BS A 358-2-2000

MJ-Gewinde. Grenzmasse fuer Schrauben und Muttern MJ Threads-Part 2:Limit Dimensions for Bolts and Nuts Filetage MJ. Dimensions limites pour vis et ecrous Supersedes BS 6293-2:1994

实施日期：2000-01-15

EN ISO 1478-1999

Tapping Screws Thread ISO 1478:1999

实施日期：1999-08-01

BS EN 27721-1992

沉头螺钉的头形和测量

Senkschrauben. Gestaltung und Pruefung von Senkkoepfen Countersunk Head Screws-Head Configuration and Gauging (ISO 7721:1983) Vis. tete fraisee. Configuration de la tete et verification par calibre

适用范围：This International Standard specifies the characteristics of head configurations of slotted and recessed countersunk head screws, and recommends a gauging method for the head dimensions laid down in th...

实施日期：1992-01-01

NF E25-801-9-2009

High-strength structural bolting assemblies for preloading - Part 9 : system HR or HV - Direct tension indicators for bolt and nut assemblies.

BS 4A 102-2002+A1-2006

Specification for steel bolts (Unified hexagons and Unified threads) for aircraft

实施日期：2002-01-28

DIN EN ISO 898-1-2013

碳钢和合金钢制紧固件的机械性能 第1部分:带指定特性的螺栓、螺钉和螺柱 粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread (ISO 898-1:2013)

实施日期：2013-05-01

DIN EN ISO 3266-2010

一般起重用4级锻钢吊环螺栓

Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010); German version EN ISO 3266:2010

实施日期：2010-10-01

BS 4A 111-1993

Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks

实施日期：1993-01-01

GB/T 78-2000

内六角锥端紧定螺钉

实施日期：2001-02-01

EN 14399-7-2007

High-strength structural bolting assemblies for preloading. Part 7:System HR. Countersunk head bolt and nut assemblies

实施日期：2007-12-01

ISO 898-1-2009

碳钢和合金钢制紧固件的机械性能 第1部分:带指定特性的螺栓、螺钉和螺柱 粗牙螺纹和细牙螺纹

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread

适用范围：ISO 898-1:2009 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners — th...

发布日期：2009-04-01  实施日期：2009-04-01

BS EN 2939-1994

FE-PA92HT(A 286)耐高温钢制头部加螺纹的翼型十字槽100°埋头螺钉.等级:900MPa(室温)/650℃

100 Senkschrauben,Fluegelkreuzschlitz,Gewinde,bis kopf,aus hochwarmfestem Stahl FE-PA92HT (A286). Klasse:900 MPa (bei Raumtemperatur)/650°C Screws,100 Degrees Countersunk Head,Offset Cruciform Recess,T...

适用范围：This standard specifies the characteristics of screws with 100° countersunk head with offset cruciform recess, threaded to head, in FE-PA92HT, for aerospace applications. Classification : 9...

实施日期：1994-01-01

BS EN 2887-1995

钝化耐蚀钢制头部加螺纹的标准六角头螺栓.等级:600MPa(室温)/425℃

Sechskantschrauben,Gewinde annaehernd bis Kopf,aus korrosionsbestaendigem Stahl,passiviert. Klasse:600 MPa (bei Raumtemperatur)/425°C Bolts,Normal Hexagonal Head,Threaded to Head,in Corrosion Resisting...

适用范围：This standard specifies the characteristics of bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated. Classification : 600 MPa <up1)>/ 425 ℃ <up2)> note:1) Minimum t...

实施日期：1995-01-01

BS A 309-1994

Luft-und Raumfahrt. Sechskantschrauben mit grossem Kopf,Voll-oder Duennschaft und langem MJ-Gewinde,aus metallischem Werkstoff,mit oder ohne Oberflaechenschutz,Festigkeitsklassen = 1100 MPa. Masse Bolts,Large Hexagonal Head,Normal or Pitch Diameter Shank,Long Length MJ Threads,Metallic Material,Coated or Uncoated,Strength Classes Less Than or Equal to 1100 MPa-Dimensions (ISO 9256:1993) (S) Aeronautique et espace. Vis a tete hexagonale large,avec tige normale ou de diametre egal au diametre sur

实施日期：1994-01-01

BS A 307-1994

Luft-und Raumfahrt. Schrauben mit Keilzahnantrieb,Voll-oder Duennschaft und langem MJ-Gewinde,aus metallischen Werkstoff,mit oder ohne Oberflaechenschutz,Festigkeitsklassen = 1100 MPa. Masse Bolts,Normal Spline Head,Normal or Pitch Diameter Shank,Long Length MJ Threads,Metallic Material,Coated or Uncoated,Strength Classes Less Than or Equal to 1100 MPa-Dimensions (ISO 9254:1993) (S) Aeronautique et espace. Vis a tete cannelee normale,avec tige normale ou de diametre egal au diametre sur flancs,e

实施日期：1994-01-01

BS 4A 112-1992

Specification for cadmium-plated steel shear bolts (Unified hexagons and Unified threads)

BS EN 2937-1994

FE-PA92HT(A286)耐高温钢制头部加螺纹六角头螺钉.等级:900 MPa(室温)/650℃

Sechskantschrauben,Gewinde,bis kopf,aus hochwarmfestem Stahl FE-PA92HT (A286) Klasse:900 MPa (bei Raumtemperatur)/650°C Screws,Hexagon Head,Threaded to Head,in Heat Resisting Steel FE-PA92HT (A286) Cla...

适用范围：This standard specifies the characteristics of hexagon headed screws, threaded to head, in FE-PA92HT, for aerospace applications. Classification : 900 MPa <up1)> / 650 ℃ <up2)> note:1) ...

实施日期：1994-01-01

BS 4A 102-2002+A2-2012

航空器用钢制螺栓(统一六角形和统一螺纹)

Specification for steel bolts (Unified hexagons and Unified threads) for aircraft

发布日期：2002-01-28  实施日期：2002-01-28

GB/T 2-1985

紧固件 外螺纹零件的末端

Fasteners--Ends of parts with external thread

实施日期：1986-05-31

BS EN ISO 15483-1999

带攻丝螺纹的十字凹槽半埋头自攻螺钉

Linsensenk-Bohrschrauben mit Kreuzschlitz mit Blechschraubengewinde Cross Recessed Raised Countersunk Head Drilling Screws with Tapping Screw Thread Vis autoperceuses a tete fraisee bombee a empreinte ...

适用范围：This International Standard specifies the characteristics of cross recessed raised countersunk head drilling screws with tapping screw threads from ST2,9 up to and including ST6,3.

实施日期：1999-11-15