EN ISO 14557]

实施日期：2009-08-31

GB/T 4550-1984

试验用单向纤维增强塑料平板的制备

Preparation of unidirectional orientated fiber reinforced plastic plates for test purposes

适用范围：本标准适于用缠绕法和真空袋—热压罐法制备试验用单向纤维增强塑料平板。

发布日期：1984-07-07  实施日期：1985-06-01

GB/T 1461-1988

纤维缠绕增强塑料环形试样剪切试验方法

Test method for interlaminar shear strength of ring of filament-winding reinforced plastics

实施日期：1989-05-31

NF C93-780-2-4-2002

Materials for printed boards and other interconnecting structures - Part 2-4 : reinforced base materials clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad.

GB/T 3857-2005

玻璃纤维增强热固性塑料耐化学介质性能试验方法

Test method for chemical resistance of glass fiber reinforced thermosetting plastics

适用范围：本标准规定了玻璃纤维增强热固性塑料耐化学介质性能试验原理、试样、试验仪器、试验步骤、试验结果和试验报告。　　本标准适用于玻璃纤维增强热固性塑料耐化学介质性能的试验，其他纤维增强热固性塑料的耐化学介质性能试验也可...

发布日期：2005-05-18  实施日期：2005-12-01

GB/T 1449-1983

玻璃纤维增强塑料弯曲性能试验方法

Test method for flexural properties of glass fiber-reinforced plastics

实施日期：1984-08-01

JIS K7017-1999

纤维增强塑料－挠曲特征的测定方法

Fibre-reinforced plastics composites -- Determination of flexural properties

适用范围：1.1この規格は，繊維強化プラスチックの曲げ特性を3点曲げ法(A法)及び4点曲げ法(B法)によって求める方法を定める。この規格では標準試験片を規定し，さらに目的に応じて使用する試験片については必要なパラメータを定めた。試験速度の範囲を定める。…

JIS A5210-1994

建筑用陶瓷砌块组件

Ceramic masonry units for buildings

适用范围：この規格は，主として建築物に用いられ，粘土を成形・焼成したセラミック製のメーソンリーユニット(組積単体)(以下,ユニットという。)について規定する。 備考 この規格の中で{}を付けて示してある単位及び数値は，従来単位によるものであって，参考値である。

BS EN ISO 6603-1-2000

塑料.硬质塑料复合轴向冲击性能的测定.非仪器冲击试验

Kunststoffe. Bestimmung des Durchstossverhaltens von festen Kunststoffen. Nicht-instrumentierter Schlagversuch Plastics-Determination of Puncture Impact Behaviour of Rigid Plastics-Part 1:Non-Instrumen...

适用范围：This International Standard specifies methods for the determination of puncture-impact properties of rigid plastics in the form of flat test specimens, such as discs or square pieces, under defined con...

实施日期：2000-06-15

BS EN 61249-2-9-2003

印制板和其他互连结构用材料 第2-9部分:包层和无包层的强化基材 具有规定易燃性的双马来酰亚胺/三嗪改良型或非改良型环氧E-玻璃增强层压片(垂直燃烧试验),铜包层的

Materialien fuer Leiterplatten und andere Verbindungsstrukturen. Kaschierte und unkaschierte verstaerkte Basismaterialien. Kupferkaschierte mit E-Glasgewebe verstaerkte Laminattafeln auf der Basis von ...

适用范围：This part of IEC 61249 gives requirements for properties of bismaleimide/triazine modified epoxide, or unmodified, woven E-glass reinforced laminate sheets of defined flam inability (vertical burning t...

实施日期：2003-08-14