DIN 13-51-2005

ISO常用米制螺纹 第51部分:过渡配合用外螺纹(以前为密配合螺纹) 公差、极限偏差、尺寸极限

ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes

适用范围：The standard specifies tolerance classes for external screw thread.

实施日期：2005-08-01

EN 14399-10-2009

High-strength structural bolting assemblies for preloading. Part 10:System HRC. Bolt and nut assemblies with calibrated preload

实施日期：2009-03-01

NF E03-004-3-2005

Pipe threads where pressure tight joints are made on the threads - Part 3 : verification by means of limit gauges.

BS 4A 102-2002+A1-2006

Specification for steel bolts (Unified hexagons and Unified threads) for aircraft

实施日期：2002-01-28

BS EN 3006-1994

FE-PA92HT(A286)耐热钢制薄柄长螺纹六角头螺栓.等级:900 MPa(室温)/650℃

Sechskantschrauben,Duennschaft,langes Gewinde,aus hochwarmfestem Stahl FE-PA92HT (A286). Klasse:900MPa (bei Raumtemperatur)/650°C Bolts,Hexagon Head,Relieved Shank,Long Thread,in Heat Resisting Steel F...

适用范围：This standard specifies the characteristics of hexagon headed bolts with relieved shank and long thread, in FE-PA92HT, for aerospace applications. Classification : 900 MPa <up1)> / 650 ℃ <up2)> note:1)...

实施日期：1994-01-01

ISO 724 CORR 1-2009

ISO一般用途米制螺纹 基本尺寸 技术勘误表1

Iso general-purpose metric screw threads. Basic dimensions. Technical corrigendum 1

实施日期：2009-07-15

DIN 13-21-2005

ISO常用米制螺纹 第21部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径1-24.5mm

ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 1 mm to 24, 5 mm

适用范围：This standard applies to the ISO general purpose metric screw threads with a basic profile according to DIN ISO 68-1. It contains the limits of sizes for fine threads from 1 mm to 24,5 mm nominal sizes...

实施日期：2005-08-01

GB 1167-1974

过渡配合螺纹(旋入铸铁、钢体)

Screw threads,transition fits,for mating threads in cast iron or steel

适用范围：本标准规定直径为5?39毫米，螺距为0.8?4毫米，钢制双头螺柱旋入铸铁和钢制螺孔，中径具有过渡配合的螺纹连接。

实施日期：1975-05-01

DIN 44876-1981

带金属的电器管加热体用六角螺纹接套

Hexagonal nipples for electrical tubular heating elements

适用范围：Hexagonal nipples for electrical tubular heating elementsFür den Geltungsbereich dieser Norm bestehen keine entsprechenden regionalen und internationalen Normen.

DIN 13-22-2005

ISO常用米制螺纹 第22部分:优选公差等级的细牙螺纹极限尺寸 公称螺纹直径25-52mm

ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm

实施日期：2005-08-01

NF E25-801-7-2008

High-strength structural bolting assemblies for preloading - Part 7 : system HR - Countersunk head bolt and nut assemblies.

DIN 76-3-1977

梯形螺纹、锯齿螺纹和圆形螺纹及其他粗牙螺纹的螺纹尾部和螺纹退刀槽

Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch

适用范围：Run out and undercut for metric trapezoidal screw threads, knuckle screw threads, bultress screw threads and other screw threads of coarse pitches

BS EN 3789-2001

管联接器8°30' 带外螺纹的防护管塞

Luft-und Raumfahrt. Rohrverschraubung 8 0'. Schutzstopfen mit Aussengewinde Pipe Coupling 8 Degrees 30'-Protective Plugs with External Threads Serie aerospatiale. Raccordement 8 0'. Bouchons de protect...

适用范围：This standard specifies the characteristics for plastic plugs for pipe couplings 8°30′ used to protect the couplings during transportation, storage and removal of units in system, for aerospace applica...

实施日期：2001-10-15

GB/T 79-2007

内六角圆柱端紧定螺钉

Hexagon socket set screws with dog point

适用范围：本标准规定了螺纹规格为M1.6～M24、性能等级为45H、A1-12H、A2-21H、A3-21H、A4-21H、A5-21H、CU2、CU3和AL4、产品等级为A级的内六角圆柱端紧定螺钉。　　如需其他技术要求，应从现行标准（如GB/T 193、GB/T 3098.3、GB/T 3098.16、GB/T...

发布日期：2007-07-02  实施日期：2007-12-01

CB 1115-1984

外螺纹三通、四通接头

适用范围：类型、基本参数和尺寸 外螺纹三通、四通接头的类型及基本参数按表1。

发布日期：1984-11-20  实施日期：1985-10-01

BS EN 2931-1994

FE-PA92HT(A286)耐热钢制长螺纹薄柄T型头螺栓.等级:900MPa(室温)/650℃

T-Kopfschrauben,Duennschaft,langes Gewinde,aus hochwarmfestem Stahl FE-PA92HT (A286). Klasse:900 MPa (bei Raumtemperatur)/650°C Bolts,T-Head,Relieved Shank,Long Thread,in Heat Resisting Steel FE-PA92HT...

实施日期：1994-01-01

BS EN 148-1-1999

呼吸保护设备.面具用螺纹.标准螺纹连接

Atemschutzgeraete. Gewinde fuer Atemanschluesse. Rundgewindeanschluss Respiratory Protective Devices-Threads for Facepieces-Part 1:Standard Thread Connection Appareils de protection respiratoire. Filet...

适用范围：This European Standard is applicable to standard threads for respiratory protective devices. This standard does not apply to diving equipment and to positive pressure demand breathing apparatus.

实施日期：1999-07-15

DIN 7584-1980

小型家用水管配件. 公称压力为10的平密封带外螺纹钢管头

Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar

适用范围：Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar

GB/T 3289.10-1982

可锻铸铁管路连接件型式尺寸 三通 内外丝三通

Malleable cast iron pipe fittings--Type size--Tees,male and female tees

实施日期：1983-10-01

BS EN 2413-1995

镀镉合金钢带肩薄六角头紧公差短螺纹螺栓.等级:1100MPa(室温)/235℃

Sechskant-Passschrauben,kleiner Kopf,kurzes Gewinde,aus legiertem Stahl,verkadmet. Klasse:1 100 MPa (bei Raumtemperatur)/235°C Bolts,Shouldered,Thin Hexagonal Head,Close Tolerance Shank,Short Thread,in...

适用范围：This standard specifies the characteristics of bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification : 1 100 MPa <up1)> / 235 ℃ <up...

实施日期：1995-01-01