ISO 13347-1-2004

工业风机 标准实验室条件下风机声功率级的测定 第1部分:综览

Industrial fans -- Determination of fan sound power levels under standardized laboratory conditions -- Part 1: General overview

适用范围：ISO 13347:2004 deals with the determination of the acoustic performance of industrial fans. In addition, it may be used to determine the acoustic performance of fans combined with an ancillary device s...

发布日期：2004-08-01  实施日期：2004-08-01

GB/T 7111.1-2002

纺织机械噪声测试规范 第1部分:通用要求

Textile machinery-Noise test code-Part 1:Common requirements

适用范围：本标准规定了在标准条件下测定、表述、验证GB/T 7111.2～GB/T 7111.7所涉及的几类纺织机械的基本噪声发射值的要求，还规定了本噪声测试规范所采用的噪声测量方法以及工作条件和安装条件。　　本标准适用于GB/T 17780所列的所...

发布日期：2002-06-13  实施日期：2002-12-01

DIN 45635-1659-1986

机器噪声测量 空气声测量、包面法 木工机床 板材成形圆锯机的特殊规定

Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; panel sizing machines

NF S31-078-3-1989

Acoustics. Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Part 3 : simple (transition) method for stated values for batches of machines.

NF U64-054-2010

农业食品工业。筛网排料式球磨机和筛网车。综合安全装置。

Food processing machinery - Beam mixers - Safety and hygiene requirements.

BS EN 60749-35-2006

Halbleiterbauelemente. Mechanische und klimatische Pruefverfahren. Ultraschallmikroskopie fuer kunststoffverkappte Bauelemente der Elektronik Semiconductor devices Mechanical and climatic test methods Part 35:Acoustic microscopy for plastic encapsulated electronic components Dispositifs a semiconducteurs. Methodes d'essais mecaniques et climatiques. Microscopie acoustique pour composants electroniques a boitier plastique

实施日期：2006-11-30

ASTM E1780-2004

来自附近固定源的室外声音的测量指南

Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source

适用范围：<p id="s00030">Situations for which outdoor sound level data are required include, but are not limited to, comparison of sound levels with criteria or regulatory limits.</p> <p id="s00031">This guide p...

实施日期：2004-02-01

EN 60728-5-2008

Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment [Superseded: CENELEC EN 50083-5]

BS EN 61029-1-2009

可移动马达控制的电动机床的安全.一般要求

Safety of transportable motor-operated electric tools. General requirements

适用范围：This standard consists of Part 1 and Part 2 and applies to electric motor-operated or magnetically-driventools, intended for indoor and for outdoor use, which have all the following characteristics:a) ...

实施日期：2010-02-28

NF T35-007-2005

涂覆装置 组合槽 安全要求

Coating plants - Combined booths - Safety requirements.

BS EN 12853-2001+A1-2010

Food processing machinery. Hand-held blenders and whisks. Safety and hygiene requirements

实施日期：2001-07-15

NF S31-510-1-2009

Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1 : planning.

NF E63-053-2006

压力机配套工具 中间定位柱的法兰盘

Tool for pressing - Flanges for middle locating pillar.

实施日期：2006-03-01

NF U25-517-2-2012

Agricultural and forestry machinery - Safety requirements and testing for portable hand-held powered brush-cutters and grass-trimmers - Part 2 : machines with back-pack power source.

BS EN 12581-2005+A1-2010

Coating plants. Machinery for dip coating and electrodeposition of organic liquid coating material. Safety requirements

实施日期：2006-01-16

BS EN ISO 3822-2-1996

声学.由供水设施和设备发出噪音的实验室试验.放水龙头的安装和工作条件

Pruefung des Geraeuschverhaltens von Armaturen und Geraeten der Wasserinstallation im Laboratorium. Anschluss und Betriebsbedingungen fuer Auslaufarmaturen und fuer Mischbatterien Acoustics-Laboratory ...

适用范围：This part of EN ISO 3822 specifies the mounting and operating conditions to be used for draw-off taps and mixing valves when measuring noise emission resulting from water flow. The procedures described...

实施日期：1996-01-01

BS EN 12215-2004+A1-2009

Coating plants. Spray booths for application of organic liquid coating materials. Safety requirements

实施日期：2004-11-18

ISO 18738-2003

电梯 运行质量的测量

Lifts (elevators) - Measurement of lift ride quality

适用范围：ISO 18738:2002 specifies requirements and methodology for the measurement and reporting of lift ride quality during lift motion. It does not specify acceptable or unacceptable ride quality. Lift perfor...

发布日期：2003-08-01  实施日期：2003-08-01

NF E63-020-2006

Machine tools - Mechanical presses - Safety.

EN 4250-2001

Aerospace series. Nickel base alloys NI-B41001 (NiCr19Si7B). Filler metal for brazing. Amorphous foil

实施日期：2001-06-01